Question about Sony Cyber-Shot DSC-T1 Digital Camera
There may be the issue with the CCD (image sensor device) of the Camera.
Refer this article to confirm this:
Check whether the LCD screen of the Camera looks similar as given on the page.
If yes, click on the "Yes" button at the end of the page to create an online Repair Request for sending the Camera to the Sony Factory Service Center.
Posted on Sep 24, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jan 07, 2013 | Panasonic Lumix DMC ZS19K 141 Megapixel...
Sep 06, 2008 | Hitachi Televison & Video
Jun 17, 2011 | Tatung Computers & Internet
Dec 04, 2010 | Televison & Video
Aug 08, 2009 | Sony KDF-42WE655 Television
Dec 30, 2008 | RCA D61W20 61" Rear Projection Television
Jul 21, 2008 | Lexmark X83 All-In-One InkJet Printer
Jun 02, 2008 | Lexmark X83 All-In-One InkJet Printer
You have a problem with the three factors, and they are screen voltage, focus voltage, and control (focus 2) voltage. Basically these voltages have to be adjusted since the components in this section have aged some. These controls are usually located in the television on the IHVT (Integrated High Voltage Transformer) or as it is also called the flyback transformer. these controls must be adjusted together, along with the color controls. Here is how the adjustment is done (You will need a schematic diagram, a DC volt meter, and a color bar generator to do these measurments):
1) turn color and tint fully counter clockwise until you have a black and white picture.
2) connect the color bar generator to the TV (ch 3) and turn it on, you should see bars in various shades of gray
3) adjust as best as possible the color and tint controls to obtain the color bars on the screen Red Green Blue.
4) measure the voltages on the focus, screen and control grids of the CRT and match them to the schematic digram measurements.
5) adjust the focus screen and control grids to match the ones on the schematic diagram
6) once this is done then you adjust the color controls once again to obtain the red green and blue bars on the TV screen.
This should help if the CRT (picture tube) electron guns are still good and if the flyback transformer voltage supply is working.
However if you do not have a background in electronics please take the TV to a shop for repairs.
I hope this helps,
Oct 16, 2007 | Sony KV-20M20 20" TV
Sep 04, 2007 | Sony Cyber-Shot DSC-T1 Digital Camera
98 people viewed this question
Usually answered in minutes!