Question about HP LaserJet 4250n Printer
Remove the jetdirect network card from the printer. Does it still error. If so, hold down the green tick button and power the printer on.This will cold reset the printer.If it still wont work carry out an engine test print test. on the right handside you will find a small hole. if you find something that will fit this hole, say the inside of a pen, push it in the hole and you should feel it press a button. if a test pages comes out with lots of lines on it then it generally means the engine of the printer is working. This could mean it's a formatter board fault, the board that has the network card and parallel port on it
Posted on Oct 02, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jul 19, 2012 | Fisher and Paykel Washing Machines
Jul 22, 2011 | Canon PIXMA MP210 Photo All-In-One Printer
SecureEasySetup (Orange/White) The Cisco logo is the Router's SecureEasySetup button. It
lights up and will stay orange when the Router is powered on. The color orange indicates that
the Router is not using the SecureEasySetup feature, while the color white indicates that the
Router is using the SecureEasySetup feature. When the Router enters SecureEasySetup
mode, the Cisco logo will turn white and start flashing. After the Router has generated
the SSID and WPA Personal key, the Cisco logo will stop flashing and stay white.
To clear the SSID and WPA Personal key, press and hold down the Cisco logo for five seconds.
The Cisco logo will flash slowly as the Router resets itself. The Cisco logo will turn orange to
indicate a successful reset.NOTE: SecureEasySetup is a feature that makes
it easy to set up your wireless network. If you have SecureEasySetup devices, run the Router's
Setup Wizard CD-ROM and follow the onscreen instructions to use SecureEasySetup.
Power (Green) The Power LED lights up and will stay on while the Router is powered
on. When the Router goes through its selfdiagnostic mode during every boot-up, this
LED will flash. When the diagnostic is complete, the LED will be solidly lit.
DMZ (Green) The DMZ LED indicates when the DMZ function is being used. This LED will
remain lit as long as DMZ is enabled. WLAN (Green) The WLAN LED lights up when
the wireless feature is enabled. If the LED is flashing, the Router is actively sending or
receiving data over the network. 1, 2, 3, 4 (Green) These numbered LEDs, corresponding with the numbered ports on the Router's back panel, serve two purposes. If the LED is continuously lit, the Router is successfully connected to a device through that port. A flashing LED indicates network activity over that port.
Internet (Green) The Internet LED lights up when there is a connection made through the
Internet port. A flashing LED indicates network activity over the Internet port.
Nov 26, 2010 | Computers & Internet
Apr 07, 2010 | Honda VT 500 C Shadow Motorcycles
Nov 11, 2009 | Linksys Wireless-G WRT54G Router
Nov 02, 2009 | AOC 5 En 15" CRT Monitor
Aug 04, 2009 | Canon Office Equipment & Supplies
May 20, 2009 | Canon PIXMA MP210 Photo All-In-One Printer
Oct 17, 2007 | Canon PIXMA MP150 All-In-One InkJet...
275 people viewed this question
Usually answered in minutes!