Question about Dell 926 All-In-One InkJet Printer

1 Answer

How to uninstal the printer driver .My p rinter is not comunicating with the computer and I was told to uninstal and then instal the driver and I have no idea how to do that .I dont have the driver either.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 51 Answers

For you to uninstall the printer driver.

if you're using windows xp

click on start, click on control panel, open add or remove programs, then look for your dell printer. then select remove. after uninstalling the printer remove the usb cable then restart the computer.

if you're using windows vista

click on start, on start search type programs and features, then press enter. then look for your dell printer, click no it, then click uninstall.
after uninstalling the printer driver remove the usb cable then restart the computer.

for you to have the driver for the printer you can go to support.dell.com
enter the service tag of your printer, then select the windows your computer is using, if it's xp or vista.
then download the driver. NOTE save it first. then after downloading the printer driver, run the file that you download.
follow the onscreen instructions. connect the usb cable when you're asked to connect it. and you're good to go.

have a great day :)

Posted on Oct 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a x2470 printer and my computer has windows 2007 and it seems there is no comunication between the computer and printer. I've done all the steps from troubleshooting to fix the problem.


Did you:
1) Verify that there is a Win 7 driver for this printer on the www.lexmark.com site.

2) If there is a driver, you must download the driver.

3) Remove the old driver.

4) Install the new driver.

It is imperative that the old driver is removed prior to the installation of the new driver.

Don

Feb 27, 2010 | Lexmark X2470 All-In-One InkJet Printer

2 Answers

The printer cannot communicate with the computer


your driver is corrupt. Delete driver (not driver icon but driver software) reboot computer then reinstall driver.

Oct 04, 2009 | Office Equipment & Supplies

1 Answer

Green light blinks and printer does not comunicate with computer


Your Printer Driver was problem. You get printer driver in this website (http://www.printcountry.com/drivers/LEXMARK_X1195_DRIVER_DOWNLOAD.htm)
and then installed....... try again

Jul 02, 2009 | Lexmark X1195 All-In-One Printer

1 Answer

Hp 6210 Printer - Connected to pc, but need to change cartridge


Yep, you need to download and install driver software from here first.

Select software and drivers

Start installation with rinter USB unplugged, the software will tell you when to plug in the printer.

Jan 13, 2009 | Office Equipment & Supplies

1 Answer

2710 all in one printer


I have the same printer; when installing it asks if I have a PC or Mac? Of course I have PC so I click PC. Another area you can check is the printer driver itself. Make sure the PC driver for the printer was installed. Then re-boot p-rinter, computer and all. Hope this helps.

Jul 29, 2008 | HP Photosmart 2710 All-In-One InkJet...

2 Answers

Printer wont work


I need more information: Type of pc operating system etc type of printer etc If using ip address or usb or parrelle conection etc Steveo

Sep 11, 2007 | Office Equipment & Supplies

2 Answers

No comunication betwen computer and printer


Of course the first this people are going to say is the obvious. Have you checked the connections on both ends? Have you tried a different cable? Have you powered off both the PC and the printer?

Mar 29, 2007 | Lexmark X8350 All-In-One InkJet Printer

4 Answers

Failure to comunicate with printer


Best to start from beginning, assuming your usb cable is ok. Remove printer from usb port,then uninstal printer driver. Re install printer driver and when prompted re connect printer(Use a different USB port, if have a spare one). Make sure windows finds new hardware, then identifies your printer(popup on right side of task bar), them watch for it telling you 'Your hardware is installed and ready to use'. Go to your printer folder in control panel and look on printers properties to see if it's on line. Come back if this does not cure it.

Oct 30, 2006 | Lexmark P4350 All-In-One InkJet Printer

Not finding what you are looking for?
Dell 926 All-In-One InkJet Printer Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2237 Answers

The Knight
The Knight

Level 3 Expert

74383 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Dell Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...