Question about Eclipse (XA1000) Car Audio Amplifier

2 Answers

Where does the rem wire plug into - Eclipse (XA1000) Car Audio Amplifier

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 24 Answers

I assume you mean the remote wire connection at the amplifier? generally people run the wire to the wiring harness behind the stereo and tap into the radio's ignition only power wire. if you have an aftermarket head unit though, it will most likely already have a dedicated rem +12v power wire for an amp. the wire is usually blue or blue with a white stripe.

Posted on Sep 23, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 59 Answers

It plugs into the power antenna cord on your radio if your radio does not have a dedicated remote cord. The remote switch is so that you amp can detect when your radio is on and turn on too, or is off when your radio is off so as not to drain the battery

Posted on Sep 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Not getting power when ignition is on and what is the rem imput for


the rem input (probably a blue wire) is what tells your amp to come on. the power supply is the red wire, that means that the amp is powered. it is not 'on' until the remote (rem) wire is powered. It acts like a power button or switch that is controlled by your unit. there are ways around conventional wiring if you have trouble getting your unit out.

Jan 29, 2011 | Fusion FEW12PK Car Subwoofer

1 Answer

2007 Pontiac G6 rem wire for monsoon system. I cannot figure out which wire is the rem wire for this system. Any help?


This factory stereo does not provide a switched 12 volt source. You will have to go to an accessory power source in the vehicle. That's what the extended red wire is for.

Sep 20, 2010 | Buck Pontiac G6 2005-2007 05 Stereo/radio...

1 Answer

What is rem


rem means remote on the amplifier which means your amp will turn on when ur radio turns on the remote wire goes from the back of the stereo usually always a blue wire to the rem on the input to the amp

May 23, 2010 | Rockford Fosgate Punch P5002 Car Audio...

1 Answer

Where do I plug in my REM wire from my amp to my


on the back of your head unit is the remote arial wire. this is the one you connect to the rem on your amp

Apr 05, 2010 | Pioneer DEH-P80MP CD Player

1 Answer

Pyle pla2170


The power cable and the rem cable need to have different power sources. The best thing to hook the rem. to is a power antenna wire, or if you don't have a power antenna, you'd need to hook it to the ign. or accessory wire.

Jul 31, 2009 | Pyle PLA2180 Car Audio Amplifier

1 Answer

Install kicker ix254 into a Land Rover Discovery


that wire probs is your rem wire hook it up and try er out john

Apr 19, 2009 | Kicker IX254 Car Audio Amplifier

1 Answer

No power to amp


you need to hook up the rem wire, that runs from head unit to amp its usaully a blue wire on the head unit and there should be a rem input near where the power leads are on the amp

Mar 21, 2009 | Kicker ZX400.1 Car Audio Amplifier

1 Answer

Wiring car amp up


the rem wire is for switched power from your head unit usually most after market stereos(head units) have an output for the rem wire.......if not use the power antenna wire from the back of the radio (usually blue or blue white) as for the input you need to use one or the other low or phono
Hope this helps..Good Luck!

Dec 13, 2008 | Car Audio & Video

Not finding what you are looking for?
Eclipse (XA1000) Car Audio Amplifier Logo

Related Topics:

244 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eclipse Car Audio & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

xxxxxx xxx

Level 3 Expert

4848 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Are you an Eclipse Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...