Question about Kenmore Elite HE4 Electric Dryer

1 Answer

Kenmore Elite HE4 Gas Dryer panel lights up but will not start. When cycle is selected and start button is pushed, Two beeps and nothing happens.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

It appears your timer/main controller/CCU has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question(((())))

Posted on Sep 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pushed a button but dryer does not start, can not push any other


Hi,
There can be many reasons why your dryer2_bing.gif will not turn...

This tip that I wrote will help you to figure out what is happening...

Dryer2_bing.gif Repair - The Dryer2_bing.gif is not Turning
http://www.fixya.com/support/r4422207-dryer_repair_dryer_not_turning

Dryer2_bing.gif Repair ? The dryer will not start
http://www.fixya.com/support/r4460438-dryer_repair_dryer_will_not_start


heatman101

May 12, 2010 | Kenmore Elite HE4 Electric Dryer

1 Answer

Kenmore Elite HE4 gas dryer won't start


I had the same symptoms and it was a bad motor relay. This happened twice within 5 years.

Apr 19, 2010 | Kenmore Elite HE4 Electric Dryer

1 Answer

My kenmore elite he4 dryer-model#110.95087401 keep beeping and the end of cycle lights are going on from off to high and back to off right through the drying cycle.


I had the same problem and eventually none of the cycle buttons light up or the cycle time display. So it would not run at all. After taking it apart once and fiddling with the cycle push buttons, it worked for one load then would not work again. I could see 3 of the led faintly illuminated and unplugging and plugging back in the power changed nothing. Then I removed the plastic ring of cycle buttons that is between the panel circuit board and the outer plastic. (There a several layers to get to the ring.) Now I use a long allen wrench to push on the switch on the circuit board. I left the middle start button in place. That does not seem to cause a problem. Several loads now and still working. So it looks like the ring on plastic buttons don't release from the circuit board buttons causing a problem.

Feb 21, 2010 | Kenmore Elite HE4 Electric Dryer

1 Answer

Kenmore Gas Dryer HE4-Panel Switch is not Working


repl/ touch panel ,were the front push buttons are the whole assembly ,,

Dec 31, 2008 | Kenmore Elite HE4 Electric Dryer

1 Answer

HE4 dryer push buttonfor any cycle nothing happens


When you push start does it make a click sound. If so you might have a broken belt, or it may have fallen off. Unplug the dryer. Take off the bottom panel via 3 screws. Reach inside or look with a flash light to make sure the belt is on and has tension. Hope that helps. Dave www.washermd.com

Dec 16, 2008 | Kenmore Elite HE4 Electric Dryer

1 Answer

Kenmore Elite HE3 Dryer (3 yrs. old)


when u push the buttons do all lights light up if so ,, machine is in lock mode ,, press and hold the little icon that read lock for about 3 seconds unitll lights are off then run ,, let see

Nov 19, 2008 | Kenmore Elite HE4 Electric Dryer

1 Answer

Kenmore elite HE4 dryer 3 rapid beeps when pressing start button


the machine is in lock mode made for children in mind so that they do not touch any cycle while on,, look for lock icon hold 3 seconds and u will hear beep and that its it u r done ,,,,

Oct 20, 2008 | Kenmore Elite HE4 Electric Dryer

2 Answers

Kenmore Elite HE4 beeps three times when start panel is pressed and wont turn on


FWIW ... the Sears guy came by yesterday. The problem was apparently that the door latch was not operating to the extent that the sensors thought the door was open. He is replacing the latch next week. He adjusted the old one in the mean tiome and it appears to be working fine.

This kind of stunned me, since my wife reported an electric zap and the interior light burned out as the dryer went dead -- so I was sure it would be a fried circuit board -- but, no, a little jiggling of the latch seemed to clear it up....

Jun 24, 2008 | Kenmore Elite HE4 Electric Dryer

1 Answer

Cycle Signal Beeping


The user interface button panel has failed and will need to be replaced.

Apr 19, 2008 | Kenmore Elite HE4 Electric Dryer

1 Answer

HE4 Elite dryer beeps


The Thermal fuse is most likely the problem.

Nov 27, 2007 | Kenmore Elite HE4 Electric Dryer

Not finding what you are looking for?
Kenmore Elite HE4 Electric Dryer Logo

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2286 Answers

Tim Whalen

Level 3 Expert

3074 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...