Question about Innovage Jumbo Remote Control

1 Answer

I have an emerson universal remote control and no codes i need the code to a magnavox dvd vcr combo please help!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 403 Answers

Most universal remotes work the same. Try this.
Here you go. This will work with most all universal remote controls. If you don't have the code do the following:
Automatic Programming
With automatic programming, the remote control tests all the codes available on the Code List and assigns the correct code for the selected device. Although this method can be more time-consuming, it eliminates the need to look up codes and enter them manually.

1. Turn off the device with which you want to use the remote control.

2. Press and hold the corresponding button on the remote control
(TV, VCR, SAT, DVD, CAB or AUD) until POWER INDICATOR illuminates. It should take a couple of seconds for the light to remain solid. The remote control is in programming mode.

3. Press and release power button. The POWER INDICATOR flashes once and stays on indicating the unit is in Power Scan mode.

4. Press CHANNEL up or CHANNEL down repeatedly until the device turns on.

5. When the device turns on, press OK to store the code.

Note:
• To exit without storing the code, press BACK.
• T he unit will search for the next code or the previous code if you press
CHANNEL up or CHANNEL down after the device turns on. (go slow you need to press OK when the TV turns on) if you mess up turn TV off and start over.
6. Press any other button. If the device responds, the remote control has been programmed. If the device does not respond, repeat steps 2-5.

Fill free to ask me questions about anything..........................

Posted on Sep 25, 2009

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: code for philips mg3s universal remote

try this 
http://www.urc.philips.com/find_baseCode.asp?setupDocId=511&efsetupDocId=-1&asDocId=511&readDocId=-1

If that doesn't work go here and it will work for sure!!!!

http://www.urc.philips.com/




If your bored visit http://www.stiffgames.com 

Posted on Dec 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need code for philip s remote for a sayno ty


Philips rca universal remote codes sayno vcr dvd combo ...

www.fixya.com > ... > Remote Controls
Universal Philips Magnavox remote for a Sanyodvd vcr combo ? I have a cableremote and need to program my Magnavox vcr/dvd combo into it i have 2 dvds ...

How to Reprogram a Philips Universal Remote Controller ...

science.opposingviews.com > Computers

Dec 21, 2015 | Philips Televison & Video

2 Answers

Need code for magnavox tv urc-4021boo


Hi, the codes you have requested;

Magnavox - 0054, 0706, 0030, 1454, 1254

Instructions to program code:

1. Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc). NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step 2.

2. On the remote control,press a device key once (i.e., VCR/PVR, DVD, CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo, or TV/VCR/DVD Player Combo press VCR/PVR once.After programming a VCR Combo device, you will be able to control channel selection, volume, and VCR functions. NOTE: To program control of a DVD Player,DVD Player/VCR Combo, or TV/DVD Player Combo, press DVD once.After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions. NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR) Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR) Combo, press CBL/SAT once.

3. Press and hold SET until the LED (red light) blinks twice,then release SET.

4. Use the Manufacturer's Codes (starting on page 18) to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly,
the LED will blink twice. NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.

5. Aim the remote control at the device and press POWER once.The device should turn off. If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works.

Feb 12, 2011 | One For All URC-4021 Remote Control

2 Answers

I need codes for univ.vcr.dvd.combo(Magnavox) Please


0456 [0914 0286] [0969 0286] the codes in the boxes are as follows the first is for dvd the second is vcr

Feb 18, 2009 | Philips Magnavox Learning Universal Remote

4 Answers

Need code for Emerson TV,DVD,VCR Combo


I don't know if you guys even need this advice anymore, as it's 1-2 years late, but if your universal remote has a VCR setting, the Emerson 13" CRT TV/VCR combo I have operates under that mode.
The code I used was 002. These may also work: 278, 184, 479, 000, 121, 211, 037, 043, 061, 208
Remember, program your remote as if you were setting up a VCR (and NOT a TV). For instance, on my GE universal, I hold the "code search" button down until I get a steady light. I hit VCR, and then I entered 002. Works like a charm.

Mar 25, 2008 | RCA Universal Remote 3 Device Remote...

5 Answers

Emerson jumbo remote


snowlady: You probably got it already but if not, here ya go:

Magnavox TV: 004,008, 009, 069, 074, 075, 077, 089, 163, 165

Matthew: 173, 183, 198

ronnmelplus4:

RCA TV: 000, 003, 004, 005, 007, 009, 011, 015, 048, 082, 092, 094, 096, 098, 101, 102, 103, 107, 113, 125, 129, 167, 179, 187, 188, 191, 194

RCA VCR: 000, 003, 021, 055, 060, 082, 083, 084, 086, 087, 088, 089, 090, 091, 107, 110, 115, 120, 125, 134, 137

Emerson Combo: My book doesn't list Emerson, only JVC, Philips, Sansung and Sanyo

Jan 23, 2008 | Emerson EWC19T3 19 in. TV/VCR/DVD Combo

3 Answers

Emerson Jumbo Universal Remote and Directv


We're having the same problem here with the Emerson Jumbo remote and Directv, also having a problem with the Magnavox combo VCR/DVD

Jan 12, 2008 | Televison & Video

2 Answers

Innovage Universal Remote


I have a unversal remote and i can not get it to work for the dvd/vdr I have from magnavox....can someone please help me

Oct 26, 2007 | Televison & Video

6 Answers

Remote control code for magnavox dvd/vcr combo


I need codes for my Universal Philips Magnavox remote for a Sanyodvd vcr combo ?

Sep 07, 2007 | Philips Magnavox Learning Universal Remote

2 Answers

Adding a combo DVD/VCR player to my remote


you can find all the codes in this web site .. http://www.remote-codes.com/ please rate me if this work !

Jun 16, 2007 | Jensen JER-422 Universal Remote Control

Not finding what you are looking for?
Innovage Jumbo Remote Control Logo

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Innovage Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

The Knight
The Knight

Level 3 Expert

74473 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you an Innovage Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...