Question about Xerox WorkCentre Pro 765 Laser Printer

1 Answer

I need to reset the drum count on Workcentre Pro 765, How do i do this?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 239 Answers

I understand you have a situation to reset the drum.
I am still researching this, I forgot the process, sorry.
But If i remember, this might work.
Press and hold these buttons. Menu, 1,3
Power up the machine while holding them.
If you get a messge that says enter code.
It is either 80, 81, or 82.
You can also try to reset the mother board which will defalt all settings on the machine to factory settings. Menu, 1,3, *.
Hold buttons and power up machine, hold buttons for about 15 seconds.
If the star does not work, try the "#" instead.
Your information needs to be reentered in the mahine via the menu button, speed dials, trays sizes you are using.
You may want to print out a reports configuration first before preforming these funtions.
This machine can print out a table road map to show what available menues can be configured.
If this does not work. Then do not try to enter anything else.
It has been so long, I would have to be in front of this machine.

If you are not sure what you are doing, place a service call on this machine and let the service representative handle it for you.
If your machine has been operating pretty good, and you wish to keep it longer, pay the fee and you will have a much better machine to use.
This is a good machine if you wish to keep it longer.
Good luck.

Posted on Aug 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Codigo 05.283 xerox 7655


El manual responde que la DADF onde escanias tus papeles tiene un sensor malo adonde se sale el papel.

Esto es para la WC7655?
005-283 RAP
BSD-ON: BSD 5.2 - Document Stacking
DADF Stack Height Sensor Logic Fail.

Jun 14, 2016 | Xerox WorkCentre Pro 765 Laser Printer

1 Answer

How do you replace the drum in a Xerox 765?


Hi,
You can get all the necessary information to troubleshoot your printer from the given link below. this link is helpful for you in future too.
Xerox Workcentre Pro 765 Laser Troubleshooting
Regards,Suhail

May 11, 2012 | Xerox WorkCentre Pro 765 Laser Printer

1 Answer

Need to reset replace drum message on Xerox Workcentre Pro 416


You can replace the chip on the drum unit. Or the drum unir itself.
Google a business called " the parts drop". They will have both the chip and or the drum cartridge. It is not resettable with a diagnostic code.

Aug 19, 2010 | Xerox WorkCentre Pro 416DC Copier

1 Answer

Xerox 657 drum reset instructions


need to replace 1/16 A pick-tale(brown color with strips on it) fuse on blank lamp assembly in drum unit

May 06, 2010 | Xerox WorkCentre Pro 635 Laser Printer

1 Answer

Machine display Full memory messege. Idone what


On this fax machine if you tried everything and still no luck, you might want to try to reset the main board.
This will reset the main board to factory settings.
When you do this, you may need to enter all your information back in again, speed dials, date, time, ect....
On this type of problem, sometimes this works, sometimes the problem maybe more indepth such as, replacing the main board on the machine. I am talking about the large mother board.
Hold down these buttons at the same time... Menu, 1, 3 and * button.
While holding these buttons, use the left hand to power on the machine, while holding these buttons for about 15 seconds...
When you let go of them, the machine should come back on to a normal screen.
There can be other changes in the memorywhen you reset the main board information.
If the machine does not come back on to a normal messege screen, you may need to replace the mother board.
Good luck.

Sep 03, 2009 | Xerox WorkCentre Pro 765 Laser Printer

2 Answers

I have a Xerox XD125F Workcentre. The J2 toner


1. turn off XD125f
2. Turn on
3. within 4 seconds press, clear, auto, clear, auto. LED Should go blank,
if not try again
4. use copy quantity keys to enter 24, then push start
5. Again use copy quantity keys to enter 7, then push start
6. turn off
when you restart the cartridge count will be set to zero

I have done this twice and never replaced the drum cartridge.

Jul 24, 2009 | Xerox Office Equipment & Supplies

4 Answers

I wish to read the total copy count on Xerox WorkCentre M15i


You have to print out the meter report.
  1. Press the [Reports] button on the Control Panel

    m15-console-report-but.jpg

  2. Press the [Up] or [Down] arrow until 'Systems Data' is displayed on the Display Screen.
  3. Press the [Enter] button.

    The System Data list will be printed with the following information:
    • Total Page Counts: Total number of pages printed
    • CRU Prints: Number of pages printed using the current Toner (Dry Ink) Cartridge
    • Replaced Toner Counts: Number of new Toner Cartridges installed in the machine
    • Replaced Drum Counts: Number of new Drum Cartridges installed in the machine
    • Current Drum Page Counts: Number of pages printed using the current Drum Cartridge
    • Platen Scan Page Counts: Number of pages scanned using the Document Glass
    • ADF Scan Page Counts: Number of pages scann

Apr 19, 2009 | Xerox WorkCentre M15i Laser Printer

1 Answer

We are getting a "drum life warning" signal on our workcentre pro 765. how do we proceed?


Basicly, the copier has a built in counter, that when it get's to that count. It is tring to worn you that the drum unit is almost at the end of it's life and will need to be changed soon. In time the copier will lock up and code out.

Jan 15, 2009 | Office Equipment & Supplies

1 Answer

Xerox 765


Reading your question, this is what I can mention to you.
On this machine just replace the drum and continue your work. The information should be still in memory. Print out the job number.. You can tell how much memory there is because it tells you in % on the menu.

If you do not replace the drum, you will get streaks on your copies.
Good luck.

Nov 28, 2008 | Xerox WorkCentre Pro 765 Laser Printer

2 Answers

WorkCentre 555 Fax Drum


This will reset it for you. strange !!!!!

NOTE: Perform the following procedure to reset the Drum Cartridge counter after you replace the Drum Cartridge. Do not perform this procedure at any other time.
  1. From the Standby Mode, press the [Menu] (up arrow) button, then press [5], [2], [0], [4]. The screen will display: Change drum.
    1. Yes
    2. No
  2. Press [1], then press [Enter]. The screen will display: Completed.
  3. Press [Stop] to return to the Standby Mode

Mar 14, 2008 | Xerox WorkCentre Pro 555 Plain Paper Laser...

Not finding what you are looking for?
Xerox WorkCentre Pro 765 Laser Printer Logo

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Xeroxrep

Level 1 Expert

33 Answers

Philip Hughes

Level 2 Expert

72 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...