Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Loud Noise during spin cycle

Occasionaly loud noise during spin cycle. Sounds like a metal bolt, nuts, etc. banging against the drum.

Posted by on

  • 5 more comments 
  • Anonymous Mar 15, 2014

    Very noisey sounds during spin cycle

  • Anonymous Mar 18, 2014

    When on the spin part of the cycle, washing machine giving a very loud banging noise

  • Anonymous Mar 20, 2014

    Loud banging noise in spin mode. No leaking observed.

  • Anonymous Mar 23, 2014

    loud noise in spin

  • Anonymous Mar 23, 2014

    extremely loud in spin cycle

  • Anonymous Mar 25, 2014

    DURING THE SPIN CYCLE IT A LOUD NOISE AND SHOWS UNLEVEL.

  • Anonymous Mar 29, 2014

    clunking noise during spin cycle and will not spin

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 249 Answers

Drum bearings are gone,it would cost too much to repair,the drum shaft would to be repalced as well.Sorry

Posted on Dec 17, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Loud banging noise Kenmore model # 41744102301


Hello,washing machine is mounted on two supports, if it is damaged first which is where the engine so both need to be replaced because they wear out. If you're just a little handy so you know it himself .Ak you order parts so precisely that type because they are different .

May 02, 2013 | Washing Machines

1 Answer

Loud noise during spin cycle now they are stacked


a loud noise comes when you forget to remove shipping bolts after installation or if the shocks are worn out it makes noise thirdly the bearings might be worn out if the washer is more than 6years old

Jan 21, 2013 | LG Cherry Red Steamwasher Wm2487h Front...

1 Answer

Washer making loud noise and wont spin


Check and see if the inner drum is loose and floppy.if it is, it's likely the bearings have collapsed, and require replacement...If the drum feels stiff and tight, it could be that something is jammed between the inner and outer drums. Both situations could be costly...Get quotes....Good luck...Nomess

May 22, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Loud banging noise during rinse


Most noises from a washing machine occur during the rinse or spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary.This will solve your problem.

Apr 08, 2010 | Whirlpool GHW9100L Front Load Washer

3 Answers

Loud banging noise during washing cycle. Sounds like agitator is slipping,then banging. No noise during spinning cycles.


Grab the agitator at the base and attempt to rotate it clockwise and counter clock wise. It should remain firmly in place. If there is movement the agitator spline is worn.

This is your Agitator:

http://www.repairclinic.com/Appliance-Parts?s=t-WBSR3140DW-%3d%3dc201

It does not come with the fabric dispenser. It has to be ordered seperately. You should be able to transfer you old one to the new one if you do have to replace the agitator.

Besides the agitator the drive bell can also be the source of the noise. It is located under the agitator.

http://www.repairclinic.com/SSPartDetail.aspx?s=t-WBSR3140DW-%3d%3dc239i1195917&PartID=1195917

This part is the most likely cause of the noise.

Thanks for using FixYa.

Kelly

Mar 07, 2010 | GE WBSR3140DW Top Load Washer

1 Answer

GE WSXH208A makes a lound noise during the spin


check to see if the washer is balanced (cloths are evenly placed in drum) if it sounds like banging noise

Jan 20, 2010 | Washing Machines

1 Answer

Wfw8300sw01 - makes loud noise sounds during spin


The bearings have collapesd due to the seal going faulty. If bearings can be accessed to from the outside, it is possible you could do the repair. If big bearing and seal is accessed from the inside, suggest tech. do it as it gets dirty and a lot more complex.

Sep 20, 2009 | Washing Machines

2 Answers

Very loud rumbling noise during spinning


Most noises from a washing machine occur during the spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary.This will solve your problem.

Sep 05, 2009 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

Maytag Epic Z Washer has object between drum and tub.


did you ever find out how to separate the tub and basket on your maytag washer? I have exactly the same problem.

Jun 23, 2009 | Maytag EPIC MFW9700S Front Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

3,172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

prem mathew

Level 3 Expert

662 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...