No backlight on my n95

Take the front cover off again. Make sure the screen sits properly into place. Put the covers back on and try to power on the phone.

If you are not having light on your nokia n95, then it means the florescent tube of your is bad, the solution is for you to replace the screen of the phone. To replace the screen of the phone, follow the steps below:

1. First remove the battery cover, battery and memory card. Move the slider down and remove the two screws you see.
2. Now move the slider up and remove the two screws at the top of the phone,
3. Run your fingernail along the edge of the join of the front cover to unclip it.
4. You should now have the front cover removed. The keypad should be loose as well.
5. Flip the keypad part back to access the ribbon which connects the LCD to the phone.
6. To remove the ribbon, flip back the metal hinge and then simply pull the screen back and the ribbon will be released.
7. Pull the LCD in the direction like you are sliding the screen up.
8. Your phone should look like below and you can replace the LCD.
9. Reverse the whole procedure for reassembly.

If you are not familiar with such technical activity, i will suggest you ask a friend who is familiar with it to assist you in carrying out the job.
Hope this information helped.

Hello,

to get to the screen of your phone, follow the process below:

First remove the battery cover, battery and memory card. Move the slider down and remove the two screws you see.
Now move the slider up and remove the two screws at the top of the phone.
Run your fingernail along the edge of the join of the front cover to unclip it.
You should now have the front cover removed. The keypad should be loose as well
Flip the keypad part back to access the ribbon which connects the LCD to the phone.
To remove the ribbon, flip back the metal hinge and then simply pull the screen back and the ribbon will be released.
Pull the LCD in the direction shown.

Take care

To remove the slider mechanism, take out the 4 visible screws first (under the battery cover). Then on the back of the phone at the bottom, remove the 2 little rubber circles with a tiny flat head screwdriver to reveal 2 more screws, take those out. Take out the 2 screws on either side of the flex cable that is coming out just below the battery compartment. Next is the part that took me hours to figure out. L Beneath where the battery sits is a long oval shaped thing (=======) <- looks something like that (sorry I don't have pictures). This is actually a sticker. Peel this up and remove the 2 screws under it (keep the sticker intact becase you will need to replace it later). This will detach the slider from the phone. Make sure to gently disconnect the flex cable from the mainboard first.

From there you can see more screws that will help you take apart the sliding part of the phone to access the lcd screen if you need to replace it (which is what I was doing). It's pretty easy from there to get everything else apart. Make sure when you disconnect the cables from the back of the LCD screen, that you flip up the little release tabs on the connectors first.

there is dim light on the screne

it's you flex, the ribbon that connects your board and lcd.. it maybe lifted... or you have to change the flex if there's a cut.. bring it to the center to replace or re attach it could be loose too...

i think it sort of hardware problem, like slider sensor s not working, u shuld take it back frm wer u got it repaired to fix that problem
shuweb

you need a new ribbon souds like your torn it

how do i change that coil and where can i get another one
???????????????????????????????????????????????