Question about E-Machines T5082 PC Desktop

1 Answer

Computer won't boot.

Fan runs rapidly and loudly. monitor says no signal then screen stays black after power on. tried unplugging cords and restarting but nothing. computer is going on 4 yrs old. should i trash it or are there any fixes?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 63 Answers

Yea your processor has overheated. It can be replaced this is what you need https://www.upgradebay.com/c1_itemdetail.asp?rid=22&itemid=168714521 I would open up the bay door and take a look at the main fan that is attached to the motherboard. If you can get that off then you will be able to see the chip that you need to replace. Make sure to put on a bit of thermal grease before you put the fan back on your new CPU as this was the reason your old one crapped out. Good luck!

Posted on Sep 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cd plays but no display on screen and no touch response.


No display in monitor [Solved] - CCM

ccm.net > Forum > Hardware
Jan 11, 2013 - ... the systeme "always take the main cord off the case before touchinganything ... now unplugged your dvd/cd rom and start your system.if you see no change .... display stayed black even though I could hear the login screen tune play. ... for aresponse but it looks to me as if I shall have to get a new screen. Monitor Gets No Signal / Computer Won't Boot
Nov 12, 2012
Ps3 will not load.
Nov 10, 2012
More results from ccm.net

Double din touch screen not working - YouTube

? 1:51
https://www.youtube.com/watch?v=7pRcIxhbYq4
Oct 3, 2009 - Uploaded by Eighty7Olds442
My screen is not turning on it stays off but if I tuch it it works. Read more ... Only 2 icons of right side were ...

PC powers up but won't POST, no HDD activity light, no ...

www.tomshardware.com > Forum > Systems

Tom's Hardware Guide
Nov 21, 2013 - 24 posts - ‎15 authors
The fans spun and all, no beeps, but when I tried to turn it off with the power button, it worked. ... response from pressing power button (no POST) (Custom, self-built, ... shown on screen, monitor did not wake up, pc power led on yes, no ... nothing, did everything,remember i did not touch the pc when it was ...

Solving Problems



Dec 21, 2015 | Cell Phones

1 Answer

R15d notebook screen black, fans running


either your backlight has failed or you have hit one of the function keys which selects external monitor- can you connect it to an external monitor to see what happens?

May 21, 2014 | Microsoft Computers & Internet

1 Answer

835gm powers up, but monitor power button goes amber, screen stays black and fan stays on high rpm. Had problem in past, usually solved with restart, but have had this computer in storage for awhile, now...


1. It could be bad connection of Memory, CPU, Graphic-cards etc. Try to reseat them aswell.
2. Have you tried replacing the power-unit?
3. Some BIOS es are a bit 'stupid', do you have a fairly new and working monitor plugged in directly (bypassing KVMs)?

Worst case is 'BGA-slip', the bridge-chips and/or onboard GPU has some broken solderings, typically happens to Laptops.

Jul 18, 2010 | Gateway 835GM (835GH) PC Desktop

3 Answers

Monitor power light blinks, then goes out. PC screen goes black.


Unplugging the power cord repeatedly is not a good idea! I hope this helps: 1- After you get a picture, go to "Device manager" (Click on Start-Programs-settings-device manager) and make sure that there is not question or an exclamation mark next to Monitors. If that is the case you might need to reinstall the driver! 2- Make sure that your video card is not faulty by hooking up a different monitor and see if it is working ok. If you still have the same problem, then you need to replace the video card. 3- Check all cables and power cords and make sure that there's good connectivity on all ends (before powering up the machine) and that there are no nicks or cuts. If possible try replacing the monitor's data cable as well. Good luck

Apr 24, 2010 | HP Vs17 17" LCD Flat Panel Monitor

1 Answer

Screen stays black on startup of toshiba satellite L300


have you tried either switching between external and internal monitor usally Fn + F5 on toshiba or try plugging a monitor into the back and see if it displays.
if you get a display on the external monitor then its probably a screen or inverter fault if you donot get a display to an external screen then it is likley t be the graphics on the board itself.
hope this helps

Feb 22, 2009 | Toshiba Satellite Pro L300-EZ1501 Notebook

2 Answers

HP vs17 monitor power button flashes blue but screen stays black.


Try put off Monitor uplug power cord and the VGA cord for 1min and reinsert and restart your PC.

Nov 25, 2008 | HP Vs17 17" LCD Flat Panel Monitor

1 Answer

Turns on but no boot


I had this happen sometimes after a windows update/reboot.
If the computer is on, hold down the power button until it cuts off.
Unplug the power cord. Wait for a couple of minutes.
Plug the cord back in, and turn on system.

Oct 27, 2008 | Acer Aspire T160 (AST160UA3400) PC Desktop

2 Answers

Computer won't turn on.


have u tried to unplug the power cord and open up the case aand unplug the power supply from the motherboard and then pressing the power button then plug the powersupply back into the motherboard and pluging in the computer and see what happens please keep me posted so i can help you more if needed ok best regards mike

Aug 19, 2008 | Gateway GT5220 PC Desktop

2 Answers

Loud Fan, Three Beeps, Black Monitor and No Keyboard response


I have the same model after youlet it sit for a long enough period to cool down it will come back on and work normal, it is a cooling problem called gateway and they confirmed this theproblem I ran in to was what fan this computer has 3. temp fix I used was to remove the tower cover to allow better air flow try this till you can figure out what fan is messing up

Jun 02, 2008 | Gateway GT5404 PC Desktop

1 Answer

No signal on startup


if monitor is gave no siganl .Firstaly Check monitor Signal Cable For connected of ur system vga port. if Siganal cable is connected ur pc then Check ur System IF system is gave the Display anthore monitor . Then Proble is ur monitor signal Cable .So Plz Change Monitor Signale Cable.

Dec 29, 2007 | Princeton Digital VL2018W Monitor

Not finding what you are looking for?
E-Machines T5082 PC Desktop Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Alun Cox

Level 3 Expert

2678 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...