I have a speedstream 5200 Ethernet/USB ADSL Modem, Part# 060-E242-A13, Mac 000B23670B13, Firmware...
(More)
I have a speedstream 5200 Ethernet/USB ADSL Modem, Part# 060-E242-A13, Mac 000B23670B13, Firmware Part # 004-E242-A0W, Configuration Part # 003-6100-G09. Recently, when I go to lower my Firewall Level to Low so I can upload files to my website, the SETUP button is missing and I have to reboot the 5200 in order for it to appear. The modem/firewall appears to be operating correctly otherwise. I have tested the firewall to see if any ports are open and all ports are in stealth mode. ICMP is disabled so my computers cannot be pinged. Everything seems ok except the SETUP button is missing until I reboot. Any idea what is causing this and what I might be able to do to fix it? Is there a new firmware upgrade available that I need to install? I?ve had this 5200 since about 2004, but can?t remember for sure exactly when I got it, other than it was probably 2004 or later. Thank you in advance for any assistance you might be able to give.
Need a MAC driver for speedstream 5200??? Is that necessary on a Mac?? the link on the website is a...
(More)
Need a MAC driver for speedstream 5200??? Is that necessary on a Mac?? the link on the website is a dead link, only shows PC drivers
my modem ip is different from my router ip and i need to login to my modem but i dont know my login,...
(More)
my modem ip is different from my router ip and i need to login to my modem but i dont know my login, is there a way i can find it out, or do you know the default login?