Question about Symbol (LS3070-I100US) Handheld

Open Question

PDT6846 won't turn on

Handheld beeped to notify low battery, switched battery and the machine will not turn back on. Tried warm boot and cold boot procedures (46 key unit). Do not have all the programming tools as this was configured for our store by a vendor.

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: Diference between Cold boot and warm boot

A warm boot restarts the mobile computer by closing all running programs. All data that is not saved is lost.

A cold boot also restarts the mobile computer, but erases all stored records and entries from RAM. In addition it returns formats,
preferences, and other settings to the factory default settings.


Posted on Aug 07, 2008

Ad
  • 47 Answers

SOURCE: Frozen PDT6846

Probably not -- looks like corrupt firmware -- it'll have to go to a Symbol/Motorola Dealer for repair.

Posted on Nov 04, 2009

SOURCE: Hello, my handheld symbol pdt6846 need load SLOADI

Hello,

The PDT6840 has 3 files loaded into it at any one time LWP.HEX, UDP.HEX and an application. SLOADI comes up on the screen during boot. You may require reloading of the software to enable this function again.

If you need any more help then please do not hesitate to contact us:-

http://www.biastechnology.com/

or TEL 01202 620955

Posted on Dec 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a samsung STM330 tablet it has charged but won`t turn on.


  • Defective battery
  • Defective charger
  • Defective power switch

May 13, 2018 | Samsung Computers & Internet

1 Answer

Hoe to reboot pdt6840 scan gun


Warm Boot:

- Press the "PWR" button to turn the unit off.

- Press the "4" and "5" keys at the same time.

- While still pressing the "4" and "5" keys press and release the "PWR' button again.

- Release the "4" and "5" button.

- The PDT6846 should perform a warm reboot.

Cold Boot:

- Press the "PWR" button to turn the unit off.

- Press the "B", "D" and "A" keys at the same time.

- While still pressing the "B", "D" and "A" keys press and release the "PWR' button again.

- Release the "B", "D" and "A" button.

- The PDT6846 should perform a cold boot.

May 03, 2012 | Symbol PDT6842-NIS632EU Portable Data...

1 Answer

My computer won't boot up and the orange light just stays on. The moniter is working, the fans in the power supply is working. I was fine yestyerday. I put in hibernate and tried to cut back on today...


Remove the RAM and install it again and restart.....it will work if still not work then change remove RAM again and start your machine..it will give beep sound...if it will not give beep sound then understand your machine's mother board is faulty......

Sep 09, 2011 | E-Machines eMachines Desktop PC

1 Answer

My MC55 will not respond to a cold or warm boot. I have fully charged the battery. The screen will not respond when I tap it. The screen is white withe the Motorola logo and MC55 Series. Is there...


My MC55 will not respond to a cold or warm boot. I have fully charged the battery. The screen will not respond when I tap it. The screen is white withe the Motorola logo and MC55 Series. Is there anyway to get this back to working again with out sending it to a tech person?
Can you help me?

Jun 05, 2011 | Motorola MC55 Handheld Mobile Computer PN...

1 Answer

Amana Model LWABOAW Manufacturer # PLWABOAW Age: Approximately 12 years. Ran fine up to now. This morning the machine would not run using Cold/Cold setting. If the Warm/Warm, Warm/Cold or Hot/Cold...


Hi

I believe the issue is with the water inlet valve assembly going bad and should be replaced, this unit has two valve one for cold and another for hot. You can test the valve first if that is fine then check the pressure switch which is part#4 in this diagram. Hope this helps...please post back for further assistance.

Daniel

Jan 19, 2011 | Amana Washing Machines

2 Answers

Hello, i have a symbol 8800 that will not boot at all. I have tried replacing batteries, cold booting etc... all of which have not worked. Is it busted?


There is a part on the battery cover that activates a switch on the main pcb.
This switch is on the opposite side of the "reset" switch on the back of the machine, near the bottom.
If this switch is not being activated, the machine will not turn on.

Try squeezing the bottom the machine, thereby pressing the battery into the machine harder. Then try turning it on.

Jan 19, 2011 | Symbol PPT 8800 Portable Terminal

1 Answer

Could you tell me what has to be done when the only item appearing on the screen is MC70?


Resetting the EDA

There are two reset functions, warm boot and cold boot. A warm boot restarts the EDA by closing all running
programs. A cold boot also restarts the EDA, and also resets the clock. Data saved in flash memory or a memory card is not lost.
Perform a warm boot first. If the EDA still does not respond, perform a cold boot.

Performing a Warm Boot - Soft reset

Hold down the Power button for approximately five seconds. As soon as the EDA starts to boot release the Power button.

Performing a Cold Boot - Hard reset

To perform a cold boot simultaneously press the Power button and the 1 and 9 keys.



symbol_mc70_hard_reset_soft_reset.jpg

Dec 03, 2010 | Zebra Symbol MC70 HandHeld Mobile Computer...

1 Answer

Mc70 handheld scanner won't boot up - no light, nothing.


Have you tried any of the steps below?
  • Warm Boot: Press and hold the Power Button for 5 seconds.
  • Cold Boot: Press the 1, 9 and Power (W, C and Power) buttons at the same time.
  • Clean Boot: Press the 1, 9, Power and Trigger (W, C, Power and Trigger) buttons at the same time.

Aug 31, 2010 | Symbol MC70

1 Answer

Frozen PDT6846


Probably not -- looks like corrupt firmware -- it'll have to go to a Symbol/Motorola Dealer for repair.

Oct 27, 2009 | Symbol PDT 6800 Portable Terminal

4 Answers

I left my Compaq 2510p on standby with the battery low a couple of hours ago. I have now connected it to the mains charger and tried to turn the machine back on, but it won't turn on...any ideas what I...


Might be stuck in hibernation. Pull the battery and ac power for about 1 hour. Replace and try to boot. If fails, pull the battery and try to boot just off ac power.

Dec 01, 2008 | HP Computers & Internet

Not finding what you are looking for?
Symbol (LS3070-I100US) Handheld Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Symbol Computers & Internet Experts

Michael

Level 2 Expert

51 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Oloyede Monsuru

Level 3 Expert

1417 Answers

Are you a Symbol Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...