Polaroid TDS-03211C 32in LCD TV/DVD Combo

what were you cap values on the power supply thet you replaced?

Please use the following link for a possible repair....

http://www.ohmsupplies.co.uk/epages/62027733.sf/en_AU/?ObjectPath=/Shops/62027733/Products/REP76

no power scott hdtv

Not worth repairing,just get a seperate DVD player hook to the tv.It very cheap these day.

I have a working DVD unit from my 03211c and I part with it for $30.00 you pay the postage. This DVD Polaroid TDA-03211C DVD MECH 926-V00-DSL900Dhas no markings but was built into my 03211c in June of 07.
cell: 1-717-781-7907
I also have anything else you you need for his TV. I'm parting it out because the LCD screen is cracked.

sounds like inverter board. What it sounds like is happing is your LCD is working ut the backligkt board that allows you to see is kicking off. (as you still have sound) Which could be the (most likely) inverter board, or the power supply board. You can take apart and check for voltage at your power supply. The power supply has a pigtail with large white wires and a connector. Power up with the center back cover off and check your voltage at the white connector on the power supply before and after the screen gos out. If there is no large voltage loss it is your inverter board.

You can used boards on e-bay or
www.rns-systems.com

read here
http://www.fixya.com/support/t225581-code_polaroid_tv

did u get if fixed and if so can u help me i got the same problem e mail me at [email protected]

two options _bad backlight inverter or the main board ;eed to be change.

i had this but i had the extended warranty they put in a new optical sensor(laser. ) But they also scratched and dented my tv like garbage when they fixed it. I am getting a lawyer