Xbox360 contolers dropped into bleach

if you have that charging cord for the original wireless controler try plugging it up to the xbox and see if that works.

There is a XBOX 360 repair guide available that covers this problem and also all other common XBOX problems. You can get your copy XBOX 360 Repair Guide.....you can download it and get help to fix your console.......

Click here to download Microsoft xbox360 repair guide

if your trying to use the controller to play games on your pc you cant unless u buy the microsoft adapter wireless gaming adapter for your computer, if your trying to just charge it, you just connect the charge cable to your usb drive and windows will automaticly find the drivers.

I assume you are having trouble connecting a wireless controller? Make sure you press the small sync button on the Xbox as well as the guide button on the controller. If this isn't the problem, please elaborate.

You need to press the sync button on the Xbox360(little white button on the faceplate just under the DVD drive). Then you press the sync button on the wireless remote. (An even smaller little white button, on the side of the contoller that would be "facing" the 360 while you hold the controller)

remove batteries adn let them dry.step three is pray they do

well first of all if they do not work this ussaly means that the circut bored is covered in it and the electrical signals cannot be sent to the Board. what u can do is u can open up the controller and see if u can get the bleach out or i would suggest buying a new controller

press the sync button on the xbox and then the controller

mine does that too. idk if there is a way 2 fix it, but try returning it.

1. Turn XBOX360 on
2. Press the sync on the XBOX360, green lights swirl
3. Hold the center xbox logo button on the controller, lights swirl
4. Release the xbox logo button on the controller then press the sync on the controller
Good luck