Question about Cisco 7940 IP Phone

1 Answer

Just configures a 7940. Noticed my name is displayed on top of the screen and so overwrited the date and time. How can I change the position of displaying the name?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 4 Answers

You cannot change the position - you will just need the shorten the number of characters that you are using.

Posted on Nov 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reset asus eee top to factory setting


Open the display on your Asus and click the "Shut down" tab in the lower-right corner of the desktop.
Click "Yes" when prompted, to confirm.

Power on your laptop, and press the "F9" key when you see the logo screen.
A menu will pop up with a list of three options.
Select the "Restore Factory Settings" option (which is the last one in the menu).

Select "Yes" when prompted, then hit the "Enter" key to confirm the reboot.

Wait about 30 seconds for the system to restart, then agree to the licensing agreement when prompted.

Confirm your name, password and time and date when prompted.
Then wait as your computer configures.

hope this helps

Aug 23, 2012 | ASUS Eee Top ET2002 20-Inch All-in-One...

1 Answer

We have the Meridian M7208 phones from 1987 at work. I need to reset the date and time. All the user guides I could find say I have to push "Next" after entering the feature code and admin, but...


It took me forever, but I just had to figure this out too for my boss. Here's what I did, and hopefully it works for you.

Do you have a screen at the top of your phones and a screen to the right side? If so, this should work.

Hit the Globe Button or Feature Button, whatever's there.

Then you'll type in **266344 as usual, then the password. When the A.Configuration screen pops up, that's the start of a long menu.
At this point, looking to the screen on the right, you should see 3 arrows.

If you don't have that screen and 3 arrows, you can stop here because I don't know that this will work for you.

If you do:

Press the left bottom arrow button until B. General Admin appears
Hit the top right arrow
Hit the bottom right arrow until Time/Date appears
Hit top right arrow
At this point, the time will display up top
Hit Change (should be the 3rd button underneath your top screen)
Enter 2 digits for the hour
Hit the bottom rt arrow
Minutes will appear
Change to the appropriate minute and hit the bottom rt arrow again
Change AM/PM this way as well, and the date if needed.

Once completed, it should bounce you back to the menu (4. Direct Dial)

To exit from the menu, you can hit the Red button on your phone with the phone picture and the downward arrow.


I'm sure there's lots you can do in that menu, but I found it really frustrating to navigate.

Hope this works for anyone trying to work around a phone from 20 years ago!

Feb 23, 2011 | Nortel Meridian M7208 Corded Phone

1 Answer

How to change the time and date on nortel phone


Programming2.gif is done on 7310, 7324 and 7316 type sets.
Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say A. Configuration. The 4 top line/feature keys are now used for programming.
Press "NEXT"(bottom right arrow)
display should read B.General Administration.
Press the show key (top right arrow)
display should read 1.speed dial
Press the next key 2 times(bottom right arrow) .
display should say 3.time and date
Press the show key (top right arrow)
display should show current programmed time
Press the Change key
Enter in time in 12 hour format
press ok
press either Am or PM when prompted
press ok
press the Rls key when finished

Nov 04, 2009 | NorStar T7316E Corded Phone

2 Answers

Display name / date time


1)First tell me mob-ph-whitch company.2)mob-ph-Model-no-otherwise donot solve.

Aug 25, 2009 | Lands Phones

1 Answer

Lenovo thinkpad R51e ,when i power on the laptop it show error271


This error message is generated when the BIOS Date and Time is incorrect. Go into the BIOS configuration to change the Date and Time. When you reboot and still get the same error message then the BIOS battery is flat and needs to be replaced and the Date and Time setting needs to be change to the current Date and Time after replacing the battery.
If you cannot get into the BIOS configuration (press F1 on bootup) or you get a lock icon in the top LH corner of the screen, this is a Power on Password symbol, enter the passsword to bootup the laptop and then press F1 to get into the BIOS configuration.

Aug 10, 2009 | Lenovo ThinkPad R51e Notebook

1 Answer

I am trying to reset my T Touch watch from Tissot and can not find book. need to reset time and also how to convert from metric to US standards, like ferinhit and from meters to feet.


SET TIME:
1. Activate Crystal
2. Tap center of screen until digital time comes up
3. Press and hold top button (+) until watch beeps, display will be flashing
4. Use + and – key to adjust time. If several hours off, hold appropriate key and
after first hour passes, only the hour hand will move.
5. Make sure the digital display shows A or P for AM or PM
6. When finished, touch center of screen again.

SET DATE:
1. Activate Crystal
2. Tap center of screen until date appears
3. Press and hold top + button until watch beeps and display flashes.
4. Use + and – buttons to change date to correct one.
5. Make sure to set time first, if you set date first, you run the risk of the date
changing at noon rather than midnight.

Nov 26, 2008 | Tissot PRS 516 T91142651 Wrist Watch

1 Answer

Xerox workcentre Pro 575 How do I change the time of day setting


  1. From the Standby Mode, press the [Menu] (up arrow) button, then press [4], [2]. The screen will display: Date.
    [01-31-2000]
  2. Use the numeric keypad to enter the date and the arrow buttons to move between the fields, then press [Enter]. The screen will display:Date format.
    1. MM-DD-YYYY
    2. DD-MM-YYYY
    3. YYYY-MM-DD
  3. Use the numeric keypad to designate the Date format you require to use. The screen will display: Month format.
    1. Numeric: displays the month with a number
    2. Name: displays an abbreviated month name.
  4. Use the numeric keypad to designate the Month format you require to use. The screen will display: Time format?
    1. 24 hour
    2. 12 hour
  5. Use the numeric keypad to designate the time format you require to use. The screen will display: Time.
    10:30 pm (or 22:30 pm if you chose the 24 hour format).
  6. Use the numeric keypad to enter the time and the arrow buttons to select [AM] or [PM], then press [Enter].
  7. Press [Exit] or [Stop] when the menu selection screen displays to return to the Standby Mode.

Nov 20, 2008 | Xerox WorkCentre Pro 575 Plain Paper Laser...

1 Answer

Westclox Travel Alarm


After selecting either TIME, DATE, or ALARM at the top of the screen, use the stylus to touch and hold the large time display. Hold it there for about 5 seconds and the clock will beep and the time display will start flashing. Then you can touch either the hours or minutes and it will increase by either 1 hour or 1 minute accordingly. When the DATE is selected, it shows the year in the large display. Again, holding the stylus on the year diaply for about 5 seconds will enter into the chqange mode. IN all cases, to exit the change mode simply select one of the other selections across the top: TIME, DATE, ALARM.

Jun 30, 2008 | Audio Players & Recorders

1 Answer

Converting Cisco 7940 IP Phone to SIP


Unlocking a Cisco 7940

Method 1:
1) Unplug the phone
2) Plug the phone back in while holding the # key
The phone will soon display “Reset key sequence detected”
3) After several lights flash press the following keys in order:
1 2 3 4 5 6 7 8 9 * 0 #
4) The phone will then ask you if you want to save the network configurations:
Save network cfg? 1=yes 2=no
5) The phone will soon display “Factory reset initiated” and will continue
through the boot up process.
If that process fails to work for some reason there
is a second method.

Method 2

Complete these steps:
  1. Press Settings.
  2. The Network Configuration lock symbol must be unlocked. If not, exit to the main window and press ** # again.
  3. Press 3 on the keypad (or scroll down) for Network Configuration.
  4. Press 33 on the keypad (or scroll down) to Erase Configuration.
  5. Press the Yes softkey.
  6. Press the Save softkey.
The phone will now be reset.

Also see this link
http://www.cisco.com/univercd/cc/td/...tain.htm#93250

May 18, 2008 | Cisco 7910 IP Phone

2 Answers

Change home screen display


Press the * key to switch back to date and time. Also, the SHIFT button on top will change the STA EXT FEAT.

The only way I know of changing the name is in the main phone system.

Apr 23, 2008 | Panasonic KX-T7453 Corded Phone

Not finding what you are looking for?

Open Questions:

See all Cisco 7940 IP Phone Questions

Cisco 7940 IP Phone Logo

1,086 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cisco Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Gareth Tomlinson
Gareth Tomlinson

Level 2 Expert

116 Answers

Are you a Cisco Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...