Question about HP M2727NF Laserjet Printer

1 Answer

My M2727nf does not always power up. Sometimes the display lights will work too.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 223 Answers

This is due to a formatter failure.

Try an nvram
Try doing a hard or reset or nvram:
1. Turn the printer off
2. Hold down the right arrow and the cancel button
3. Reboot the printer while holding the buttons and hold until permanent storage is displayed. Let go of the buttons and wait for the ready message on the display.

if this does not work contact hp, if within 2 years from the purchase date ask for a case number to have the printer serviced under a service note.

Al
Eliteprintersolutions@gmail.com

Posted on Jul 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Control panel not working


The panel menu attaches to the DC Control Board. I would remove the panel and reseat the connection.

Aug 13, 2017 | HP Laserjet M2727nf Multifunction Printer

1 Answer

I have HP laserjet M2727nf mulit-printer, when I turn it ON its light up but when you press any keys nothing happens. Their is a display read Hewlett Packard but the printer in not working. Pressing any...


Your unit is displaying a common formatter failure. The good news is this:

Any HP M2727 manufactured before January 1, 2010 is covered by a service advisory that will get the printer repaired at no charge. You need to contact HP and get a case number or contact an authorized HP service partner. Be insistent, I have seen some service partners who have no idea that this service advisory exists. You can check the date of manufacture by looking at the serial number sticker on the back of the unit.

Jan 17, 2011 | HP Laserjet M2727nf Multifunction Printer

1 Answer

No display on hp m2727nf


you may require a new display panel -- if the unit is under warranty, call HP , i aM NOT CERTAIN WHAT COUNTRY OR STATE YOU ARE IN, BUT I KNOW hp IS ALL OVER THE WORLD

IF YOU NEED FURTHER INFORMATION, LET ME KNOW

Oct 15, 2010 | HP M2727NF Laserjet Printer

3 Answers

HP m2727nf scanner error 5


Hi Anataloi,

This is due to a hardware failure, the scanner assembly and the formatter board will need to be replaced.

Try doing a hard or reset or nvram:
1. Turn the printer off
2. Hold down the right arrow and the cancel button
3. Reboot the printer while holding the buttons and hold until permanent storage is displayed. Let go of the buttons and wait for the ready message on the display.

if this does not work contact hp 1800-334-5144 , if within 2 years from the purchase date ask for a case number to have the printer serviced under a service note.

Al
Eliteprintersolutions@gmail.com

Jun 25, 2010 | HP Laserjet M2727nf Multifunction Printer

2 Answers

Hp laserjet M2727nf scanner error 52


First, power the printer off, wait for about 30secs and power on. If problem persist replace the scanner.

Feb 23, 2010 | HP Laserjet M2727nf Multifunction Printer

1 Answer

HP Laserjet M2727nf locks up /nothing works. Turn off and no, works for a few menines. Then smae above happens. No code


This is due to a formatter failure.

Try an nvram
Try doing a hard or reset or nvram:
1. Turn the printer off
2. Hold down the right arrow and the cancel button
3. Reboot the printer while holding the buttons and hold until permanent storage is displayed. Let go of the buttons and wait for the ready message on the display.

if this does not work contact hp, if within 2 years from the purchase date ask for a case number to have the printer serviced under a service note.

Al
Eliteprintersolutions@gmail.com

Nov 10, 2009 | HP M2727NF Laserjet Printer

1 Answer

My HP m2727nf randomly shutsdown and initializes when ever it feels. powering off and then on sometimes solve the problem but only for a short time.


There is a power failure with the formatter board
try a nvram
Try doing a hard or reset or nvram:
1. Turn the printer off
2. Hold down the right arrow and the cancel button
3. Reboot the printer while holding the buttons and hold until permanent storage is displayed. Let go of the buttons and wait for the ready message on the display.

if this does not work the printer requires service.

Al
Eliteprintersolutions@gmail.com

Oct 14, 2009 | HP M2727NF Laserjet Printer

1 Answer

M2727 MFP no lights on the display


probably a cable is loose or not connected for display. printer could be faulty or you mught fix easily.

Aug 20, 2009 | HP M2727NF Laserjet Printer

1 Answer

HP M2727nf will not power up.


This is due to a formatter failure.

Try an nvram
Try doing a hard or reset or nvram:
1. Turn the printer off
2. Hold down the right arrow and the cancel button
3. Reboot the printer while holding the buttons and hold until permanent storage is displayed. Let go of the buttons and wait for the ready message on the display.

if this does not work contact hp, if within 2 years from the purchase date ask for a case number to have the printer serviced under a service note.

Al
Eliteprintersolutions@gmail.com

Mar 26, 2009 | HP M2727NF Laserjet Printer

3 Answers

HP laserjet m2727nf will not start up


I had this problem. You need to do a cold reset. To do this turn the machine off. Hold down the 6 and the # on the fax pad. Keep holding these keys down and turn machine on. After about a half a minute let the buttons go. It should do a reset. It may take up to 25 minutes to do this however my took less than one minute

Jan 12, 2009 | HP Laserjet M2727nf Multifunction Printer

Not finding what you are looking for?
HP M2727NF Laserjet Printer Logo

490 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Ben Johnson

Level 3 Expert

685 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...