Question about Kitchen Ranges

2 Answers

Rangemaster Toledo 110 oven/Grill element

I have recently replaced the oven/grill element as the old one failed. The grill part of the new element works but the oven part of the element does not heat up. I noticed on fitting that there are only 3 wires to the 4 connections. Could it be because of this? I t means that this oven relies on the base element to heat up so never reaches a very high temperature.
Please help!!

Posted by on

  • peter dykes Dec 30, 2008

    Any answers yet i am hoping to do same thing Ta Peter

  • Anonymous Mar 21, 2014

    tecnik double oven TKC850 double oven brown need a top oven element

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hi,

How easy is it to fit a new grill element. The element on the left hand side of the grill is not working so I need to replace this. I'm just wondering if this is easy to do myself or do I need an
electrician
?
Regards
Sandra

Posted on Jan 17, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Do anybody no where i can get a grill element for a bush cooker ( ae56sw ).or one that will fit my cooker..........

Posted on Jan 29, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, I have a Rangemaster 110 (electric double oven), which has a double grill. Unfortunately one half of the grill has blown - not working. Is it easy to repair? Thanks a lot - Krisztina


Usually fairly straight forward. Remove the blown element being careful not to loose the wires into the void behind the grill. Insert new element making sure the orientation and wires are conected as the original was.

Dec 28, 2010 | Rangemaster Range Cookers Kitchener 110...

1 Answer

Grill element not working on rangemaster 110


If grill element not working, switch power off and remove back panel to gain access to wiring. Grill element will be toy element. look for any burnt wire, either blue or brown. Re attach where broken and reassemble. If you have any doubts call a technician. Not to difficult though.

Jun 05, 2010 | Rangemaster 110 (Dual Fuel) Dual Fuel...

1 Answer

The convection oven of my 110 electric cooker is not coming to temperature, the element goes red eventually when on the grill symbol.


conventional cooking uses the outer/grill element plus there is one under the base of the liner to radiate heat upwards... if the top element is heating then the lower element is faulty thats why it never gets to temperature...

Nov 04, 2009 | Rangemaster Classic 110 Kitchen Range

1 Answer

Hi - I have a creda solarplus cooker (48349) - I wish to replace the 8 bar grill element with a 4 bar grill element - can you please advise me of the steps necessary to do same - yours michael clancy


It’s basically as simple as:

Turn off the gas supply to the range.
Turning off the mains power to the range.
Remove the back panel behind the grill.
Remove the 2 power connectors to the grill element.
Remove the earthing wire to the element screw terminal.
Unscrew the grill element securing screws(s) - there will be 1 or 2 depending on the element fitted to your range.
Refit the new element (make sure it has the same mounting screw holes as the one you want to remove) then secure it.
Reconnect the earthing wire to the element screw post.
Make sure that neither of the element tags touch the chassis - check with a continuity tester of ohm meter and adjust if required.
Reconnect the power cables to the element.
Reconnect the power and check that the element works correctly.
Disconnect the mains power again and replace the rear panel(s).
Reconnect the mains power and recheck that the grill functions correctly.
Turn on the gas supply.

Oct 05, 2009 | Rangemaster Toledo 110 (Dual Fuel) Dual...

1 Answer

Grill Element Blown Rangemaster Classic 110


I have the same problem. The installation and service guide details how to change the grill element but does anyone know what the part number is for the grill element?

Apr 01, 2009 | Rangemaster 110 (Gas) Kitchen Range

2 Answers

Rangemaster gas grill - little or no gas pressure


you can phone rangemaster helpline on 08707 895 107 spare parts or tech team.

Feb 26, 2009 | Rangemaster 110 (Gas) Kitchen Range

1 Answer

Only half the grill is working


There are two elements on the grill, left and right. One has failed and needs replacing. Can't tell you how, we haven't got that far, but we bought replacements from e-Bay £9.99 each + £2.50 P+P. Official suppliers charge £21+.

Beth

Mar 15, 2008 | Rangemaster Classic 90 (Electric) Kitchen...

3 Answers

Cant cook in the oven! Gas Rangemaster double oven 110


Sounds like the oven ignitor is weak and not building up enough resistance to get gas flow.  I would replace the ignitor.

Oct 16, 2007 | Rangemaster Classic 110 (Dual Fuel) Dual...

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

1,381 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Oloyede Monsuru

Level 3 Expert

1417 Answers

Marvin
Marvin

Level 3 Expert

83096 Answers

Paul Carew

Level 3 Expert

3351 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...