Question about HP Color LaserJet 4600n Printer

4 Answers

I need to configure my hp4600n to work PROPERLY with my mac os 10.5 as well as my dell968w

Posted by on

  • 6 more comments 
  • romanfitz Sep 25, 2009

    Is there a work around to connect my mac os 10.5.x to my hp4600n? It prints from my mac, but it just prints the first page 50 times. I feel like I'm close, but need to make an adjustment somewhere.

  • romanfitz Sep 25, 2009

    Right now I am focusing on the HP 4600N to work with my Mac. I think I downloaded all the drivers that I found on the web and the best result I get is that it prints page 1, 50 times.

  • romanfitz Sep 25, 2009

    I;m sorry. I am trying to set up my HP4600n printer with my mac os 10.5.x. I have downloaded all the drivers I can find. When I send to print, it prints the first page 50 times,

  • romanfitz Sep 25, 2009

    I am trying to get my HP4600n printer to configure correctly with my mac os 10.5.x. I have downloaded all the drivers I can find, but it just prints the first page 50 times.

  • romanfitz Sep 25, 2009

    same result. page 1 50 times. what is the driver name once it is downloaded?

  • romanfitz Sep 28, 2009

    Thank you, but after I set it up exactly as it said through HP jetsocket and put the IP address in, it appeared to install correctly. However, It printer page one 50 times again. I feel like I'm so close.............what do you think?

  • romanfitz Sep 29, 2009

    I have triple checked all the settings and there is no indication why 50 pages would be printing. In fact, I remember seeing something online as to someone else having the same proble, but of course I can not find it now. I thought by putting in the IP address and setting it for jet socket would work. Obviously I'm missing something. And yes, I have had the same result when plugging in directly.????????

  • romanfitz Sep 29, 2009

    I really thought I was on the right path. I was able to upgrade the firmware.........no luck. Same result.

×

4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 360 Answers

In the hp software there's a place that says how many copies and you put 0. I think I remember seeing the same problem as you.

Posted on Sep 29, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,653 Answers

You can download the latest Mac Drivers and Documents and Setup Info from the following link

http://www.driversdown.com/drivers/3404.shtml

Posted on Sep 25, 2009

  • 1 more comment 
  • Karl Wright
    Karl Wright Sep 25, 2009

    Try downloading the 10.6 driver from HP Support at



    http://h20000.www2.hp.com/bizsupport/Tec...



    This should cure your problem

  • Karl Wright
    Karl Wright Sep 28, 2009

    Arwe you sure that there is no default to print 50 copies set on the printer or inthe application as there is nothing that should cause this in the printer logic. I have not come acorss this issue witha ny other Mac OS 10.5. or 10.6 users. The only other thing to do is reflash the printer firmware, again avilable from the link that I sent to you.

  • Karl Wright
    Karl Wright Sep 28, 2009

    Does this problem occur if you print directly to the printer instead of using the net coonection?

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • HP Master
  • 3,614 Answers

Hi,

May I know what exactly device that you have the problem, do you need a device driver for that??

Posted on Sep 25, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,689 Answers

You have 2 options:

1. it is either you install the MAC drivers of the printer to your Mac and the Windows drivers to your Dell and make it work both ways by unplugging or replugging the printer from one computer to another,

or

2. you can get a printserver and connect the printer to that device which will be connected to your network where the MAC and the Dell is connected. This way you can print on both machine without unplug and replugging of the printer.

below are some resources you need.

you can use this device to connect your computers in the network plus the printer.

http://www.apple.com/airportextreme/

extreme is a router, printerserver and a network attached storage in one.

hope this helps, if you need more info, please let me know

Posted on Sep 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a driver for the SMC2870W and Mac OS X?


This is a standard wireless ethernet bridge and does not need a special driver for MAC OS. It is a Plug n Play device and should self configure using TCP/IP . Here is the manual : http://www.manualslib.com/manual/154817/Smc-Networks-Smc2870w.html?page=20#manual. Your Mac should see the wireless signal. You could use Safari browser to configure if needed. Apparently the Configuration utility is for older windows systems up to XP. You may need some networking skills to do the configuration without it. Good luck.

Mar 07, 2015 | Office Equipment & Supplies

Tip

How can I get my Windows PC to see my printer(s) on my Mac OS X network?


I am sure this question has arisen more than once, as to just how to locate and use the network printer in your Mac OS X network,so you can print from your Windows PC. After all, the Macs you have in your network print with no problem, why not the PC?

But nothing seems to work, that you have tried. So what to do?

Well, the answer comes with a simple yet very effective technology implemented by Apple Inc., just to address this issue.

It is a zero configuration networking protocol known as Bonjour.

Bonjour formerly known as Rendevous, was implemented from the Zeroconf (Zero-configuration) service delivery protocol and first introduced by Apple in its software with the release of the Mac OS X 10.2 Jaguar system.

In lay terms, what "Zero Configuration Networking" means to you, is that you do not have to be computer geek or guru, to simply install or configure this software, because it was designed for the most part to automatically discover computers, devices, and services on local IP networks.

The "local IP network" being described here, is your own network, whether it is in your home, home office or anywhere you have a network setup.

What makes Bonjour so efficient, is that it can work with PCs in order to work with devices connected to Macs. To use it, all you need to do is install the software to your PC. Macs with Mac OS X versions from 10.2 to 10.6, of course, already have Bonjour as a built in feature.
----------------------------------------------------------------------------------------------------------
So how do I use Bonjour to discover printers on my Windows PC(s)?
----------------------------------------------------------------------------------------------------------

It really is a simple as 1 -2-3.


1.) Download Bonjour - You can simply search for it by name through
Google or your favorite web search engine, or
click the link below to install in on your PC.
Download and Install Bonjour for Windows


2.) Install Bonjour - Simple enough, install it once the download is
complete. In the example below, I use my Epson
NX415 printer as a network printer on a Mac OS X
network, that needs to be discovered by a Toshiba
Laptop with Windows Vista Sp2 also a part of that
network.

8799557.jpg


3.) Launch Bonjour to discover the printer(s) in your network -


a.) Introduction Screen:

You will be very satisfied when you see how little
effort you have to put into discovering the network
printer on your PC with the Bonjour Printer Wizard.

**Note: Keep in mind, the network printer must be properly
connected, turned on and functional, otherwise Bonjour
will not discover your networked printer with your PC.**

13fb4f9.jpg


b.) Printer Discovered:

Printer in Mac OS X network, if working and turned
on... Should be discovered by Bonjour right away..

5ac6d8f.jpg

c.) Printer Driver not needed:

A really nice feature with Bonjour:
You really don't need to have the print driver software for the
discovered printer. Bonjour will identify the printer, its
location on the Mac OS X network and will use a
Generic/Postscript identity due to a print driver for the
PC not being needed.

67ab0c7.jpg

d.) Summary of discovered network printer:

Final screen for the Bonjour Printer Wizard. Just click
the Finish button and that is all it should take.

ba4ab3b.jpg
moz-screenshot.png
Done!
Now open any document run a test print..
on and get to printing with the newly discovered
Mac OS X network printer on your PC.

Now, that you know, no more guessing, on how to find
that elusive Mac OS X network printer for your PC.

Happy Printing!

Regards,

Mactechtrainer




on Feb 04, 2010 | Office Equipment & Supplies

1 Answer

How to use telephone modem in mac ? Can you guide me through step by step to use telephone modem in macbook ?


Unfortunately dial-up modems are no longer made by Apple. However, there are still a number of dial-up modems available from third parties - Zoom and Belkin still make USB-based dialup modems, I believe, and Apple did at one point make a modem that may still be available through third-party retailers such as Amazon or Ebay.

Whichever you choose, install the software that it comes with and then follow these instructions:

  1. From the Apple menu, choose System Preferences.
  2. From the View menu, choose Network.
  3. Choose "Internal Modem" from the Show pop-up menu (or the "Configure" pop-up menu prior to Mac OS X v10.1).
    If your computer does not have a built-in modem, select your external modem.
  4. Mac OS X v10.5 or later: From the Configuration pop-up menu, choose Add Configuration.
    Mac OS X 10.4.x or earlier: Click the PPP tab.
  5. Enter your information into the relevant fields. Your username goes in the Account Name field, for example. If you want to copy this connection information to other user accounts on this computer, select "Save password".
  6. You should now be able to connect. If you need to configure DNS servers or other advanced settings, continue to the next step.
  7. Mac OS X v10.5 or later: Click the Advanced button, then click the DNS tab.
    Mac OS X v10.4 or earlier: Click the TCP/IP tab. Choose either PPP or Manually from the Configure pop-up menu, as instructed by your Internet service provider. If configuring manually, type the IP address in the matching field.
  8. Type the DNS server addresses in their field if necessary (click the "+" button first in Mac OS X v10.5 or later).
  9. Click OK.
  10. Click Apply (or Apply Now for Mac OS X v10.4 or earlier).
Good luck!

Jun 24, 2011 | Apple 133 MacBook Intel Core 2 Duo 24GHz...

1 Answer

How to simulate enter /return key on macbook, many buutons *** not respond, enteer, back, forwaerd, delete...other ways to execute therse commands other than messing around , slow go keyboard viewer....


sounds like you havent installed your os properly and configure keyboard settings correctly or other corruption go back and reinstal and configure your system properly make sure your software is "genuine" not a cheap counterfeit--good luck!

Davey snake!

Oct 19, 2010 | Apple MacBook Pro with 17" Display

1 Answer

Is the belkin f5d7230-4 for macs


Hi! Absolutely, the Gateway Router is OS independent. All you need is a computer with a properly configured Ethernet LAN adapter and a web browser to configure the Gateway Router. Any platform that supports Ethernet & TCP/IP is compatible with the router. You may need to provide additional hardware & software (i.e. Ethernet cards and/or software drivers) to ensure that all clients operate with the router.

Aug 16, 2009 | Belkin (F5D7230-4) Router (587009)

1 Answer

Installing a later version of mac to to get the printer to work


Here is a link for the Mac OS 9 driver for the MFC-420cn:

http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/dlf/000000/000600/dlf000680.html?reg=us&c=us&lang=en&prod=mfc420cn_us&type2=1&os=9&flang=4&dlid=dlf000680



If you need a newer version of Mac OS , you would have to purchase it. Mac OS does not update from 9.1 to 10.X
Mac 9.1 is about 10 years old.

In May 2002, at Apple's Worldwide Developers Conference in San Jose, California, Steve Jobs, accompanied by a coffin, held a mock funeral[5] to announce that Apple had stopped development of Mac OS 9. Mac OS 9.2.2, introduced in December 2001, was the final version of Mac OS 9, and the end of the classic Mac OS.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

May 08, 2009 | Brother MFC 420CN All-In-One InkJet...

1 Answer

Dell 3300 with OS X 10.4?


I've had a similar issue with a Netgear wireless print server. I had to configure it via Windows but was finally able to get it all working by using the Mac CUPS interface. http://shanecrawford.org/2007/27/cups-for-mac/

Dec 17, 2007 | Dell 3300 Print Server

1 Answer

Connecting to Mac OS 10.4.3


The installtion disk would not work since the the installation disk is developed to work only in windows based computers, however, there are always alternate ways to configure routers. You can try using the user guide to configure the router manually. If you are unable to configure it, try the live assistance. all the best

Mar 19, 2007 | GigaFast Ethernet WF718-APR 54Mbps...

Not finding what you are looking for?
HP Color LaserJet 4600n Printer Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...