Pvr-a1 no turn on late of update the firmware. Has solution?

Greetings from Toronto! Also a Bell Fibe and Internet customer.

Try it, but USB Ports on such devices are there to update firmware or for an engineer to connect a laptop. having said that, all this says "yes you can".

On your Bell Satellite TV remote control, press menu. Scroll to and select Multimedia. Scroll to and select External Hard Drive. Scroll to and select Archive recordings.

How to transfer content from my PVR onto an external device ...

https://support.bell.ca > receivers > 9500_hd_pvr_receiver... How do I transfer recordings from Bell Fibe PVR to USB?"); display: inline-block; height: 24px; width: 24px; margin-top: -1px;">
Can you transfer from PVR to USB?"); display: inline-block; height: 24px; width: 24px; margin-top: -1px;"> How do I transfer video from my PVR to my computer?"); display: inline-block; height: 24px; width: 24px; margin-top: -1px;"> How do I use the USB port on my Bell PVR?"); display: inline-block; height: 24px; width: 24px; margin-top: -1px;"> Feedback

How to transfer content from my PVR onto an external device

https://support.bell.ca > receivers > 9242_hd_pvr_plus_...
How to transfer content from my PVR onto an external device ; 1. On your Satellite TV remote control, press MENU. ; 2. Scroll to and select Multimedia. ; 3. Scroll ...

How to turn my Bell HD receiver into a PVR

https://support.bell.ca > receivers > how_to_turn_my_b...
Using the USB connection cord provided with the external hard drive, plug one end into the USB port on the external hard drive and the other end into the USB ...


..

http://tempoaustralia.com/sw/as-pvr1000r/AS-PVR1000R_IM.pdf

DG-DABVPR1TB
down load and put on a usb drive,
DGTEC firmware 2011 updates available

New updates available for service issues such as freezing and start up/ recording issues (firmware 2011) are also available from the DGTEC website.

Please update software first before replacing hardware...


From DGTEC Website Software Upgrades page: -


Click on the relevant link below to download the latest software update for your DGTEC product. For further help and assistance, please access the DGTEC Call Centre via the Support page.



Obsolete Products



* DG-FV500PVR Upgrade (zip file 4.3Mb)

* DG-HD6760 Upgrade (rar file 2.3Mb) Upgrade instructions DG-HD6760 (25Kb)



New Products



DG-HDMP1080

DG-HDMP1080P

DG-HDMP1080TT

DG-HDMP500TT

DG-DABVPR1TB

DG-DABPVR500GB

DG-HD2104AND



Models

DG-FV500PVR - 500GB HD PVR WITH TWIN TUNER (FREEVIEW)
DG-HD6760 - HD SET TOP BOX WITH USB RECORDING
DG-HDMP1080 - HD MEDIA PLAYER
DG-HDMP1080P - WIRELESS HD MULTI MEDIA PLAYER / STB
DG-HDMP1080TT - HD MEDIA PLAYER WITH TWIN TUNER
DG-HDMP500TT - (NEW MODEL RELEASE)
DG-DABVPR1TB - 1TB HD PVR WITH TWIN TUNER WITH INTEGRAT
DG-DABPVR500GB / DG-DAB+500PVR- 500GB HD PVR / TWIN TUNER WITH INTEGRATED
TV-6600 BAUHN UNIT- 500GB HD TWIN TUNER PVR
GG-HD1200PVR- BAUHN UNIT WITH TWIN TUNER
Note: - Master Override Password 1973



Instructions:



Read instructions carefully before commencing. Software needs to be carried out while the PVR is cold. Go to "Telefix" website and select "Service Guide" or "Download Service Manuals" and download software to a location on the PC Hard Drive.
Unzip file and copy "usb.upg" software onto a blank USB Memory Stick.
Plug USB Stick to USB port of PVR


Connect Power to PVR and switch on so that that the booting process commences.
Press 'Menu' button and scroll left or right by using the arrow buttons to find 'Installation' then press OK to select.
Note: PVR may freeze and not allow selection. Several attempts will be required to enable selection. If problem persists, switch OFF PVR to allow it to cool down then try again or use the alternative method.

Alternative Method



1a. Disconnect mains power.

2a. Plug USB Memory Stick to USB port.

3a. Press and hold the CH down arrow button on the unit and then connect mains power.

4a. When the display starts counting down release channel button and the upgrade interface will appear on screen.


7. Scroll down to 'USB Menu' by using the arrow down button then press 'OK' to select.

8. Scroll down to 'USB Upgrade' by using the arrow down button then press 'OK' to commence software update.

· Note: - Please do not shutdown PVR or remove USB Stick during the update process. When the update is complete the PVR will power down and reboot again as normal.

Once the update has completed, reset the PVR by restoring back to Factory Default.
Press Menu ? Installation ? Factory Default ? enter password 0 0 0 0 ? Select 'Yes' ? press OK to rescan channels.

Check Software Version, Press Menu ? Installation ? Version Info ? OK

download and put on usb drive

Software Updates

I need the Firmware update for the TV-6600 BAUHN UNIT- 500GB HD TWIN TUNER PVR as well. Can anyone out there be of any help?

The Sagem PVR 6280 is specifically listed as a model which will have problems with the retune. Although the Sagem PVR 6200 and 6200t are not specifically listed as problem models they are very closely related to the 6280/6240 models and share most of the same firmware and software.

See the address below for a chart of affected models, you'll need to contact Sagem directly on 0845 0900 316 for either an over the air update or an update DVD depending upon the manufacturer.

http://news.bbc.co.uk/1/shared/bsp/hi/pdfs/01_10_09_freeview2.pdf

Sorry I can't provide you with a definite solution but it's very likely that your model is one of those which only Sagem can sort out.

Please return the favour by rating my answer.

I had one with the same firmware faults - in the end I had to return it as Daewoo had no plans to update the firmware. When I returned it it joined a huge pile of them in Currys.

How do i update my firmware on my LG LST 5402p recorder from home??

Try taking the dives out, connecting each one to your SCSI card and updating the firmware - wait at least 10 minutes afet Tape Tools says you can now use it again! This last bit is very important! Then, after you have done the update to each drive, replace the drives and try again.
I had the same problem with a TSL-SA500C and it woked fr me.

Tim

Hi,

If this helps, you can download the manual from HERE

as for the accessories, you'll just have to buy new ones..

The firmware for telephoto converter/ wide-angle converter is included in the attached CD-ROM. Please update it if you have DiMAGE series 7i to A1. Please confirm the firmware version and update it if you have DiMAGE A2 and its version is 1.10. DiMAGE A200 users do not need the firmware updating.