I have the mini fridge and i have only had it for 7 months and it just now shuts off, but if i leave it unplugged for like ten minutes it turns back on but only for another ten minutes or so and then shuts off again. I don't hear anything out of the ordinary, what could it be and is it worth fixing?
Fisher & Paykel bar fridge does not get cold, compressor runs for about 2 minutes and gets...
(More)
Fisher & Paykel bar fridge does not get cold, compressor runs for about 2 minutes and gets very hot before stopping (it has thermal protection). Could it be that the gas has leaked out? Is it possible to test the gas pressure as there isn't a connection to connect any gauges to.
light is flickering and there is no cooling air that you can feel. How do I get the light to stop...
(More)
light is flickering and there is no cooling air that you can feel. How do I get the light to stop flickering?
Robotek, just wanted to let you know that these fridges are not the compressor type. They use a...
(More)
Robotek, just wanted to let you know that these fridges are not the compressor type. They use a TEC1-12706 thermo-electric chip that pushes heat from the inside of the fridge to what is apparently a huge heat core on the back. Looks like a regular fridge... but I don't think there is any coolant in these puppies. Anyways... everything seems to be running on my fridge (fans, lights, etc)... but it doesn't cool. I have read of blown caps and diodes on the power supply... but this doesn't seem to be the case for me as all of my measurements show proper power is being supplied. I suspect that the TEC is gone... so I am going to order one on Ebay and give it a shot. I just learned all of this just now so forgive me if there are any mistakes here... I am not a specialist in this field. Just wanted to share what I have learned.
The dial is set to 1 but still everything is freezing. there is this "long tube" that is...
(More)
The dial is set to 1 but still everything is freezing. there is this "long tube" that is attached form the top but not sure if that should be up against the freezer section or if this has anything to do with temp regulation. Thanks for any help
She stopped working. I took apart and the fuse on the circuit board was blewn. No holder, but...
(More)
She stopped working. I took apart and the fuse on the circuit board was blewn. No holder, but soldered in there. I soldered a fuse holder, reinstalled the fuse and it fried it. Bad circuit board?