Question about Volfenhag ZX-5007 Car Audio Amplifier

1 Answer

Volfenhag amp adjustments

What adjustments should i make to the knobs on my volfenhag 840 watt amp that's running to 2 10 inch subs, for max performance? Thete is a gain, low pass, high pass, and bass knob, as well as a low pass/full/high pass switch and a 30hz/80hz/120hz switch. Please help me figure out how i should set it all.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 67 Answers

Firstly, you will want to set all options to a low pass, so the high frequencies are filtered away from the subs, avoiding damaging the voice coil. Start with the Gain of the amp about 3/4 of the way up, and all other knobs, such as the bass knob to the lowest setting. From there, test your subs for soujnd, and then change the gain and amount of bass for the sound you desire, since each person is different. I have my gain about 1/2 way up and the bass about 1/4 of the way up. If you have a crossover knob, set it to the highest frequency available, since the low pass will filter all the high frequencies out anyway.

Posted on Sep 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What speakers I can wire to my amp? a volfenhag zx-8200 1000 watt amp. Currently 800 watt bose sub bridged to it, capacitor as well. and a 150amp circuit breaker. I have a 14 volt 105 amp alternator.


1. It depends on how many and what type of speakers you run.

It is a 'bridgeable' amp and therefore has a variable number of configurations.

You can run that Bose sub on one channel and twin up. It's not a great idea to have the drivers max near or lower than the output of the amp and puts out serious thump from a 30W cone.

Jan 15, 2017 | AMP Car Audio & Video

1 Answer

I have a 2000 w volfenhag amp and a 15 in cadence 350/600 rms watt sub, what gauge wire should i use?


I would use a 4 gauge wire for the power supply to the amp and a 4 gauge neg of the amp

Jun 25, 2016 | Volfenhag Car Audio & Video

2 Answers

Digital audio dab 2204 Just want to knw how many watts is the amp.


Websites Get Hacked, Backup Data 2GB Free Website Backup In Cloud!

Sep 22, 2011 | Digital Audio Car Audio & Video

1 Answer

I have a boss rt645 2ch 1400 watt amp would this amp properly push a pair of 12 inch mtx terminators.


That all depends on the wattage of the subs. also the independance of the subs. If your amp is 1400 watt, maximum you want is 2 600watt subs. if your subs are higher you will blow your amp eventually as your amp isnt powerful enough to pump out to that level.You should never have your amp fully turned up to max, 80% is perfect and will not make your amp blow. Hense why you want your subs less than the max output of your amp.

Mar 04, 2011 | Boss AUDIO RT-645 2-Channel Riot Series...

1 Answer

Need more bass


Bridge it. Should be marked on amp. According to specs should get u the power u need. Amp max 1500 watts. at 2 ohms. Speaker max is 2200 watts at 4 ohms. Turn amp down and adjust to your own taste. trust your ear man.

Jul 12, 2009 | Car Audio & Video

1 Answer

Settings for a Sony Xplod 1200 watt amp, with two 12 inch subs


What kind of subs are you running? Meaning what brand, what are the ohm, spl and wattage? I'll look up your amp while you get that info to me. Looking forward to helping you:) Thanks!

Apr 08, 2009 | Sony Xplod 1200W Class AB Bridgeable 2-Ch....

1 Answer

I have two volfenhag 1000 watts speakers


If you are looking for some serious sound try using a Rockford Fosgate P3001T Amplifier.. it pushes 3000W Max its a 4 channel amplifier. Or you could go with something small. I have two JL Audio 10s in my car running with a 600W 2 Channel MTX Amp.

Apr 03, 2009 | Volfenhag ZX-4812 Car Subwoofer

1 Answer

Subwoofers were said to be bad


overpowered definitely. when you bridge subs your almost doubling the power. if the subs were set for 2000 then the guy he took them too should have known better or at least turned the power down on the amp.

Mar 13, 2009 | Car Audio & Video

1 Answer

Amp and sub connection


Too many problems, lol. One at a time. I lost you in your post, run by me again but one amp at a time.

Jan 08, 2008 | Sony Xplod XM-1652Z Car Audio Amplifier

Not finding what you are looking for?
Volfenhag ZX-5007 Car Audio Amplifier Logo

Related Topics:

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volfenhag Car Audio & Video Experts

Robert Rankin

Level 2 Expert

338 Answers

Professor_V
Professor_V

Level 2 Expert

92 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Volfenhag Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...