Question about Nintendo 64 Console

2 Answers

New to the 64 got on ebay iam #%@*% confused it doesnt work

Power is no problem/ the red,white and yellow inputs are proper but all I get on my screen is "searching for signal" The female end fo the input cable does fit loosly into the back of the console. Is that ok for these units?

Posted by on

  • danell Dec 31, 2007

    We have a nintendo 64 it was working fine and we shut it off and went
    back 40 minutes later and went to play again and the power will come on
    but the TV says searching for signal or that there is no signal.
    We have the yellow, red, and white cables hooked up and the light on
    the nintendo is on . Is there something wrong with the cables on
    the back or anything that we can try. Thanks


×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

If its using red,white,yellow then it should show up on the av channel on your tv. the button on the remote looks like abox or circle with an arrow pointing into it.

Posted on Dec 23, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Well I haven't played the 64 in years, but everything should fit tightly.

Posted on Dec 15, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My n 64 has audio but no video


These steps work for Wii, Nintendo GameCube, Nintendo 64, and Super NES hookups.

Gently pull the yellow cable of the Stereo AV cable apart from the two Audio cables (red & white). Plug the yellow cable into the Video Input on the TV or VCR.
Locate an open set of Audio inputs (left & right) on your home stereo. Do NOT use inputs marked "Phono."
Plug the white cable into the Audio Left input on your home stereo. Plug the red cable into the Audio Right input on your home stereo.
Set the input select on the stereo system to match the label on the set of audio inputs. (For example, if you plugged the Audio cables into the AUX port, switch the stereo to AUX or "auxilliary."
Make sure the game is placed properly in the system.
Plug the controller(s) into the front of the Control Deck using the left most port for player one.
Plug the AC Adapter into the back of the system. Plug the other end into a wall outlet.
Turn the power on.
Turn on the TV or VCR and locate the input select. It's often called Input Select, AUX (auxilary), Line, Line In, Input, Source, Select, In, or EXT (external. Switch the input select to show the Nintendo game.
Note: If you are using a VCR, you will need to set the VCR's TV/VCR button to VCR. You can do this by putting a movie in the VCR, pressing play, then pressing stop.

The game image should now be displayed on the screen. You're ready to play.

Dec 25, 2012 | Nintendo 64 Console

1 Answer

Trying to hook up my nintendo 64 but there is no video or sound output??


External Speakers



Installation steps:
These steps work for Wii, Nintendo GameCube, Nintendo 64, and Super NES hookups.

Gently pull the yellow cable of the Stereo AV cable apart from the two Audio cables (red & white). Plug the yellow cable into the Video Input on the TV or VCR.
Locate an open set of Audio inputs (left & right) on your home stereo. Do NOT use inputs marked "Phono."
Plug the white cable into the Audio Left input on your home stereo. Plug the red cable into the Audio Right input on your home stereo.
Set the input select on the stereo system to match the label on the set of audio inputs. (For example, if you plugged the Audio cables into the AUX port, switch the stereo to AUX or "auxilliary."
Make sure the game is placed properly in the system.
Plug the controller(s) into the front of the Control Deck using the left most port for player one.
Plug the AC Adapter into the back of the system. Plug the other end into a wall outlet.
Turn the power on.
Turn on the TV or VCR and locate the input select. It's often called Input Select, AUX (auxilary), Line, Line In, Input, Source, Select, In, or EXT (external. Switch the input select to show the Nintendo game.
Note: If you are using a VCR, you will need to set the VCR's TV/VCR button to VCR. You can do this by putting a movie in the VCR, pressing play, then pressing stop.

The game image should now be displayed on the screen. You're ready to play.

Feb 10, 2011 | Nintendo 64 Console

1 Answer

Wii powers up doesnt have a picture or sound tv screen.


    • With the yellow, white, and red AV cables that came with your system:

      • Did you have to use the red/green/blue inputs on your TV because it doesn't have the standard (yellow) AV inputs? If so,click here for complete information on doing this type of hook up.

      • If this is your first time hooking up the Wii console or have you moved it to another TV, please click here to review our step-by-step connection guide. Our experience shows that many times this issue can be solved by double-checking your connection and finding the correct Input Select for your TV or VCR.


    • With the blue, green, white, and red component cables (sold separately):

      • Review our step-by-step Wii Component Cable connection guide to make sure the cables are properly inserted and that your TV is set to the proper input.

    If you have verified the connection is correct, and are still receiving a blank or black and white screen when powering on your Wii console, then the problem is likely with the system and it will need to be repaired. Please call 1-800-255-3700

Dec 29, 2010 | Nintendo Wii Console

1 Answer

I just got a nintendo 64, and I can't figure out how to get it work on my flat screen. It's a sony, and its an hdtv. The nintendo came with the three wire cable (Red, White, Yellow) and I've tried plugging...


You need to have a regular RCA input for the N64 A/V cable. Neither component or HDMI will work with the N64's RCAs. Almost all TVs still have RCA inputs on them. Look on you television for a set of three inputs (yellow, red, white). If your TV does not have these inputs, you cannot use an N64 with it.

Nov 16, 2010 | Nintendo 64 Console

1 Answer

How can an old vcr analog connect to a new digital tv


Although the TV is digital, the market has not dumped the analog compatibility (yet). You can connect your VCR through the RF input, using channel 2, 3 or 4 (depending on your VCR) to view your video collection. Or, you can connect your VCR by RCA cables to the composite video input. Most TVs now have only 1 or 2 composite inputs (Yellow, White, Red). They are sometimes shared, serving as a component input as well (Green, Blue, Red, White, Red). For these TVs, you will notice a yellow circle or some other marking around the Green connection indicating that it is also a composite input. When connecting to such an input, remember to connect the white (and red if your VCR has one) to the white (again, red applies) to the audio input jacks of this video input. I hope this was of some assistance and not too confusing.

Mar 23, 2010 | Panasonic PV-DF2704 27 in. TV/VCR/DVD...

2 Answers

Can't not get our Nintendo 64 to work on our new Bravia TV


The Nintendo 64 sends out a signal that can only be properly decoded by old CRT TV's

Those Bravia TV's are the God's TV's even if they did work on it I wouldn't recommend it because it would most definitely eventually ruin the life span of your TV.

But to answer your Question the Cables should be plugged into AV1 which is the Red White and Yellow Connections

Nov 22, 2009 | Nintendo 64 Console

2 Answers

I'm confused how to connect my DVD player with the TV. which cables connect where. I dont have a user manual.


Mukhhe,

good day,to connect your DVD to TV screen follow this steps.

1) prepare your RCA cable ( 3 colored cable yellow/red/white)
note: always remember this

yellow = video
red and white = Audio (left and right)

2) at the back or front display of your TV screen you'll see RCA socket marked as "AV1 input" "AV2 input" etc... if your screen is only mono sound you can only see two sockets Yellow=video white= audio

3) at the back of your DVD player connect the RCA cable following the color code yellow to yellow white to white and red to red. after you connect the cable to your dvd player now connect the other end of thr RCA to your TV screen input.

make sure you'll connect it to "A/V input" not "A/V out" then after connecting all the cables, from the remote commander of your TV screen press a button indicating "A/V" some mark as "TV/AV" press this button until your screen display the back ground display of your DVD player.

cheers,
mark

Jan 30, 2009 | Spectroniq PDV-70X

1 Answer

Im trying to get my nintendo 64 to work on my avic d3. i know i need a power inverter, what else do i need? also, do you know where the red white and yellow plugs from the nintendo 64 goes into the d3?


the red white yellow wires plug into the rear of the unit (white and red RCA will go into video or aux input) the yellow wire will go into video in (the red and white RCA from Nintendo they can go into either video 1input or aux input) on back of in-dash unit
hope this helped

Dec 15, 2008 | Pioneer AVIC-D2 In-dash Car Audio Stereo...

Not finding what you are looking for?
Nintendo 64 Console Logo

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Consoles & Games Experts

Raj Patel

Level 3 Expert

917 Answers

Julian Wainwright

Level 2 Expert

64 Answers

Zhenya Ogorodnikov

Level 2 Expert

218 Answers

Are you a Nintendo Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...