Question about Kodak Easyshare M753 Digital Camera
Your digital image sensor is bad. It sits on the back of the lense and will show lines before it goes black. You have to have it repaired. There are some repair services on e-bay that are cheap and helpfull
Posted on Apr 28, 2009
That is probably a faulty digital sensor array.
Try taking a picture and transferring the picture on a computer. If the picture on the computer is fine , then it is a faulty LCD.
If the picture is purple and blurred, the digital sensor array or the control board is defective.
The digital sensor array is the light sensible sensor chip that take the picture.
On a small camera like this can be a difficult and expensive repair.
Contact the phone number listed on the user manual and ask a quote for the repair, or ask if a warranty extension is available.
Posted on Dec 07, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
One or more causes may result in unclear (blurry) pictures. Some common causes and suggested solutions are listed below. The lens is dirty. Clean the lens according to the guidelines for your camera model. The subject was too close to the camera. Make sure that you are far enough away from your subject. Each camera model has recommended distances for normal, telephoto (zoom), wide-angle, and close-up pictures. The subject was farther than the effective range of the flash. Each camera model has an effective flash range. The camera did not autofocus or autoexpose the picture correctly. For best Autofocus/Autoexposure function, press the shutter button halfway down and hold. When the AF/AE Indicator (Ready Light on some cameras) turns green, press the shutter button the rest of the way down to take the picture. If the yellow light blinks, release the shutter button. (On some models, the light will also blink yellow if the shutter speed is too slow.) You did not use the LCD screen Preview feature to take a picture in Close-Up mode. When the camera is in Close-Up mode, always use the Preview feature, both to confirm focus and to aim the camera properly. If you do not do this, the viewfinder will not show you an accurate view of the picture because of parallax error. The subject or camera moved while you took the picture. Place the camera on a flat, stable surface, and hold the camera very steady. Or use a copy stand or tripod – especially advisable at telephoto or high-zoom settings, or in low light.
Posted on Aug 29, 2005
Tips for a great answer:
Jun 01, 2013 | Vivitar ViviCam X029 Digital Camera
Apr 03, 2010 | Casio EXILIM ZOOM EX-Z60 Digital Camera
Jul 13, 2009 | Samsung S860 Digital Camera
May 03, 2009 | Olympus SP-560 UZ Digital Camera
Apr 27, 2008 | Cameras
564 people viewed this question
Usually answered in minutes!