Question about Remote Controls
How to program remote control RRMCG0235AJSB to work with DirecTV blk box & Orion TV
I had the same problem and typed in the model of my vcr instead of the remote model. This is the site I found, although my tv is not on the list, I followed the steps at the bottom of the page and found that code 08 worked for my Phillips TV. I hope this helps all of you with finding your codes and programming your remotes.
Posted on Mar 07, 2008
We're having the same problem here with the Emerson Jumbo remote and Directv, also having a problem with the Magnavox combo VCR/DVD
Posted on May 24, 2008
Orion VCR codes for RCA remotes are: 000, 031, 086, 089, and 130.
More codes and instructions on how to enter them into different RCA remotes can be found here:
Posted on Sep 20, 2009
Tips for a great answer:
Dec 26, 2015 | Remote Controls
The One For All 3 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola
cable box.To control devices other than the default brands,perform the following
steps; otherwise skip this section:
1. Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
2. On the remote control,press a device key once (i.e., DVD/VCR,
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press DVD/VCR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once.After programming
a DVD Combo device, you will be able to control channel
selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
3. Press and hold SET until the LED (red light) blinks twice,
then release SET.
4. Use the Manufacturer's Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn't work, try
Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY.
Mar 20, 2011 | One For All URC-3021 Remote Control
Oct 08, 2010 | Sharp Remote Control
Feb 01, 2010 | Sharp RRMCGA342WJSA Remote Control
Oct 04, 2009 | RCA Universal Remote Control
Aug 27, 2009 | Universal Remote Control DIRECTV Universal...
Aug 24, 2009 | Directv RC-64 Remote Control
Jan 14, 2008 | Sharp RRMCGA342WJSA Remote Control
Nov 09, 2007 | RCA RCR450 Remote Control
120 people viewed this question
Usually answered in minutes!