Why does my DTC 400 fargo printer, when first starting to use it, print bad cards (BLACK) or cause the tape to stick to the card. After printing several cards it will start working correctly.
I have a DTC400. Had worked fine until recently. Message repeatedly = "Panel Searching Printing...
(More)
I have a DTC400. Had worked fine until recently. Message repeatedly = "Panel Searching Printing Cyan" It would seem the printer never finds the Cyan. However, the printer supplies are 1/4 full. I've run the diagnostics in it & only had a problem with Calibrating the Ribbon sensor - I got the message that it failed & to resend the command. So as it stands now, I cannot print any ID cards. Any ideas? Thanks!
I have a DTC400 which prints fine but does not eject the card completely. I have to physically...
(More)
I have a DTC400 which prints fine but does not eject the card completely. I have to physically remove each card after it has finished printing. The size cards that I am using are 5.40cm x 8.55cm. The printer is set to use CR-80 sized cards.
Printer breaks ribbon. What can cause this problem? How can I obtain troubleshooting info? Is there...
(More)
Printer breaks ribbon. What can cause this problem? How can I obtain troubleshooting info? Is there a repair shop in SF bay area?