Question about Innovage Jumbo Remote Control

1 Answer

I bought a universal jumbo remote and i followed instructions i to program it to my Jvc tv but it does not work can u help?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,335 Answers

Make sure you try every code in the list for your JVC TV.
The codes for your Jumbo Universal Remote to control a JVC television are 013, 054, 055, 060, 065, 067, and 089.

To program your remote by entering a code, follow these steps:

  1. Turn on your TV.
  2. Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
  3. Press the TV button on the remote so that the LED blinks once and then remains solid red.
  4. Enter the first set of 3-digit codes from the list. The LED will blink once every keypress. After the 3rd digit, the red LED will turn off indicating that the code was recognized for the device. If the code was not compatible, the LED will flash several times and you need to return to step 2 to try that code again or to try the next code in the list.
  5. After the LED has turned off, aim the remote at the TV and press ON/OFF. If the device turns off, you have used the correct code and the remote was successfully programed. If the device does not power off, return to step 2 and try again with the next code in the list.
To have the remote try each TV code it knows one at a time, follow these steps:
  1. Turn on your TV.
  2. Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
  3. Press the TV button on the remote so that the LED blinks once and then remains solid red.
  4. Press the ON/OFF button slowly and repeatedly until the TV turns off. The LED will blink once each time you press the ON/OFF button.
  5. Once the TV turns off, press the ENTER button to store the code and the LED will turn off.

I hope that helps.

Posted on Oct 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a universal control and i don't have the codes for it to work the tv


    Remote Control Code List

    www.jumboremotecontrol.com/remote_control_code_list.html
    Jumbo Universal Remote Control · 8 Device ... Programing codes for the remote. If you do not see your device listed, you can use the code search feature to program the device into the remote. TV Codes ... JVC, 013,054,055,060,065,067,089.‎Guide to Programming the ... - ‎Download the Manual - ‎8 Device Learning Jumbo ...

    What is the universal control remote code for a JVC television?

    www.ask.com > Technology > Television & Video
    JVC universal codes can also be found on the instruction sheet or manual guide that comes with the remote control or television set. If these universal codes do ...

    JVC Remote Codes

    remote-codes.findthedata.com/l/163/JVC-Remote-Codes
    A list of TV, HDTV, DVD, Receiver, Audio, Amplifier and and VCR remote codes forJVC. images for codes for universal remote control jvc

Jan 03, 2016 | JVC AV-32D305 32" TV

1 Answer

What is the universal remote control code an JVC TV?


Hi,

The codes for JVC TV to program universal remote are 159, 013, 012, 182, 054, 060, 065, 066, 067, 123, 157, and 158. This depends on the BRAND of the Universal Remote you are using. These codes are compatible with Innovage Universal Remote. For instructions on how to apply this, go to this link:
http://www.ubergizmo.com/2007/04/innovage-jumbo-universal-remote/

Thank youfor visiting FixYa! We answer yourconcerns promptly for FREE. Please spare a few seconds to click on YES buttonin return. Have a good one!

Jun 06, 2011 | JVC AV-21meu 21" TV

1 Answer

The sharper image jumbo universal remote jvc tv


I found that this website should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/

Jan 04, 2010 | Televison & Video

1 Answer

I need instructions on how to set my innovage jumbo universal remote to my jvc tv? from start to finish please


Turn the device on. Press and hold the T.V. button until the red light indiator stays on. Press the three digit code to the tv and if the light goes off your programmed. Here are some of the codes for J.V.C. T.V. 007,010,012,031,036,078,086,103,22,125,126 try all these until your tv get's programmed...

Oct 01, 2009 | Innovage Jumbo Remote Control

1 Answer

I need instruction on how to program my JVC tv with an innovage jumbo universal remote


Download your innovage jumbo universal remote manual here and look up the codes they have for JVC TV's.

If this was helpful please rate the solution.

Thanks.

Mar 07, 2009 | Televison & Video

2 Answers

Universal Remote iwave


I Have The Codes,But No instructions!! Big IWave . 0054-Philips Hitachi-0145 JVC-0053 LG- 0178 OR 1265

Jun 09, 2008 | Hitachi 50HDA39 50 in. Plasma HDTV

1 Answer

INSTRUCTIONS NEEDED FOR THE SHARPER IMAGE - JUMBO UNIVERSAL REMOTE


..check it out....

http://www.blurtit.com/q717681.html

Feb 17, 2008 | Televison & Video

5 Answers

Instructions for Programming Innovage Jumbo Universal Remote


You can download documentation for the Innovage remote here:

http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/innovage/jumbo-manual.zip&area=other

Dec 31, 2007 | Televison & Video

3 Answers

Tv remote


how do i enter the codes to program my tv

Oct 30, 2007 | Universal RF30 Remote Control

Not finding what you are looking for?
Innovage Jumbo Remote Control Logo

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Innovage Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

The Knight
The Knight

Level 3 Expert

74136 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you an Innovage Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...