Question about Acer Al2416WD LCD Monitor

1 Answer

No Signal? Recently (today), when I turned the computer on, the screen comes up black with the "No Signal" message in the center.  The cords are all right it appears, but I can't see anything.  Is this a hardware or a monitor problem and how should I fix it?

Posted by on

  • Shanks13 Dec 15, 2007

    Also note that I'm not absolutely great with technology. I can understand the general stuff, and the complex some if it is explained well.

  • Shanks13 Dec 15, 2007

    Alright. Thanks for the info, but how do I get the connection or the network working again?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 383 Answers

Loss Of Signal - LOS Short for Loss Of Signal, LOS is generally an indicator on a networking device to ... has no connection on the other end, network is improperly configured

Good Luck, This should get your signal back again for ya.

Please dont for get to Vote.Thank you.

Posted on Dec 15, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Touchsmart tx2z Screen Flickers and Freezes


it seems the touch part is off center because when i touch the screen it reacts one finger over

Jul 09, 2010 | HP TouchSmart tx2z

1 Answer

Monitor screen begins as computer is booting up and then screen goes black. Message says there is no signal.


If the power light dims or changes color after the no signal message comes up, that means the monitor went to sleep.
While the monitor is plugged in and on and the computer is also on, Try unplugging the VGA cable from the monitor. wait 30 seconds and then plug it back in o see if the power button light comes back to normal color and the screen flashes on.
If not, then the monitor is not getting a signal from the computer.
If using a desktop computer,Try a different cord or try the monitor on another computer.
If using a laptop, you need to activate the laptop to use an external monitor. That can be done through the display settings, OR, most laptops have a shortcut key feature which usually involves pushing the Fn key and one of the F keys at the same time. The F key may say CRT/lcd or have a picture of a monitor and a screen.
If the power light does light back up and still no picture, There may be an internal issue on the monitor

Nov 17, 2009 | ViewSonic VG2230WM LCD Monitor

1 Answer

Screen saver displaying unwanted message


This happens on monitors with a sleep type function. Make sure that the sleep mode is turned off and that it is set to never turn off inside of windows. Then the no signal error should not come on again.

Sep 07, 2009 | Computers & Internet

2 Answers

Computer monitor screen stays black


please check the signal cable..... sometimes the signal cable gets faulty and it would be best if you replace it..

Jun 02, 2009 | LG Flatron L1710S 17" LCD Monitor

2 Answers

Sampo Flat Screen Black unless unplug and plug back in


i had the same problem now my monitor wont even turn on if i do that the power light just keeps blinking maybe its a sign of a dying monitor

Jan 16, 2009 | Sampo PD-70 15" Flat Panel LCD Monitor

2 Answers

No Signal message displaying after screen goes black


Try loading drivers for the LCD monitor.Right click empty part of desktop>>Properties>> settings It should show monitor name instead of plug and play monitor on ---- Video board.Go to Advanced>monitor>driver on this screen.
Samir

May 06, 2008 | Acer AL2017 20" LCD Monitor

1 Answer

Repairing Loss of Signal


every possibility that the graphic card has failed or if you do not have a separate graphics card , that the mother board is failing

Mar 15, 2017 | Acer Al2416WD LCD Monitor

Not finding what you are looking for?
Acer Al2416WD LCD Monitor Logo

Related Topics:

643 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

645 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...