Question about Bosch 12" Dual - Bevel Compound Miter Saw with Upfront Controls and Laser Tracking 4212L

2 Answers

10 Craftsman Compound miter saw

I borrowed this saw from a friend and while using it the laser light went out. I cleaned any sawdust that may had impeded it to no avail. And have found no problems of thei type on the web.
Can you help me ?
Carl H.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has answered 200 questions.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 313 Answers
Re: 10 Craftsman Compound miter saw

Toolpartsdirect for parts diagram or

Posted on Jun 03, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: 10 Craftsman Compound miter saw

My laser guide does not work. I changed the batteries as shown in my owners manual and it still will not work. Any suggestions whether I have made some king of an error or should it be replaced? It is a pain in the posterior taking it apart and putting it back together to see if it is working. Thanks

Posted on Jan 05, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Skil Compound Miter Saw laser quit working, Help

SKIL 10" Compound Miter Saw 3317-01 Skil10 In. Compound Miter Saw with Quick Mount System and Laser Cutline. Model #3317-01 ... manual Get Manual (PDF); parts list Get Parts List (PDF) ...

[PDF]Operator's Manual 10 in. COMPOUND MITER SAW WITH ...

Dec 14, 2015 | Skil Circular Saws

1 Answer

The only way to turn the saw off is to unplug it. Ryobi 10 inch sliding compound miter saw model TSS100L

You may be able to take the handle apart and, using compressed air, blow any sawdust out of the handle and switch but most likely you'll have to replace the switch.

Feb 14, 2014 | Makita 10" Miter Saw LS1030N

1 Answer

Laser guide on Bosch 4410L miter saw is off.Can it be adjusted?

I looked thru their onwers manual and the parts breakdown and find no reference to adjusting the laser. I would recommend calling them direct at 1-877-267-2499 for assistance. I wish I have better information but this is all I can find. Good Luck

Nov 15, 2009 | Makita 10" Dual Slide Compound Miter Saw...

1 Answer

Craftsman 12 in. Compound Miter Saw w/Laser Trac stopped working

the hole saw or just the laser part , and ck to see if it has a reset button on the end of motor if so push it in until clicks ,

Jan 02, 2009 | Dewalt DW746X 10" woodworker's table saw...

1 Answer

Makita ls1013fl I need instructions on how to install

I installed it by looking at the parts pictures in the manual and experimenting. Thanks for the try at helping me.

Dec 14, 2008 | Makita LS1013FL 15 Amp 10 Inch Dual Bevel...

1 Answer

Craftsman compound miter

if its like my dewalt, u have to unscrew it before u canunlock the handle. try unsrewing it.

Sep 05, 2008 | Bosch 12" Dual - Bevel Compound Miter Saw...

1 Answer

Bosch sliding miter saw, the bearings in the slide mechanism are catching making a jerky slide, have tried wd40 any ideas?

Have you tried blowing out the mechanism with a compressed air nozzle? Frequently this friction is caused not by the bearing itself but instead by debris, sawdust, etc. built up inside the base of the saw. I'd give it a good cleaning to begin with.
If that doesn't work, try applying bearing lubricant directly to the bearing races.Use an extension straw if needed so you can get to them, as this is designed to penetrate where even the reliable old wd40 may not reach. You can find this a specialty woodworking stores, as well as some well-equiped home centers.
Let us know if this works, or you've already solved the problem...

Jul 29, 2008 | Bosch 12" Dual - Bevel Compound Miter Saw...

1 Answer

Craftsman 10-in. sliding compound miter saw

there should be a safety latch on the right ..down by the base or at the back you should have to press down on the saw to release it.hope that helps..

Jan 13, 2008 | Bosch 12" Dual - Bevel Compound Miter Saw...

Not finding what you are looking for?
Bosch 12" Dual - Bevel Compound Miter Saw with Upfront Controls and Laser Tracking 4212L Logo

3,551 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Circular Saws Experts

james allen
james allen

Level 2 Expert

109 Answers

Pieter Vleeshouwers

Level 3 Expert

1333 Answers


Level 2 Expert

223 Answers

Are you a Bosch Circular Saw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides