Question about Jenn-Air JFC2087HRP Side by Side Refrigerator
CAN YOU TELL ME WHERE IS THE STARTED RELAY ON THE REFRIGERATOR ON A SAMSUNG RS2545SH, AND HOW I CAN REPLACE IT.
Behind the refrigerator on the compressor you would find the relay and overload replace them as 1 unit
Posted on Jan 01, 2008
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Mar 15, 2012 | Kenmore Side by Side Refrigerator
Sep 05, 2011 | Amana Refrigerators
Mar 18, 2011 | Amana ABB2227DE Bottom Freezer...
Refrigerator making clicking noise compressor not running.
The clicking could be the start relay.If the start relay is bad, the compressor will not start and you will hear a clicking noise in 2-5 minute intervals. The clicking noise is the overload cutting the compressor off when it overheats from trying to start with a bad start relay. To find out if this is bad first unplug the refrigerator. Remove the lower cover from your refrigerator. Then take the cover off that is on the side of the compressor,you will see wires going to this. Now you should be able to see the start relay plugged on to the side of the compressor and unplug it. Now the best way to tell if it's bad is to shake it. If it rattles, it's bad and needs to be replaced. If not, most of the time it's ok. But rather than saying the compressors bad, you might want to replace it anyways because it does not cost much. A quick check on the compressor is to remove the start relay. You will see 3 pins connect a multi meter set for continuity. You should have continuity between any of the 3 pins. If you do not the compressor is bad. Also check from each pin to a good ground on the cabinet. There should be no continuity if there is the compressor is bad. If you replace it and it doesn't work then the compressor is bad and you'll need to call a repairman. (Note that compressors are very costly and are normally not worth fixing).You can enter your model # at Refrigerator clicking for diagrams and illustrations or to purchase a start relay. A 3 in 1 start relay will also work fine.
Jan 29, 2011 | Amana Freezers
Sep 16, 2010 | Maytag MFC2061HES Stainless Steel French...
Jul 19, 2010 | Kenmore 20.6 cu. ft. Top Freezer...
Apr 09, 2010 | GE GDS20SBS Stainless Steel Bottom Freezer...
Jan 30, 2009 | Frigidaire FRS26H5AS Side by Side...
Jan 27, 2008 | Whirlpool 21.7 cu. ft. Side-by-Side...
102 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: