Question about Panasonic Lumix DMC-FZ20 Digital Camera

1 Answer

When powered on, message comes up...

When camera is powered on, message says, "please turn camera off than on again. When I do, same message appears...What can I do?

Hankdewald@gmail.com

Posted by on

  • 5 more comments 
  • Anonymous May 05, 2008

    please turn camera off than on again. When I do, same message appears...What can I do?
    Panasonic Lumix DMC-FZ20 Digital Camera

  • Anonymous May 05, 2008

    "please turn camera off than on again. When I do, same message appears...

  • Anonymous May 05, 2008

    "please turn camera off than on again. When I do, same message appears...What can I do? Panasonic Lumix DMC-FZ20 Digital Camera

  • Tran Trong Khoi Jun 08, 2008

    I got the same problem... i turned on my camera.. and it said : "please turn camera off and then on again.."

    what to doo?

  • Tran Trong Khoi Jun 08, 2008

    Yeah i got the same problem.. i turned on the camera and it said : "Please turn camera off and then on again.."

    What can i doo???

  • missdaryn Jul 01, 2008

    i have the same problem and it doesnt seem to help when i put pressure on the lens.




    ANother option?

  • Tran Trong Khoi Jul 27, 2008

    hmm the lens actually open when i turn it on but the message still appears..

    and when i turn if offf, the lens doesnt close...

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

The lens can not move due to a possible obstruction.

Gently put some force on the lens, turn the camera on and it works. I suppose there is too much friction between lens and camera.

Best regards from Holland!

www.SemafoonWinkel.nl

Posted on Jan 18, 2008

  • P2000Pager Jan 18, 2008

    This problem occured here today (18-jan-08), I bought the camera 2,5 years ago. Problem is now solved.



    Best regards from Holland!



    www.SemafoonWinkel.nl

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Not working always show "turn thepower off and on


I'm sorry that the Camera is displaying the error message. "TURN THE POWER OFF AND ON AGAIN" displays on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset. Please follow the below steps to perform a power reset.


·Turn off the camera.
·Remove the battery pack.
·Press and hold the power button for 30 seconds.
·Allow the camera to remain without power for 60 seconds.
·Reinsert the battery pack.
·Turn on the camera.



Also try initializing the Camera if you're able to access the Menu items on the Camera. The Initialize option will be available underSetup or Main settings Sub Menus.

If the issue persists again, service is required. Pleaseclick hearto locate the service center near your area.

Thanks for understanding. Please let me know if your require any clarifications.

Aug 01, 2011 | Sony Cybershot DSCW310 Digital Camera

2 Answers

Sony cybershot dsc-w290 after a recent dropping of the camera when we turned it back on we get this message "turn the power off and on again" same thing happens each time.


I'm sorry that the Camera is displaying the error message. "TURN THE POWER OFF AND ON AGAIN" displays on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset. Please follow the below steps to perform a power reset.



·Turn off the camera.
·Remove the battery pack.
·Press and hold the power button for 30 seconds.
·Allow the camera to remain without power for 60 seconds.
·Reinsert the battery pack.
·Turn on the camera.

Also try initializing the Cameraif you're able to access the Menu items on the Camera. The Initialize option will be available underSetup or Main settings Sub Menus.
If the issue persists again, service is required. Please click hear to locate the service center near your area.

Thanks for understanding. Please let me know if your require any clarifications.

Jun 16, 2011 | Cameras

1 Answer

My camera displays "turn the


I'm sorry that the Camera is displaying the error message. "TURN THE POWER OFF AND ON AGAIN" displays on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset. Please follow the below steps to perform a power reset.



·Turn off the camera.
·Remove the battery pack.
·Press and hold the power button for 30 seconds.
·Allow the camera to remain without power for 60 seconds.
·Reinsert the battery pack.
·Turn on the camera.


Also try initializing the Cameraif you're able to access the Menu items on the Camera. The Initialize option will be available underSetup or Main settings Sub Menus.
If the issue persists again, service is required. Pleaseclick hearto locate the service center near your area.

Thanks for understanding. Please let me know if your require any clarifications.

Jun 10, 2011 | Sony Cyber-shot DSC-W70 Digital Camera

1 Answer

My sony Camera (DSC -W110) is showing "Turn the power off and on again" while switch on the camera,it appers again & again after switching the camera on and off


I'm sorry that the Camera is displaying the error message. "TURN THE POWER OFF AND ON AGAIN" displays on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset. Please follow the below steps to perform a power reset.





· Turn off the camera.

· Remove the battery pack.

· Press and hold the power button for 30 seconds.

· Allow the camera to remain without power for 60 seconds.

· Reinsert the battery pack.

· Turn on the camera.




Also tryinitializing the Cameraif you're able to access the Menu items on the Camera. The Initialize option will be available under Setup or Main settingsSub Menus.

If the issue persists again, service is required. Please click hear to locate the service center near your area.

Thanks for understanding. Please let me know if your require any clarifications.

Mar 21, 2011 | Sony Cyber-shot DSC-W110 Digital Camera

1 Answer

Have a Sony Cybershot DSC-W90 camera. After turning camera on, get message stating "turn power off and on again." Same message over and over again.


For these few days i have saw users asked this problem here again and again. Come to see my article in my blog, Maybe it will help: turn the power off and on again maybe something will helpful

Jan 04, 2011 | Sony Cyber-shot DSC-W90 Digital Camera

1 Answer

My lens does not retract when i turn the power off. When i turn it on again the message 'turn power off then on again' keeps coming. what can i do


Hi,


Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset and Initialize option.

Performing a manual power reset

Turn off the camera.

Remove the battery pack.

Press and hold the power button for 30 seconds.

Allow the camera to remain without power for 60 seconds.

Reinsert the battery pack.

Turn on the camera.

To reset the Camera back to factory default, select the INITIALIZE Option from the Main Settings 1 Menu of the Camera to OK.This will set the user defined settings back to factory default. The images and videos will not get deleted.


If the issue persists, service may be required.


Thanks for contacting FixYa.

Dec 13, 2010 | Sony Cyber-shot DSC-H10/B Digital Camera

1 Answer

Message "turn power off and on again"


Your camera has dirt in the lens, you need to get someone to take camera apart and clean it. This is very difficult to do if you dont have any knowledge of cameras. You could send to sony, they will repair, around $95 plus shipping. Kind of expensive. Cheaper to buy new camera. But you have nothing to loose by trying to take apart clean and lube lens.

Jun 18, 2009 | Sony Cyber-shot DSC-H50 Digital Camera

1 Answer

'Please turn camera off and then on again'


The barrel is defect inside,dit it fall on the lens? A new barrel will cost about 175 euro.

Jun 07, 2009 | Panasonic Lumix DMC-TZ3 Digital Camera

1 Answer

SONY DSC-S600


If you are able to access the MENU option, then try to initilize the camera by following the steps mentioned below:

Please press MENU to display the menu items.
Please go to the SETUP menu and select the SETUP 1 option of the Camera.
You would see the intialize option.

Thanks

Aug 24, 2008 | Sony Cyber-shot DSC-S600 Digital Camera

1 Answer

Software problem


I'm sorry that the Camera is displaying the error message. "TURN THE POWER OFF AND ON AGAIN" displays on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset. Please follow the below steps to perform a power reset.
  • Turn off the camera.
  • Remove the battery pack.
  • Press and hold the power button for 30 seconds.
  • Allow the camera to remain without power for 60 seconds.
  • Reinsert the battery pack.
  • Turn on the camera.

Also try initializing the Camera if you're able to access the Menu items on the Camera. The Initialize option will be available under Setup or Main settings Sub Menus.


If the issue persists again, service is required. Please click hear to locate the service center near your area.

Thanks for understanding. Please let me know if your require any further assistance.

Jun 23, 2008 | Sony Cyber-shot DSC-N1 Digital Camera

Not finding what you are looking for?
Panasonic Lumix DMC-FZ20 Digital Camera Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Cameras Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

75283 Answers

Computer Links

Level 3 Expert

2386 Answers

Are you a Panasonic Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...