Question about HP DeskJet F380 All-In-One Printer

1 Answer

Catridge problem#2 - HP DeskJet F380 All-In-One Printer

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Hi,
You can try this:(But be specific the next time.)
1st :Take out the power cord and press the Power button and hold it for 20 sec and realese the button and plug back the Power cord.Try if any problem.
2nd:Take out the catridges and clean the copper contacts, Try to print an Allignment page.(If doesnt work)
3rd:Plug out the Power cord and Press and hold the # and the 3 button together and holding the button plug in the power cord and realese the button once the power comes up.
4th:Try with different catridges and call HP for replacement.

Let Me Know,
Best Wishes.
Suvrajit

Posted on Oct 03, 2009

Testimonial: "thank you verry verrrry much.."

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

In my printer though i install new catridges but the catridge attention lights are blinking. how to stop that blinking???


iphone.jpg In my printer though i Problem with the PDAs in my printer though i install new catridges but the catridge attention lights are blinking. how to stop that blinking??? - By himadripal05 2 hours ago

Oct 26, 2010 | Computers & Internet

1 Answer

Canon mp460 printer. refilled cartridge not recognised


Dear Sir,

This is deffinately due to catridge circuit problem.Canon suggest that we have to replace emptied catridges with new genuine canon catridge they dont suggest refilling and also not give any support for refilling catridges. So you can replace catridge with new one.
This Happens due to weakining of catridge circuit portion or may long period printer not in use.
If you not want to replace catridges i will give you the possible hints it may fix refilled catridges.
1.Clean the catridge circuit portion with soft cloth,care must be taken that there is no smudge or ink traces on catridge circuit.
2.Clean the ciruit of printer catridge placing box present inside the printer .wipe out the any sumdge or ink traces.
Then re install the catridges. give the print if it shows error press resume button continuosly. I think it will fix your problem.
If it is not solution is replace the catridge with new one.

good luck

Aug 26, 2009 | Office Equipment & Supplies

1 Answer

My printer is epson fx 1170 it prints half word


this is due to catridge problem,
1.remove your catridge, use cleaner solvent to wet the head of catridge for 2mts and wipe it or clean it with tissue paper
2. check your catridge has ink or finish..
3. due to dry head and not enough of ink, this type of problem comes frequently



Jun 23, 2009 | HP Photosmart C6380 All-In-One InkJet...

1 Answer

My printer prints but no document is printed on the paper. Yes I have ink


1.remove your catridge wet your catridge head with headcleaner
2. clean your catridge head with tissue paper
3. do this two or three times
4. fix your catridge and take print

Jun 22, 2009 | Epson Stylus C60 InkJet Printer

1 Answer

CANNOT FIT IN THE REMOVED INK CATRIDGES INSIDE CATRIDGE HOLDER


I located a printer repair service prson locally who fixed the problem, taking printer to his service centre.Now it's OK.

May 05, 2009 | Office Equipment & Supplies

1 Answer

CARRIAGE JAM


In this case unplug the power supply from the Printer........... 1. Open the Printer Cover.......... 2. Remove both the Catridges from the Printer............ 3. Move the Catridge Carrier which holds the catridge from right to left and from left to right for about 10 times............ 4. Try to make a copy without the catridges........If this works and it gives a Blank Page out............ 5. Insert both the catridges turn the printer off and turn it on again........... 6. Now it should work fine........ Good Luck......

Feb 01, 2009 | HP Officejet 4355 All-In-One InkJet...

1 Answer

Paper jam


In this case unplug the power supply from the Printer........... 1. Open the Printer Cover.......... 2. Remove both the Catridges from the Printer............ 3. Move the Catridge Carrier which holds the catridge from right to left and from left to right for about 10 times............ 4. Try to make a copy without the catridges........If this works and it gives a Blank Page out............ 5. Insert both the catridges turn the printer off and turn it on again........... 6. Now it should work fine........ Good Luck.....

Jan 23, 2009 | HP DeskJet 3940 InkJet Photo Printer

1 Answer

Printer problem (paper Jam)


In this case unplug the power supply from the Printer........... 1. Open the Printer Cover.......... 2. Remove both the Catridges from the Printer............ 3. Move the Catridge Carrier which holds the catridge from right to left and from left to right for about 10 times............ 4. Try to make a copy without the catridges........If this works and it gives a Blank Page out............ 5. Insert both the catridges turn the printer off and turn it on again........... 6. Now it should work fine........ Good Luck.....

Jan 23, 2009 | HP PSC 1600 InkJet Printer

1 Answer

Carriage Jam


In this case unplug the power supply from the Printer........... 1. Open the Printer Cover.......... 2. Remove both the Catridges from the Printer............ 3. Move the Catridge Carrier which holds the catridge from right to left and from left to right for about 10 times............ 4. Try to make a copy without the catridges........If this works and it gives a Blank Page out............ 5. Insert both the catridges turn the printer off and turn it on again........... 6. Now it should work fine........ Good Luck......

Jan 18, 2009 | HP Officejet 4110 All-In-One InkJet...

1 Answer

Printer MP160 service error 5010 after refill catridge


I had refilled the catrige, then when I start to print a 'service error' window will appear. At the LCD screed shows E.. 4 ..2. I believe the printer simply assume the catridge is depleted, but how can it happened as I already just refilled it.
How to make printer detected the catridge as a full? I really hope you can solve and make my refilling mission succesful and my printer work again.

Aug 13, 2008 | Canon PIXMA MP160 All-In-One Printer

Not finding what you are looking for?
HP DeskJet F380 All-In-One Printer Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...