Question about Cub Cadet Street Sign- tractor lawn riding mower parts
Run time counter works and idiot light illuminates. Has a new battery (one week old). Good oil level. I think it is a interlock problem.Can also pull PTO knob and here it engage and disengate when push. Took voltage a starter solenoid when key turned to 'START'. the when this occurs there was only 6VDC at terminal.
Take the PTO switch apart and clean the contacts.
Glue the bottom cap back on and give it a try.
There are contacts inside that will cut all power to the starter from the ignition switch.
It worked for me.
Posted on Sep 27, 2009
It is very possible that your battery cables are corroded or too small - this is a common problem with MTD machines, they cut costs by using cables that are marginal at best. i suggest replacing the battery cables, then you know that you're getting full battery power to the starting system. then you can check other things if that doesn't solve it. first rotate the engine by hand, sometimes the starter gear gets stuck in the flywheel. check the solenoid, pull the white [or yellow] wire from the solenoid, run a jumper wire from that terminal to the big terminal with the battery cable attached to it, it should crank the engine. if it doesn't crank, replace the solenoid. sometimes, there's a relay in the wiring harness that fails, but rare
Posted on Sep 24, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
711 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: