Question about GE 28112EE2 Cordless Phone

2 Answers

No longer can get a dialtone

I have had this phone without any problems for a year. Then one day, I can no longer get a dial tone. All the lights on the phone and docking station all work fine, as does the page feature. There is just no more dial tone. It is not the outlet, as other phones work fine. Any suggestions?? Thanks, Suzanne

Posted by on

  • 4 more comments 
  • porsche01 Dec 28, 2007

    I have the same problem at least once a day. All you have to do is unplug the back and plug it right back in. A major hassle but it takes care of the problem immediately. I hope that's all that is wrong with your phone.

  • SuzinAtlanta Jan 01, 2008

    Thanks for your replies, but this did not solve my problem. Any other ideas?

  • SuzinAtlanta Jan 01, 2008

    Thanks for your replies, but this did not solve my problem. Any other ideas?

  • porsche01 Jan 01, 2008

    I just want to clarify that when I no longer have a dial tone - I have to unplug the power cord not the phone line from the back of the base unit and that corrects my problem immediately.

  • toryjack Jun 05, 2008

    I only had my cordless for a week when i picked up the phone from the base charger to answer a call and it would not do anything as if it was unplugged or dead. I had to use the other phone that came with it and it worked fine. i am now trying the unplugg and recharge suggestion.

  • bcasey Aug 11, 2008

    I don't get a dial tone - it just beeps a couple of times. have two phones and both have the same symptoms.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I was not getting nothing from my phone ,i unplugged it for 30 seconds and it worked. thanks everyone.

Posted on Jun 05, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Yes, the latest poster has the answer. Just unplug the phone line from the base unit and make sure the contacts are not dirty on either the phone line or the connector in the base unit and be sure to firmly push the line into the connector.

Posted on Dec 29, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why no dial tone. Only static?


Check the phone line were it comes into the house there is usually a point where the phone connection from the the TELCO outside wires connects to the inside wiring.
Remove the inside wiring and test the wiring that is on the TELCO side. If you get dialtone the trouble is in the inside wire. If you don't get dialtone call TELCO

Aug 26, 2014 | Lands Phones

1 Answer

Panasonic kx-tg2511e two-tone dial tone


It's stutter dialtone and indicates you have voicemail. Once you clear your voicemail the stutter tone will go away. You may also have a visual indicator that you have voicemail like a light or icon on the display.

Oct 23, 2012 | Panasonic KX TG2215S Phone (KX-TG2215S)

1 Answer

How do I get the phone off DND mode


A common problem on the NEC Electra/Elite phone system is that users will pick up the phone and start dialing numbers while hearing intercom dialtone which sounds identical to outside line dialtone. If the user dials 4 then 0, DND is set on that phone ext. The easy way to clear this problem is to go to the phone that is in DND, lift the handset or press speaker and dial 4 then 2. You should get a confirmation tone after which you can just hang up.

Jun 05, 2011 | NEC DTH-8D-1 Corded Phone

1 Answer

I cannot get a dial tone it sound like the line is stayed open


Cellular phones to not use tone dialing. If you hear a dialtone at anytime it is simulated by your phone company however their is no dialtone.

Dec 23, 2010 | Cell Phones

1 Answer

Intellifax 4750e phone and fax line stays open, no dial tone


Is the fax machine on? (Are the lights or screen lit up?) Make sure that the line going from the fax machine to the wall jack is plugged into the LINE port on the fax machine, and not the TEL port.

Try plugging a regular phone into the wall jack where the fax machine is currently plugged in... do you get a dialtone? If so, the problem is either with the fax machine or the way it is configured.

May 27, 2010 | Brother IntelliFAX 4750 Plain Paper Laser...

1 Answer

I can't get dial tone and can't dial out.


make sure the phone is plugged in. You'll need dialtone first, the other issue will fix themselves once you have dialtone!

Feb 10, 2010 | Lucent 1872 Corded Phone

1 Answer

No dial tone


plug out the fax... plug in a phone... if still no dialtone... replace phone cable... still no dial tone... call the phone company...

plug out the fax... plug in phone... dial tone heard... bad fax... try to reset fax machine... per instructions... still no dial tone... call repair guy...


I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d

Dec 18, 2009 | Office Equipment & Supplies

1 Answer

Dialtone, but no dialing


Uniden offered a replacement, stating that the base phone was probable beyond repair.

Jun 04, 2009 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

GE 28111 Twin Cordless Phone "Line In Use"


I had the same problem. I went to each handset and pushed the talk button. After I got a dial tone, I pushed it again to stop the dial tone. The message went away.

Aug 14, 2007 | GE 28111 Cordless Phone

1 Answer

Can't dial out


Can you hear the tones when you dial? Is there a (tone / pulse dial) switch or programming option?

Jul 02, 2007 | Uniden DXAI4288-2 Cordless Phone

Not finding what you are looking for?
GE 28112EE2 Cordless Phone Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Lands Phones Experts

Cindy Wells

Level 3 Expert

5579 Answers

Dudeman321

Level 2 Expert

233 Answers

Marvin
Marvin

Level 3 Expert

82285 Answers

Are you a GE Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...