the auger and associated parts all work manually. There are no clogs in the water line, the ice maker works fine. Is the problem the dispenser motor or something else.
If you take the ice bin out and gain access to the motor by removing the cover over the motor area you can check for voltage to the motor when you try the dispenser switch. If it's not getting voltage the switch is bad. If it gets voltage but don't turn or if it bogs down easily the the motor is bad.
Was this helpful?
Yes
No
Popular Solutions for Kenmore Elite HE3 Steam? 8674
Kenmore Elite He3 Model #11092824100 Dryer is no longer heating. Checked vent for airflow , good...
(More)
Kenmore Elite He3 Model #11092824100 Dryer is no longer heating. Checked vent for airflow , good airflow. No error codes on display. How do I access the internal components. (Front or Back)? Is there access through the front of the dryer? Very difficult to move dryer with washer side by side in small laundry room. Igniter? Heating coil?
I have a Kenmore HE3 - 82824102. No lights on control panel but interior light comes on when you...
(More)
I have a Kenmore HE3 - 82824102. No lights on control panel but interior light comes on when you open the door. Any idea?