Hi i have hp pavilion dv2010us my problem is my laptop is getting started normally but my desktop screen is blank i donno wat to do so please help me out of this problem

If your laptop is out of warranty, then you can fix the problem by resoldering DC-IN ... Power LED and battery charge LED start flickering when you wiggle the power .... HP Pavilion dv7-4080us 17.3-inch Desktop Replacement Laptop PC ... High-Capacity Battery For Hp Pavilion Zd8000 Series Laptops ...
www.articlesbase.com › Computers › Laptops

hello,

if the case is that whenever you turn on the computer it presents to you options on how to turn on your computer, safe mode, safe mode with command prompt, start up windows normally and other options of such.

if you select any and it goes blank, and comes up with a screen showing windows driver error occurred.

try to format the system and reinstall the operating system again.

get back to me to assist you better if that doesnt work

Try safemode boot than restart again. Sounds like it's hanging up loading drivers.

Can you hear the hard drive spinning and does the computer appears to be running but you get a blank screen? If you look at the LCD screen at an acute angle and you see a dim image. then you have a backlight problem. To determine if you have a video card problem or a lcd screen problem, Connect an external monitor to your laptop and power the monitor up first and then the laptop, if you see the normal Windows images then the video card and laptop is OK and the problem is definitely the backlight.
Get back to me with the results of these tests and any error messages etc. so I can advise you.

usko land me dal kar chuus fhir randi baja sale banh ke loade,chut age se chut chatio

hi, i have had the privilege of work on these particular series of HP Laptops. This may sound daft, but have you tried the brightness keys? If so you have a fault with the backlight which is caused by 1) a fault on the Mainboard 2) the inverter has blown (a small circuit board the regulates the voltage from main board to the lcd screen) 3) The backlight on the lcd screen has blown. You will need to determine where the fault lies before paying out large sums. You may want to get a diagnostic done by a Local laptop company. Hope this helps.

Hi!
Can you go in safe mode? The screen it is working?

In case you don't know how to go in safe mode:

Turn on the computer and after the boot screen press the F8 key.
Windows will ask which mode you like to go:

First try safe mode.

You can also try:
Last know good configuration
VGA mode.

Let me know

have you got a bootable cd or recovery cd , boot from it and do a fresh installation, i think your windows has got corrupt

hi
try adjust brightness and contrast if doesn`t help try connect to external monitor.
if you require more help let me know ;

regards

Have you tried pressing F8 on boot-up and log into safe mode under administrator, no password, and right click on any empty space on the desktop, left click on properties, left click on settings, select a lower resolution,( e.g. 1024X768 ) select apply, select ok, reboot, log in as normal