Question about Canon PowerShot SX110 IS Digital Camera

3 Answers

Canon Powershot SX110is: problem with the batteries

I put 2 full unused AA batteries in my Canon Powershot SX110 is camera, but it still says that the battery is low and should be replaced wiith ful batteries. Why does it keep on saying this even though the battery is full?

Posted by on

  • palvash Nov 16, 2009


    Hi sanctakathar,


    I am facing exactly the same problem. Did you find any solution? It would be a great help if you could share the solution with me.


    Thanks



  • dori634
    dori634 Aug 08, 2012

    I will really appreciate getting a solution to this.DD

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Make sure you are using Lithium batteries. Alkaline batteries will go dead immediately in this camera. I've tried it.

Posted on Nov 10, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

I have a Canon PowerShot A75 camera that had the same problem with the "Replace Battery" message appearing immediately even after I had put in brand new out of the package recommended batteries. I tried all the remedies I could find by reading on the Internet. Here is what solved the problem: I bought and put in the Eneloop hybrid NiMH Rechargeable batteries and have had no problems since then even though I have taken many, many photos since putting in that type of battery. Result: One camera that I love being salvaged instead of being discarded.

Posted on Sep 30, 2014

  • moonlitememo Sep 30, 2014

    I have a Canon PowerShot A75 camera that had the same problem with the "Replace Battery" message appearing immediately even after I had put in brand new out of the package recommended batteries. I tried all the remedies I could find by reading on the Internet. Here is what solved the problem: I bought and put in the Eneloop hybrid NiMH Rechargeable batteries and have had no problems since then even though I have taken many, many photos since putting in that type of battery. Result: One camera that I love being salvaged instead of being discarded.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 11,967 Answers

Try cleaning the battery contacts with a cotton swab lightly dampened with rubbing alcohol.

Posted on Sep 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the back from my Canon SX110IS? I have removed the 2 screws on the back above the lcd, one each on L and R of case, 2 below screen, one 1ach in A/V and battery compartments, but the back...


There are TWO screws on the right side, one is hiding under the cover for the USB connection!

Now you should be able to pop it off and... I'm guessing here... replace your cracked LCD screen. Good luck, hope this helps.

Thomas Drayton
Owner www.darntoothysam.com
Affordable Digital Camera Repair

Aug 03, 2011 | Canon Powershot SX110 IS Digital Camera...

1 Answer

Hi my canon powershot sx110is,has a problem when i try to zoom in or out the camera shuts down and it says lens error,restart camera i tried new batteries taking out all the batteries etc help please


Hiyour unit might has in zoom control gear unit or zoom in and out detecting sensor area. this type of problem might has two solution to technician. first is change defective gears. second is a whole lens unit replactment. either or any other problem of this type of camera they just charge you around $65 to 115 depend on what your local repair shop want to charge.

Jun 03, 2011 | Canon PowerShot SX110 IS Digital Camera

1 Answer

I dropped the canon sx110is and now there is no realtime display when trying to take pictures now.


If the camera still takes and downloads photos correctly it sounds that something is wrong with just the display - the LCD may be smashed or a connection went loose. Sounds like a job for Canon professionals, but do search for other solutions.

Nov 29, 2010 | Canon Powershot SX110 IS Digital Camera...

1 Answer

I cannot download picture from power shot SX110IS camera


hi,
Sounds like your PC have communication problem with the device, Uninstall your existing camera software/driver from Computer (PC), download driver for here for SX110 IS and then is install it after downloading it.

I hope this will solve the problem.

Thanks...!!

Oct 17, 2010 | Canon PowerShot SX110 IS Digital Camera

1 Answer

My Canon PowerShot SX110IS shows "Card Locked!" on the screen even though the memory card is not locked.


I am having a similar problem. It worked fine. Took pictures in AM. By PM I received the same message. The memory card is NOT LOCKED, yet it is reported as so.

Aug 17, 2010 | Canon Powershot SX110 IS Digital Camera...

1 Answer

I dropped my camera (powershot sx110is) its taking blank pics


lens unit shutter section failure,take out the shutter unit replace the broken part,if not take to a camera tech

Mar 07, 2010 | Canon PowerShot SX110 IS Digital Camera

1 Answer

I have a canon powershot sx110is and when i turn it on it will not take any pictures but instead gives the message "memory card error." When I put it to the display mode it says the same message plus...


First see if the camera will work without the memory card installed. Then format the internal memory using the camera's setting as described in the manual.

Then turn OFF the camera and insert the sd card. Turn on and reformat the card too.

Make sure you have NEW batteries or sometimes things go flakey.

Dec 22, 2009 | Canon Powershot SX110 IS Digital Camera...

1 Answer

Communication error????


Blame Microsoft updates. Try using a card reader instead...works every time.

Nov 23, 2009 | Canon PowerShot SX110 IS Digital Camera

1 Answer

A580 wont switch on with new correctly inserted batteries


Check for battery current ratings, Canon cameras need AA batteries with current rating above 1200 mAh, I use Energizer rechargeable batteries for my Canon Powershot SX110 IS. The batteries last more if we use the flash option wisely.

Jul 25, 2009 | Canon PowerShot A580 Digital Camera

Not finding what you are looking for?
Canon PowerShot SX110 IS Digital Camera Logo

Related Topics:

1,894 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

kakima

Level 3 Expert

102366 Answers

TC CAMERA REPAIR.Com...

Level 2 Expert

169 Answers

old marine
old marine

Level 3 Expert

1978 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...