Question about Sewing Machines

2 Answers

Hi I would like to know what the price of a foot control for Janome 534D. My machine surges and it appears to have a broken pin in the side of the foot,or maybe you can suggest something else that is causing this problem. Thanks Chris Sarne

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 136 Answers
  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 244 Answers

You're looking at approx. 25-30$ to replace it. if i had it, i could probably fix it in 15-20 minutes with a pop-rivet and some wd40. i assume you could do the same, if knew how and had a pop-riveter and the proper sized rivets. it's a mechanical problem, not electrical- i assume from your description of the problem.
it's a White machine-relatively new? still under warranty? otherwise dependable? expensive?
is it worth spending 25-30$ on? if you're old friends- then spend it! check thrift shops, etc. (if it's older machine). my wife loves her old standbys. i'm her fixit man.
good luck!

Posted on Sep 24, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Upper and lower knife 534d my lock where can I purchase them

Just a guess that it's a Janome. You can buy the lower knife here:

Janome 534D Parts

However, generally the other knife needs to be replaced by an experienced professional as it needs the correct adjustments.

Jul 20, 2017 | Sewing Machines

1 Answer

Need foot pedal and lead for janome xl 11

Give Ebay a try. Here is a good start:

Feb 27, 2015 | Janome Sewing Machines

1 Answer

Looking to download a janome MYLOCK 534D manual can anyone piont me in the right direction please

The Janome site do partial manuals for some machines.
They have manuals for the MyLock 644D:
And for the MyLock 634D:
They should be similar enough to your machine to help withtthreading etc.
Hope this helps!

Nov 23, 2010 | Janome MyLock 644D

1 Answer

I have a janome 1 step sewing machine. last time I used it, I had stopped using it for only a few moments whilst I pinned the material so I could carry on stitching. It was still plugged in swhen suddenly...

I would call your dealer and get a new power plug put in. What i see here is a possible fire hazard. I do not know how old your machine is but I hope it is still under warrenty. By the way, The new Janome 7700 Horizon is at a bargain price right now. I am a sales rep for a dealer and we guarentee the best prices.

Sep 13, 2010 | Janome Memory Craft 9000 Computerized...

2 Answers

I need a user guide for a janome finesse overlocker model 534D. Free download if possible. has heaps of manuals - I purchase a Janome 534D Mylock overlocker from here for $11 Aus. The site is American but you can pay with paypal. Immediate download on payment. Definitely worth it.

Apr 01, 2009 | Janome Sewing Machines

2 Answers

Foot control ''dead'

This uses foot control # 031570312 which also fits New Home Models 2122,3123,5001,5500,6000,7000,and 7500. It can be ordered from Janome dealers and some Elna Machines use the same cord and control. It will cost $100 more or less.
You do have a good machine but you need to make sure it is really the foot control which is bad and not a circuit board.

Nov 20, 2008 | Janome Memory Craft 9000 Computerized...

1 Answer

Sewing machine foot

Hi Debbie,

Your Ergo was made by Janome - so you have lots of options for accessories.

The foot model you list is the foot control for the machine - is this what you are looking for?

Our first recommendation is to support your local stores whenever possible - and your local Janome dealer may have the foot control and lots of other accessories for your machine in stock.

If you can't find what you need locally, you can try Sewing Machines Plus in San Marcos, CA appears to. I did find another reference to it on yet another website, but it states they are out of stock and taking orders for future stock.

While we don't have the foot control for your machine, we do have a bunch of Janome presser feet & embroidery cards/design on our site that may work for you as well.

Best of luck in finding your foot control.
Kim & Linnette

Jul 16, 2008 | Sewing Machines

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1129 Answers

Chris Wetmore

Level 2 Expert

185 Answers


Level 3 Expert

76630 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides