Question about Nova Development Photo Explosion Deluxe Version 3

3 Answers

When I try change folder to obtein different picture, the program not work any more

Posted by on

  • 2 more comments 
  • ayala_2803 Sep 25, 2009

    I did that, the program freezer and the say; "Unlead photo express has be stoping working" and then close the program

    When start the program open one box and say to: Load MPEG vio driver error

    C: Programa/Files Nova Develoment/Photo exprosion deluxe/ulead.dat/PE.ini

  • ayala_2803 Sep 25, 2009

    I use Window vista

  • ayala_2803 Sep 25, 2009

    When I try change folder to obtein other picture the program close.
    When start the program said: "Load MPG vio driver error"
    I use window vista

  • ayala_2803 Sep 25, 2009

    When I try change folder to obtein different picture, the program not work any more
    I reinstall the program but the result is the same, the program stop and say; "Unlead photo express has be stoping working" and then close the program
    Other thing: When the program start, one box is open and say: Load MPEG vio driver error
    C: Programa/Files Nova Develoment/Photo exprosion deluxe/ulead.dat/PE.ini

    I use Windows vista

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 77 Answers

I've seen this issue before - it was being caused by a temporary file. I'd recommend installing and running a free program called CCleaner - www.ccleaner.com - after you install and run that program, try it again. If it's still causing an issue, try repairing/reinstalling the program - go to the control panel in windows, go to add/remove programs, and highlight nova development photo explosion and see if there's a "repair" option when you highlight it - if not, remove and reinstall it (assuming you have the original installation disk)

hope this helps - good luck!!

Posted on Sep 26, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 497 Answers
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

In what way does it not work ? does the program suddenly close or freeze. you may want to try reinstalling the program.

also are you using xp, vista or other operating system ?

Posted on Sep 25, 2009

  • Roberta Smith
    Roberta Smith Sep 25, 2009

    You need to change the compatability of that program. To do this go to your start menu--control panel--programs you will see under Programs and features the option to use an older program with this version of windows. a wizard will pop up..follow the prompts and choose to run it under XP.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot see pc MOV or JPG files on flash drive in Canon SX230


Thanks very much for responding to my problem.
It seems Canon will not allow edited pictures or video to transfer from PC to their digital cameras for viewing.
steps to my problem:1. my canon SX230 created all the parts for my WMV video in MOV format originally.
2. created a movie (WMV format) in Windows Live Movie Maker. Works well and plays on my PC (windows 7).
3. after WMV completed - converted to HD MOV format in 2 different file convert programs and with 2 different HD MOV resolution settings on Both programs. WMV resolution is 1920x1080 (HD). ALL 4 MOV videos play well on my PC in 2 different programs.

Steps getting Canon to see video in playback mode.1. copy MOV video from PC to Flash drive in my card reader in same folder as my original JPG & MOV files, then inserted into camera - does not recognize file.
2. copy MOV file from PC to camera with USB cable. Windows error message. Wrong format - would not copy.
3. Formatted flash drive in camera. Took picture to create DCIM folder, JPG image, and CANONMSC folder with M0104.CTG file .Deleted CANONMSC folder. Copied my MOV video from PC to camera (USB cable). this time copy successful. However camera does nor recognize file.
5. tried again except deleted M0104.CTG file but not the CANONMSC folder. no luck.
It seems Canon will not recognize any file that has not originated in the camera AND has not been altered. Upon researching answers on the NET - many other users of Canon cameras have the same problem with no luck.

Apr 23, 2012 | Cameras

1 Answer

Cannot download pictures from phone to computer


Please try the steps below and let me know........

1.Step 1
Double click Kodak EasyShare on your desktop to launch your program. If necessary, use the download link in the resource center to setup and install the program first. After launching your program, click "My Collection" to see your albums. Choose an album on the left side and click it to view its pictures. Click the "Slideshow" button to view all the pictures as a slideshow.
2.Step 2
Click the add pictures button to insert new pictures into EasyShare. Select the location of your pictures. When the new folder opens, select the pictures that you want to upload. Click the "Entire Folder" button to select all pictures. To select individual pictures, press and hold the "Ctrl" button, then click each individual picture. When finished, click "Done."
3.Step 3
Click on a picture to highlight it and then click the "Edit" button to change the brightness, contrast and size as desired.
4.Step 4
Click on a particular picture, then click the "Edit" button at the top of the interface to toggle through different effects. Click the "Scene" effects button to select from a black and white look, a sepia tone, a sunset tone or a forest look. Once you have selected your effect, click the "Accept" button to make changes to your picture.
5.Step 5
Click the "Fun" effects button and then choose from spotlight effect or coloring book effect. Choose the fish eye effect to give your pictures a fish lens look. Select cartoon effect to give your pictures an abstract look. When you have chosen your effect, click the "Accept" button to make changes to your picture.
6.Step 6
Drag your pictures to the picture tray on the right side of the screen to email your pictures. Next, click the "Email" button on the left. When the new email window opens, insert your recipient's email address, type in a subject and a short message. Click the "Send Invitation" button.
7.Step 7
Click the "Print at Home" tool on the left side. Select your paper size, print size and printer. Make sure your printer is turned on and connected to your computer. Click the print button to begin printing your pictures.
8.Step 8
Click the "Order Prints Online" tool and follow the guidelines to select print order options or different printing formats such as on mugs, t-shirts and calenders

Aug 10, 2010 | Computers & Internet

2 Answers

My digital pictures are stored as Photoshop Starter Edition which expired a long time ago and I keep getting that annoying message. How do I resave them in a different file (Microsoft?) without losing...


Change the association

Open explorer window
Navigate to the image file you want to change association, e.g psd, img tiff

Right click on file
Select Open With
Choose the program you would like to have open the files
You can also set the default program to open the files, just select choose default program

Jul 11, 2010 | Microsoft Windows XP Home Edition

1 Answer

My display picture will not change in messenger box


An easy way to fix this problem would be to:
1) close yahoo messenger
2) using windows explorer go into the following folders:  Program Files/Yahoo/Messenger
3) Now delete the folder *cache*
4) Restart Yahoo messenger, and you'll be able to change your Display picture.

Easy peasy Lemon Squeezy!

Jun 02, 2009 | Yahoo Messenger

1 Answer

I still nees help on my camera


I suspect that the pictures may be there, but in a different folder on the memory card. If you open your memory card on your computer, you will see several folders. Try opening each folder to see if any images are there. I would also suggest trying another memory card (a new one), take a picture, then upload it to your image software program. Give that a try and let me know if you find your images. Hope that helps!

Jun 26, 2008 | Cameras

2 Answers

Error B8e7b69c


I have had this issue happen to me when trying to print a photo from my windows picture program and from the window photo gallery program on Vista. I believe the problem is a compatibility issue with the windows Vista photo programs. I was able to print very well using another photo program. So i suggest printing from another photo program. My camera came with one that is pretty basic and good at fine tuning the pictures. I used the Canon zoombrower ex program and it printed all my pictures well. I think most digital cameras come with some type of photo editing program. You should try printing from it instead widows photo folders or windows photo gallery. Using my camera's photo software solved my issue well. try this out to see if it works for you. good luck

Mar 20, 2008 | HP OfficeJet K80 All-In-One InkJet Printer

2 Answers

Acer orbi cam not working


try to download the driver/application from acerpanam.com.

Jan 22, 2008 | Acer Aspire 5500 5570-2609 Laptop

3 Answers

Hi, please help


Here are couple of links that look like they may help.

Orbicam1

or

Orbicam2

There appear to be multiple different versions and solutions of this problem. It looks like it may be a long search -- Good luck.

Dec 10, 2007 | Acer Aspire 5100 Notebook

2 Answers

Orbicam default picture setting


I believe there is an option in the settings (Start, Orbicam) to change the default folder location.

Nov 29, 2007 | Acer Aspire 5100 Notebook

Not finding what you are looking for?
Nova Development Photo Explosion Deluxe Version 3 Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nova Development Computers & Internet Experts

David Payne
David Payne

Level 3 Expert

14161 Answers

Computer Links

Level 3 Expert

2385 Answers

John Hong
John Hong

Level 3 Expert

787 Answers

Are you a Nova Development Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...