Question about D-Link AirPlus DI-524 Wireless Router

2 Answers

Dont know username and password to access the modem

I found used D-Link DI-524 in my office, the look quite well,,, I want to verify weather it can be use or not.I m sure that modem already configured.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 68 Answers

Mostly correct. If you found this router, a different id/password may have been assigned. In that case, use a paper clip and press the reset button on the back for ten seconds. Then follow the instructions above. This question was on a D-Link router, so the 192.168.0.1 address should be the correct one with admin and blank as the id/password.

Posted on Sep 24, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,281 Answers

First connect your router to computer with ethernet cable.
then you can access it with following link.
http://192.168.1.1
or
http://192.168.0.1

type user name as "admin" and password as "admin" or blank or "password"
Then you can see configuration page.
Let me know if you need more assistanse.
Thanks.

Posted on Sep 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wireless is nonexistant


You need to bridge mode your modem. And when set it to bridge mode already. Connect the dlink router. Access the gui of the router. Enter there your username and password. Powercycle modem, router and computer. Check connections. I f this didnt work, set again your modem to default, connect your router. Configure your router with username and password. Powercycle again. Check if it is working.

Jul 16, 2010 | D-Link DI-524 4 Port Wireless-G Router -...

1 Answer

Can not open wizard


You can reset your router.

To reset your router, use the following steps (from http://technicallyeasy.net/2008/02/how-to-reset-d-link-di-524-wireless/):

  1. Press the reset button [the tiny button on the back of your router, marked Reset] for 10 seconds. You can use a small object, such as a paper clip to hold down the button.
  2. Do not power off the unit while the router is being reset.
    The unit should now reboot, and once the WLAN light stops blinking the router should be reset.
  3. Open up your Web browser and enter 192.168.0.1 in the address bar.
  4. For the login, enter admin as the ID and leave the password blank.
The router has now been reset. Follow the steps in Securing D-Link DI-524 Wireless Router to secure your router.
admin username: admin

Default admin username: admin Default admin password: <blank>

Aug 16, 2009 | D-Link (DWL-2200AP) 802.11g/b Wireless...

1 Answer

D-Link DI-524 works with desktop, but laptop can't get signal


Try opening internet explorer and typing in http://192.168.0.1 in the address box
If this doesn't work try http://192.168.1.1

For the username and password put admin for username and leave the password blank

Now look for an option for the Wireless Settings and change the channel from usually channel 11 to channel 4 your laptop may now see it. Otherwise try another, channels available in the uk are 1-12, I think it's 1 to 11 in USA

Feb 28, 2009 | D-Link AirPlus DI-524 Wireless Router

1 Answer

D-Link DI 524 behind VNC access remotely - Need help....


Open a browser and type in htp://192.168.0.1 to access your router's web management interface. Enter the username and password (default is username admin and no password)
Go to the Advanced Tab and Virtual Server
Name=VNC
Private IP=IP Address of your Home notebook
Protocol Type=TCP
Private Port=5800
Public Port=5800
Set Schedule as you like
Enable the rule and click Apply.

To access you Home notebook from anywhere other than your house, go to http://10.0.57.46:5800

Next - remote management of the router.
The IP address that you enter on the remote management page is the IP address that is allowed to connect to the remote management. If the 194.145.183.83 is the IP address of your office, this should work. Be sure you apply a password or anyone going to http://10.0.57.46 will have access to you router, I also recommend changing the port from 80 to 8080 so that http://10.0.57.46:8080 has to be typed to access the remote management interface.

Jan 02, 2009 | D-Link AirPlus DI-524 Wireless Router

2 Answers

Secure dlink di 524 with wireless connection.


One of your neighbors may have changed it for you, but you have the hardware, just reset it, and get a LONG cable to it, as you only get problems trying to set the Router with the wireless connection.
After resetting to factory default,
Change admin password
Set wireless security:
Wikreless/Wireless MAC filter.
- here you allow witch MAC address is allowed to access your network.
you find your own MAC address by typing ipconfig /all in a cmd.
/Teis

Dont forget to vote if this is helpful

Nov 23, 2008 | D-Link AirPlus DI-524 Wireless Router

3 Answers

Dont know the password and user name


http://192.168.0.1

then type user name:admin
password is:admin or blank

then enable DHCP.then u can get ip automatically.

Nov 12, 2008 | D-Link AirPlus DI-524 Wireless Router

5 Answers

DI-524 problem please help


The default username for this router is "admin" without the quotes, and the password is blank (don't type anything.) If that doesn't work, it may have already been changed, in which case you can soft reset the settings to factory defaults by using the reset button on the back of the box.

Sep 24, 2008 | D-Link AirPlus DI-524 Wireless Router

2 Answers

Installing a DI-524 router


Hi askar,

I'm assuming if you've been given a username/password you've either got DSL (a PPPoE connection) or it's for your email address. If you don't have a disc for your new router, you can configure it through a wired connection to the router (using an ethernet cable). That's a bit of work but if you need to do it that way we can help. Otherwise run the CD that came with the router (again, you'll need a computer plugged into it) and the step-by-step should get you through it.

For starters, unplug the modem and then plug the cable running from the old router into the same port space in the new router (should say either WLAN or Uplink). Turn on the modem, wait 30 seconds, then power on the router. After that run the disc and you should be good.

If not, let me know!

Ben

Sep 06, 2008 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Logging onto the DI-524 Router


hello..

The default username for the DI-524 is admin and the password is blank.

Jul 02, 2008 | D-Link AirPlus DI-524 Wireless Router

2 Answers

Router cannot get IP with cisco 675 modem


Hi,

The issue may be due to the existence of two (2) DHCP servers; 1 in the Cisco 675 and the 2nd in the DLink DI-524. You need to disable the Cisco's DHCP server function and assign static IP add & config to the DLink WAN config. This way it will only be the DLink handing out IP adds to the network.

The workaround. Install your original configuration/setting without the DLink DI-524 - PC direct to the Cisco 675 (I am assuming through Ethernet ports). Verify that indeed you are connected to the Internet and can surf the net, check e-mails, etc. Check your Networking Connection Status. Log down your PC's IP Add, Subnet Mask, Default Gateway, DNS. For purposes of discussion, let's call this "N1".

After your Internet connection has been verified with your PC directly connected to the Cisco, remove the direct connection and connect the DLink DI-524 in between the Cisco router and your PC.

Log in to the DLink and modify WAN parameters using the "N1" configurations/settings.

It might be of help to disable any security (WEP WPA, MAC etc) at least while configuring.

Hope this be of help/idea. Pls post back how things turned out or should you need additional information.

Good luck and kind regards.

Feb 01, 2008 | Cisco 675 Router

Not finding what you are looking for?
D-Link AirPlus DI-524 Wireless Router Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18390 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...