Question about Logitech QuickCam Messenger Web Camera
1st You download Webcam Driver.
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.
Posted on Sep 18, 2013
My logitech 8.3.0 does not attach to either stand..slips right out
Posted on Jan 04, 2011
and go into setup in skype and setup the video chat to use your camra. if that doesnt work.. try uninstalling the camera and software and starting over with new updated drivers.. be sure to load the drivers before you plug in the camera.
Posted on Jan 18, 2008
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: video won't work w/skype
Go to "TOOLS", click on "OPTIONS," Then go to
"Audio Settings" and click on it. Make sure both the Microphone and
Speaker's are correctly chosen. Then
"make a free test call." Wait till the voice tells you to
record. Then when finished talking wait for the test persons voice to
insure your audio transmission is working. Then go back to options and
test your video settings. Click on Video Settings and proceed to set up
you video camera. Also, you can visit this site for additional
information to setup video.
Hope this helps. Bud
Posted on Jan 30, 2009
see this can be work for you
Posted on Jul 11, 2009
Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ )
set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.
B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.HTML )
set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on "Open the call setup assistant" and follow the instructions on the left window.
C. Windows Live Messenger:
After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
D. AIM (AOL) Messenger:
On the VIM sign-in window, click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends. Hope this helps. Bud
Posted on Aug 24, 2009
Tips for a great answer:
Jan 28, 2013 | Logitech Quickcam Chat Webcam
Sep 03, 2012 | Acer Aspire 5500 5570-2609 Laptop
May 05, 2011 | Logitech QuickCam Connect Webcam
Mar 09, 2010 | Logitech Webcam
Dec 14, 2009 | Logitech QuickCam Connect Webcam
Oct 07, 2009 | Logitech Webcam
Jul 11, 2009 | Logitech QuickCam for Notebooks Pro...
Jun 07, 2009 | Logitech QuickCam Communicate STX Webcam
Jan 10, 2009 | Logitech Quickcam Chat Webcam
1,941 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: