Operating procedure for Bauknecht Dishwasher GS835S

Get your hose here. https://www.apexhose.com/zero-g-pro//EASY FIX DISHWATER THATS WONT DRAIN .VISIT ABOVE LINK..

Need a new timer.

Please check on the link below:

http://www.bauknecht.co.uk/

Set the machine to the end of the drying cycle, when it has finished, try pouring boiling water into the machine about a kettle full there is a sump level control beneath the removable filter (where all the **** gathers) if this has fat deposits on it this type of problem can occur.

F7 error indicates a fault with the water flow meter .

Check the sump filter at the bottom of the dishwasher, then close the door and turn on the power. then hold the start button with the + and - buttons under the LCD display, until the drain pump starts. This should then reset the dishwasher.

Hope this helps .

have only worked on them a few times but no problem to use. literally select program, close door and start. you won't break anything by trying it out.
put detergent in the dispensor and rinse aid in the rinseaidv despensor. if in a harrd water area, add dishwasher salt to the softener

I used to work for Bauknecht years ago.
I dont remember that machine, but it could be an indication that your salt dispencer needs refilling.

The F7 means that the drain filter is blocked or your water pressure is low. Check and clean filters. Good luck !

I have this problem frequetly - it's an easy one to fix! Just press the programme button which changes the programme setting you want (on my built-in GSX4756 it's the last button on the right) and keep it pressed in until the beeping stops. Then start it again (will probably be on the rinse programme if it's like mine).