- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If your hk-e330k tray doesn't open shows looked,Switch on the DVD and press & hold reject button for 5 seconds it will show you UNLOCK then you can that enjoying Home Entertainment System...Thanks for viewing!
Most DVD players are region-locked, meaning they will only play disks encoded in the location they are from, or disks without region-specific encoding. For example, if I bought a DVD player in Europe and tried to play a disc from the United States, it would not play. Unfortunately, in order to get past the "area limitations" you will either have to buy a DVD encoded in the same format as your DVD player, or set the player to a different region code (which often will lock the player after a certain number of times).
The drive belt that locks the disk in place is worn out. The belt slips and the plastic pinion gear fails to move the rack gear. This is necessary to slide the cam into place that raises the disk to the centering ring. When it is raised, to micro switches are made that tells the system the disk is loaded properly at which point the lazer reader will advance to detect the disk.
Verify that the tray is empty/no disc in the player;
Shut down/off with the front panel On/Off button and not the standby;
Press and hold the Open/Close, Play and Skip Reverse (I<<) buttons;
Maintain pressing on the above buttons and Power-ON the player with the On/Off button, (again while still holding the above buttons till the "Denon 2910" disappears from the display);
pls wait till LOADING completes and the front panel would display 0:00:00;
Using the remote control, enter 7, 3, 1, 9, 4, 6, 2, & 8;
The Denon 2910 will go into standby mode. Soon as it is on standby, pls press the Standby button on the front panel;
Pls verify region free update by pressing the Stop and Skip Forward (>>I) buttons on the front panel. The display would show “Region_Ax” The x would be the former region number that the Denon 2910 is locked into;
Should it not work ouot as expected, pls redo all the above steps.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information. Good luck and kind regards. Thank you for using FixYa.
With the machine turned off (not off at the mains mind you) press and hold the stop button and then while still holding the stop button, press the eject button. Turn it back on and hey presto! This method will unlock it when its locked and vice versa. p.s its in the manual