Question about Lakewood Oil-Filled Electric Radiator Heater
A neighbor gave me a lakewood 7096 heater and when I turn it on the switches light but no heat. do I need to add oil? any ideas
Some of the newer models have a thermal fuse which may be blown. It doesn't look like a normal fuse at all. It is similar to a transistor in looks and should have continuity from one end to the other. It will be tied in to the incoming power cord inside the heater, and may be covered with rubber coating within the wire. It will look different when you notice it. Sometimes its too far down inside where the heat causes it to blow prematurely. The purpose is to cut the power to the unit in case it overheats. You can get one at radio shack for less than a couple of bucks. The older models don't normally have one, but I would suggest you put one in it if that's the case.
Posted on Jan 01, 2008
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Nov 29, 2014 | Lakewood Heating & Cooling
Jan 20, 2013 | Lakewood Heating & Cooling
Mar 30, 2011 | Lakewood Oil-Filled Electric Radiator...
Jan 17, 2011 | Lakewood Oil-Filled Electric Radiator...
Oct 04, 2010 | Lakewood Oil-Filled Electric Radiator...
Jan 19, 2010 | Lakewood Oil Filled Heaters 7096
Jan 18, 2009 | Lakewood Oil Filled Heaters 7096
Jan 07, 2009 | Lakewood Oil-Filled Electric Radiator...
594 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: