Question about Kodak EASYSHARE 5100 All-In-One Printer

2 Answers

When I put a new color ink cartridge in, (and I don't print a lot in color), in just a few days, my printer says that my color ink level is low and I will need to replace the cartridge soon. I have bought new cartridges and get the same response.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 101 Answers

Hi,

You may try the steps below.
1.Remove the ink cartridges.
2.Reseat the printhead.

a. Lift the printhead release latch
b. Reseat the printhead, pushing firmly on the white label on the printhead (if provided) or the center of the printhead, until it clicks into place.

NOTE: You may also visit www.kodak.com/go/printheadsupport for demonstration on reintalling the printhead

3. After the printhead has been reseated, re-insert the ink cartridges into the printhead, make sure that the cartridges snap into place.
4. Close the access door.
5. wait for the printer to initialize.

If issue persists, printhead or the printer itself needs to be replaced. Call 1.800.421.6699


Thanks.

Regards,

Neerak21

Posted on Sep 24, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

On my esp 3 I replaced new ink, still there was a low ink light. I took out the printhead and simply cleaned it carefully, Proplem solved

Posted on Nov 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't my printer print black ink?


U may want to check the settings, sometimes with a few printers I've owned they give an option of using only color inks in cases where the black ink is out.

Aug 01, 2014 | Lexmark S415 All-in-One Wireless Color...

1 Answer

HP7780 not printing any color


Go into printer properties and check to make sure you don't have "black ink only" selected. If that's not the case, use your printer tools to see the estimated ink level for your color cartridge. If not low, try removing the cartridge and and dabbing a wet paper towel over the bottom of the cartridge to see if any ink comes out. Sometimes this will get the ink moving again. Otherwise, replace the color cartridge.

Sep 07, 2011 | HP Officejet Pro L7780 All-In-One InkJet...

1 Answer

My documents will not print the colored part. just Black and white


I would first check to see how low the color cartridge is. If it is out of ink, you will need to replace it.
Your Lexmark has two cartridges, one for colors and one for black.
To check the level of the ink cartridges, go to the Lexmark Solution Center. This is the software that was installed to run you Lexmark printer.
Check the cartridge ink level images that appear on each tab. If a cartridge is low, or if you have received an Ink Low message on the computer screen, install a new cartridge. An empty or low cartridge is marked with an exclamation point ( ! ).

To order print cartridges:

1 }}--> }}-->Open the }}--> }}-->Lexmark Solution Center .

2 }}--> }}-->Click the Contact Information tab.

3 }}--> }}-->Click Ordering Ink and Supplies.
For help installing a cartridge, go to How to install the print cartridge.

Dec 30, 2010 | Lexmark X6150 All-In-One InkJet Printer

2 Answers

Bland and color cartridges have been refilled but


Ink level counter (program) didn't read actually ink at ink tank. Brand new cartridge ink level counter 100% (full), and ink 100% (about 10 ml). After may printing, ink will dry out, and ink level counter reach zero (ink out). Printer will not allow print anymore, even have refilled, because ink level read "ink out". For canon type, you just to release ink level counter, and counter just stop, but printer will allow to print. Press stop/reset button for about 30 second.

Mar 15, 2010 | Canon PIXMA MP190 All-In-One InkJet...

1 Answer

We have a Dell 944 showing Error 1102 consult user guide...cannot find the user guide. We just replaced color ink cartridge with a re-processed one ordered online. Please advise...many thanks!.


Hi there
Dell Printer 944 error message 1102
Please unplug the printer from the wall. Now remove the power brick from the back of the printer for 60 seconds. Now plug everything back in. This will reset any error messages the printer has. Now open the printer with the power on and the cartridges should go to the center to be replaced. Take out both Dell Series 5 ink cartridges and make sure the tape is off the cartridges and insert both back in and make sure the seat properly and latch. Close the printer and it should print an alignment page. If you still get the error message

Why does my Dell ink cartridge level still show up as "low ink" after refilling them?
Dell ink cartridges have a sensor that reports the ink level as low once it reaches a certain level. The sensor can not
be reset. If you refill an ink cartridge that previously reported low ink, it may print fine, but the sensor will always
report low ink. Buying or replacing ink cartridges with new Dell cartridges will resolve the low ink message.

Dell discourages ink refills. Refilling ink may lead to print quality problems, and even eventual hardware problems.
This post is in no way a validation of refilling ink cartridges.

Why my printer is reporting “low ink" after using refilled/remanufactured ink cartridges?
Most ink cartridges have sensors that report the ink level. The “Low Ink” is usually the last sensor (fuse) before
running out of ink.

Since the sensors are fuses that open when the ink level drops, they cannot be reset. If you are using refill or
remanufactured ink cartridges, the best thing to do is to disable “ink alerts” on the printer’s software so you don’t keep
getting “low ink” messages.

To disable “Ink Alerts” on Dell inkjet printers:
1. Open the Dell printer software (All-In One Center, Tool Box, etc)
2. Go to Settings
3. Advanced
4. More Options
5. In the “Appearance Mode, window, check “Never display the Printing Status window” and “Display the low
ink alert only when the cartridges are almost empty.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Feb 23, 2010 | Office Equipment & Supplies

1 Answer

Put in new ink cartridge -- won't print


Try lifting up the cover. If the ink level is low in a print cartridge, the Print Cartridge Status light stops flashing. If the problem is not related
to low ink, the light continues to flash after the cover is opened. It might be that the new cartridge is defective. Check the connections and see if there isn't anything keeping it from making contact.

Jan 26, 2009 | HP DeskJet 920c InkJet Printer

1 Answer

I have a new canon mp210 printer ink is low i bought new ink to replace old their is no ink cartridges in printer. When i look at the pictures to load new ink and put it in alarm light is flashing


Even if the ink level is low, you can continue printing.Press the paperfeed knob for 5 seconds. inklevel indicator will stop now.
Sometimes a new (or refilled) cartridge is not recognised correctly.
When one color is really mt, stop printing and replace inmideatly the colorcartridge.Printing or scanning without the 2 cartridges in place is impossible.

Dec 10, 2008 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

Printer Always Indicates Ink is Low or Cartridge is Incorrect


To get rid of the low ink warnings google the specific error message with 'ink refill' and look for 'engineers reset' or similar ..

NB. Dell printers (re-badged Lexmarks) are notorious for ink usage and high costs .. so my best recommendation would be to throw it away and purchase something else ..

Nov 30, 2008 | Dell 922 All-In-One InkJet Printer

1 Answer

Canon pixma mp210 and compatable ink cartridges


Try pushing the reset button for about 5 seconds. This has worked for me.

Oct 27, 2008 | Canon PIXMA MP210 Photo All-In-One Printer

3 Answers

Reset Ink levels for canon mx310


How to reset Canon MX310 printer low ink signal

1. Power off the printer.

2. Holding the stop/reset button, press and hold power button also. Hold both buttons together for 5 secs.

3. Still holding the power button, release the stop/reset buton, then press the stop/reset button twice.

4. Release power button (the screen should now say 'Service Mode').

5. Wait until the power button lights steady green, then press the stop/reset button three times with a 3 sec space between each press. On the 3rd press the indicator should turn steady orange.

6. Press the power button once, (the orange light should go off).

7. Open the printer and remove both cartridges. Wait for 10 seconds. Replace the cartridges and close printer. Wait for 30 seconds.

8. Press the power button, and wait until printer has shut down.

9. Press power button to power up. The printer will feed one piece of paper, then ask you to set the language.

10. The page counter is now reset! Enjoy.

Jul 29, 2008 | Canon PIXMA iP4200 InkJet Photo Printer

Not finding what you are looking for?
Kodak EASYSHARE 5100 All-In-One Printer Logo

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Cindy Wells

Level 3 Expert

5058 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...