Question about Acer Aspire 3000 Notebook

2 Answers

Computer going crazy

Hey...my computer just "freaks out" occasionaly sometimes like when im using it. Like i'll be typing somthing and the little 'typing line' would just jump back where the crusor is sitting and i would start typing at that point. And then sometimes it like almost freezes and then like every page that i had opened in the last 5 mins would start popping back up and closing and then screen would start flashing...and the crusor would start flashing and i would eventualy have to 'ctrl,alt,del' it and restart the computer to fix it. And I would lose everything that I was working on at that moment. Its really annoying. I called the customer support line and they sent me some 'recovery disks' to run on it, but im kinda skeptical about doing that because then i'll lose EVERYTHING on it, and the computer will go back to its orginal configuration like it was when it came from the manufacturer. Is there any other option to fix this problem or is this the only option i have?? Please advise..
Thanks.

Posted by on

Ad

2 Answers

K..thanks..

Posted on Dec 16, 2007

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 362 Answers

Actually most recover disks give options so that it can fix problems like install drivers without wiping the drive and starting over you just have to get the command codes for this from the manufacturer. especially if its windows by microsoft.

Posted on Dec 16, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to open big fish games and get the message DRMactivator Application has stopped working - will not let me open any of the games. Have tried the fixing by going into settings etc and changing the...


If you are receiving the DRM activator error message do the following to correct the issue.
1 - Left click on Start
2.- Right click on Computer
3 - Left click on Properties 4 - Left click on Advanced System Settings
5 - Under Performance click on Settings
6 - Left click on Data Performance Settings
7 - Click on TURN ON DEP FOR ESSENTIAL WINDOWS PROGRAMS AND SETTINGS ONLY.
8 - Click on Apply and then OK.

UAC: (User Account Control)
Open up Control Panel, and type in user account into the search box. You'll see the link for "Turn User Account Control (UAC) on or off". Click it. Uncheck the box, and reboot your computer. hope this helps but if it still doesn't work just text me back and we'll try somthing else:)

Aug 07, 2011 | Computers & Internet

2 Answers

One by one my gauges(rpm,gas,speedometer,oil) stopped working. Is there a sensor that needs replaced? a fuse? dash? Help?


please keep me posted as well, ALL my gauges are doing the same. First the gas, filled it one day and it fell all the way and light turned on, then my themostat, freaked me out, thought i was overheating,...NO just the guage, NOW my spedometer is stuck on 120, and my RPM's are acting crazy. i have read tons with this same problem, WHY WONT the manufacturer DO SOMTHING??

Aug 25, 2010 | 2004 Isuzu Ascender

2 Answers

I could not send one message to all my friends in yahoo messenger,, could you help me please...?


Hey welcome to fixya. I hope u 'll be fine.
  • Open your yahoo mail account and go in Contacts there
  • create a contact list there and add all the contactsin this contact list u want to send messages at a time.
  • Now go in create new mail and type your message and in sender's adress just put this contact list and send the mail
  • The mail 'll send to all the contacts which 'll be in this contact list
If u think that it was helpful Then Please do rate me
THANKS & Keep using Fixya

Feb 12, 2010 | Yahoo Messenger

1 Answer

Something wrong with SLI


If you are using two SLI card they need to be bridged together so that the GPUs work together to process the load. Also, in your BIOS you must make sure you configure it to use SLI. Furthermore, the most important thing is that if you are using SLI cards that you update the graphics softeware and set the cards to be bridged. SLI is flaky sometimes, just have to iron out the behavior and tweak it over time and make sure that everyting is clocked right.

May 27, 2009 | ASUS M2N-E SLI (M2N-E SLI GREEN)...

1 Answer

It won't let me choose what to do, It goes to random things.


seems like your sansa gone crazy.. maby you dropped it somewhere or spilled something over it
return it to the store you did buy it and ask for help

May 25, 2009 | SanDisk Sansa Connect MP3 Player

2 Answers

Jumping cursor


This is a really common problem thats not actually a problem.
Go to trackpad settings and make sure tap to click is off.
Most laptops allow you to tap the track pad to act as a mouse button, try it go to an icon tap the trackpad youll see that the icon highlights as if you are actually left clicking.
When your typing the trackpad senses your arm or wrist occasionaly and thinks your tapping the mouse, thus moving the cursor.
So go into trackpad settings and turn off tap to click.

Jan 19, 2009 | Acer Aspire 1690 Notebook

1 Answer

HELP ME!!!!!!!!!!! Before my Son Freaks


hi, i will try and help.
Turn on the computer, as soon as you have pressed the on button press and hold F8. A list will come up. Choose safe mode. Then when it boots, in the username type administrator and the password will usually be blank, if this does not work try "admin". If there is a log on field showing then choose log on to this computer and do not choose dial up. Then press ok. The computer should log on. When it asks you if you want to continue working in safemode click yes. Then click start. Click control panel. Click user accounts. Click the password protected user account. Choose remove password. Then restart the computer and it should work normally.

Tell me if you need more help or if somthing goes wrong then you can take a picture of it and send it to jhobden600@gmail.com .

Thanks

Jan 12, 2009 | Microsoft Windows XP Professional

1 Answer

Freaking out


will i suggest to reformat your computer and installed the windows again to fix that problem...i think your computer will attack the virus that will create damage from the registry...if you always restart your computer the tendency is will create damage of the hard disk..

Dec 16, 2007 | Acer Aspire 3000 Notebook

Not finding what you are looking for?
Acer Aspire 3000 Notebook Logo

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

645 Answers

Alun Cox

Level 3 Expert

2678 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...