Question about Amana Dryers
Check the following to address this issue.
1. Heating element
A burned out heating element will show no continuity when measured with a meter. Replace the element if found defective.
2. Thermal fuse
Most dryers have a thermal fuse, which burns out when the dryer overheats, in which case the dryer will either not run at all or stop heating. The fuse is usually located on the vent duct, inside the dryer. A blown fuse will show no continuity when measured with a meter. Before replacing the fuse, make sure the blower wheel is not broken or clogged, and there is nothing blocking the venting.
Posted on Sep 23, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jun 28, 2011 | Amana NED7200TW Electric Dryer
Jun 15, 2011 | Kenmore 659 Electric Dryer
May 15, 2011 | Siemens WT79020EU Electric Dryer
If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.
if you dryer is gas check out this gas no heat tip....
If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.
check out this electric no heat tip...
Dec 22, 2010 | Whirlpool Duet 7.0 Cu. Ft. Super Capacity...
Oct 11, 2010 | Maytag Dryers
Sep 18, 2010 | Kenmore 600 6965 Electric Dryer
Sep 09, 2010 | Maytag MDG308DAWW Gas Dryer
Sep 06, 2010 | Frigidaire GLEQ2152ES Electric Dryer
Jul 09, 2010 | Kenmore 62602 Electric Dryer
Apr 28, 2017 | Amana Dryers
Apr 05, 2017 | Amana Dryers
126 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: