Question about Acer Aspire 5600 Series 5630-6951 Laptop

3 Answers

Acer notebook/laptop 5920G(acer recovery management)

Hi i used acer recovery management to make a back up disc of all files on my laptop ,while processing files to my discs for a copie
i was thinking to cancel the process , i cant do it because there was no cancel button. so i pressed ctrl-alt-delete and now i can cancel it ,but with warning that if i go on to cancel the process i can lost some details
i thougt oke am going to cancel

the next time i want use acer recovery management option
it wouldent work it said acer recovery is not responding not working error
so now i have all acer programs but now acer recovery management option
what must i do to get the recovery option file

because i dont have a acer disk
can somebody help pleassssssssssse

afz eddie

Posted by on

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 128 Answers

Perform a system recovery:
Acer computer's do not ship with recovery CD's - there is a program that allows you to burn the disks or recover.
3 ways to recover:

1. If in Windows - Start - Programs - Acer empowering technology - Acer E-recovery management -
click on Restore at bottom then "Restore to factory default settings"
2. Or click on Burn disks instead of Restore
3. If unable to boot into Windows then tap Alt/F10 during boot right after Acer splash screen when starting up the computer.
4. This will start the Acer E-recovery program - choose Factory Default Settings and follow instructions.
For Acer end user technical support, spare parts and service: 1.800.816.2237

Posted on Feb 03, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How to reset the bios ???
If you install a old bios version and the laptop doesn't start, what should you do??
There's no image on the screen !!!! Nothing!!!
Thanks and Best regards!

Posted on Jan 13, 2008

  • H F Jan 14, 2008

    sorry .... i made a mistake here. I wanted to request help, not give a solution. Sorry again !!!

×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 270 Answers

Its dangerous to stop e rcovery process . the software may get corrupted . downlaod it again from e recovery support section of acer.com /. got oto add or remove programs and unistalll the program and try re installing it again . e recovery is a system acritical processs

Posted on Dec 14, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi dennis I encounted Oxcoooooe9 on my aspire 5738 how to resolve pls advise with thanks


How do I restore my computer using the eRecovery Management program outside of Windows? How do I restore my computer using the eRecovery Management program outside of Windows?
Select models, with Microsoft Windows, have the ability to have the Operating System reinstalled from a hidden partition built into the computer.
Note: During the process, all data stored on your computer will be overwritten. This means all your files, such as email and photos, will be erased. Therefore, we recommend making a backup of all personal data before starting the recovery process.
Note: For video guided assistance using the eRecovery Management program to restore your computer please visit our How do I restore my computer using the eRecovery Management program? answer.

To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the Alt and F10 keys repeatedly.
  3. If you are prompted with a Microsoft Windows boot screen, press the Enter key.
  4. After the system recovery application has loaded, follow the prompts to reinstall the Operating System.
If the ability to reinstall from the previous method is not available or fails, recovery of the Operating System will need to be from Recovery Media. If you do not have a set of Acer Recovery Media, you may purchase the set online from the Acer Recovery Media Order Form..
Note: If your computer does not have an internal optical disc drive, an external optical disc drive will be required in order to recover the Operating System using Acer Recovery Media.
  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the F12 key repeatedly to enter the computer's Boot Menu.
  3. Press the CD-ROM drive eject button and insert the disc labeled System CD.
  4. Close the CD-ROM tray.
  5. Refer to on screen instructions to select either CDROM or USB CDROM.
  6. The computer will boot from the Acer Recovery Media
  7. When prompted for the Recovery CD, remove the System CD and insert the Recovery CD.
    Note: If there are multiple Recovery CDs, please insert the first of the Recovery CDs.
  8. After the system recovery application has loaded, follow the prompts to reinstall the Operating System.
Note: if your computer is unable to run the Acer Recovery process, or errors occur during recovery, please contact Acer support.

Jun 25, 2012 | Acer Computers & Internet

1 Answer

I need to create recovery disks for my HP Pro Book 4310s in case I need to restore it back to factory settings in the future. I just got this computer and was I told I should get this done. I am running...


Hi.

Please follow the steps to create the recovery discs using the HP Recovery Manager.


Click Start>AllPrograms>Recovery Manager.
Select Recovery Manager. This will open Recovery Manager.
Click Advanced Options. If you are using a laptopand operating on battery power alone you must connect to anAC power outlet before you can go to the next step.
Select Recovery disc creation. Click Next. The Recovery Manager will begin creating the necessaryfiles. This may take a while, so be patient until the bar has reached 100%.
Read the table of requirements thatappears. Depending on the type of discs you use, more or less may beneeded; if you use ordinary CDs, Recovery Manager will require more compared tofewer discs if DVDs are used.
Insert your first blank disc, havingmade sure it is fully labeled, such as "Recovery Disc 01" or"Recovery Disc 1 of 2". The optical drive of your computerwill have automatically opened. If not, open manually. Close the optical driveand click Next.
Understand and confirm you want to gothrough with the operation using the type of disc you have inserted by clickingNext.
Wait while Recovery Manager now createsthe first disc. This may take 20-40 minutes as it collects the files,writes the files and verifies the files to disc.
Remove the disc and insert the nextafter the first has been finished after clicking Next. Continue the creation of discs according to thenecessary requirements, up until the last has finished creating files.

Click Next after removing the disc and then Finish to complete the session. Congratulations! You havejust made yourself a set of recovery discs.

Use the recovery discs to recover yourcomputer in case of system instability or failure.


Thanks!!!!!

Dec 29, 2010 | Computers & Internet

2 Answers

How can i make factory setting for Aspire 5610 without recovery disc and/or with recovery disc


Hi,

You do not have to make factory setting, infact you can restore the computer back to factory default,to do so, follow the below steps: Turn OFF the computer, now as soon as you hit the power button, keep on holding "Alt" key & keep on tapping "F10" key, i.e Alt+F10 (try both), it will open the recovery console, select full factory restore and follow onscreen instruction. NOTE: This will erase all the datas on the computer.

Thanks and regards,
Anil.B.R

Aug 18, 2010 | Acer Aspire 5610 Notebook

2 Answers

Recovery disc


Hi,

To create an Acer recovery Disk from the computer follow the below mentioned steps:

Click Start Menu> All Programs> Acer erecovery management> Under it select the option to create Recovery Disk

Aug 02, 2010 | Acer Aspire One PC Notebook

2 Answers

I want to reset it


Unlike other laptops, Acer laptops integrate a computer management utility called 'Acer eRecovery Management' to create backup of hard drive data, create restore point, reinstall applications & drivers, and reset Acer laptop to factory setting.

Step 1: Before starting your Acer laptop, ensure that there is no external storage device attached to it. Now start your laptop.

Step 2: Press 'Alt + F10' when the laptop starts booting, and wait for a moment while Windows loads the reset files.

Step 3: When 'Acer eRecovery Management' window appears, select 'Restore System from factory default' and click 'Next' to continue.

Step 4: Again click 'Next' to reset your Acer laptop. This process will erase all data from your hard disk and reset your Acer laptop to original factory settings.

Step 5: Click 'OK' in the notification window to begin the the resetting operation. Now wait while your Acer laptop is reset to factory settings.

Tips: You can also create a backup copy of your laptop data before factory reset. Simply click 'Backup' in 'Acer eRecovery Management' window.

If you face any issue with your Acer Notebook, feel free to get expert technical assistance at
http://www.vtechsquad.com/acer-support/

Apr 04, 2010 | Acer Aspire One Netbook 8.9" Notebook

1 Answer

I have an Acer Aspire 5720, ive had it for a year now and it is starting to slow down. I have lost the booklet to it and i need to do a master reset on it. Ive already backed everything up im just finding...


This was taken straight out of the manual for your model, which can be found here.

Acer eRecovery Management
Acer eRecovery Management is a tool to quickly backup and restore the system.
You can create and save a backup of the current system configuration to hard
disk, CD or DVD. You can also backup/restore the factory default image, and
reinstall applications and drivers.

Acer eRecovery Management consists of the following functions:

1 Create backup
2 Burn backup disc
3 Restore and recovery

This chapter will guide you through each process.
Note: This feature is only available on certain models. For systems
that do not have a built-in optical disc burner, plug in an external
optical disc burner before entering Acer eRecovery Management
for optical disc-related tasks.

When using Acer eRecovery Management, you may be prompted to enter the
Empowering Technology password to proceed. The Empowering Technology
password is set using the Empowering Technology toolbar or when first running
Acer eLock Management or Acer eRecovery Management.

Create backup

You can easily create full and fast (incremental) backup images of your system
configuration to hard disk from the main Acer eRecovery Management screen.
Note: Fast (incremental) Backup is only available after a Full
Backup is made.

1 Press <Alt> + <F10> or select Acer eRecovery Management from the
Empowering Technology toolbar to start Acer eRecovery Management.
2 In the Acer eRecovery Management window, select the type of backup you
want to create using Full or Fast.
3 Follow the instructions on screen to complete the process.
83
English
Burn backup disc
Using the Burn Disc page of Acer eRecovery Management, you can burn the
factory default image, a user backup image, the current system configuration,
or an application backup image to CD or DVD.
1 Press <Alt> + <F10> or select Acer eRecovery Management from the
Empowering Technology toolbar to start Acer eRecovery Management.
2 Switch to the Burn Disc page by selecting the Burn Disc button.
3 Select the type of backup (factory default, user, current system,
application) you would like to burn to disc. Choosing to burn a user backup
will burn your most recently created backup image to disc.
4 Follow the instructions on screen to complete the process.
Note: Create a factory default image when you want to burn a
bootable disc that contains your computer's entire operating
system as it was delivered to you from the factory. If you wish to
have a disc that will allow you to browse the contents and install
selected drivers and applications, create an application backup
image instead — this disc will not be bootable.

Restore and recovery

The restore and recovery features allow you to restore or recover the system
from a factory default image, from a user created image, or from previously
created CD and DVD backups. You can also reinstall applications and drivers for
your Acer system.
1 Press <Alt> + <F10> or select Acer eRecovery Management from the
Empowering Technology toolbar to start Acer eRecovery Management.
2 Switch to the restore and recovery page by selecting the Restore button.
3 Select the backup point you would like to restore from. You can also
choose to recover the system from a factory default image, recover from a
previously created CD/DVD or reinstall applications and drivers.
4 Follow the instructions on screen to complete the process.

Dec 20, 2009 | Acer Aspire 5720 Notebook

1 Answer

I just receiver recovery and system disc from Acer to restore my laptop to factory settings. I tried couple times and followed the instructions. The recovery disc formatted partition 2 on the computer but...


Looks like your recovery cd is corrupted. You must obtain a copy of Ms Windows cd and install it using the license from the back of your laptop.If that doesn't work either its a hardware related (hdd) problem.

Aug 19, 2009 | Acer Extensa 5620-4677 Notebook

3 Answers

Acer aspire one


Hi there..
I had the same problem, but i did not geth any help..So i did find the solution by my own... Maybe i can help you...
Because they tell us to open some windows programs, but i could not even open my windows, so how i can make a recovery???
So, my friend, if you want to recovery your laptop, you shuld start him, and when he start, you press simultaneously Alt and F10. Then you can make your recovery. And look in the BIOS that is enabled Disc to disc recovery

Regards

Jernej

Nov 09, 2008 | Acer Aspire 5500 5570-2609 Laptop

3 Answers

ACER ASPIRE 1640 KEYBOARD


disable microsoft acpi-compliant control method battery under batteries in device manager

Sep 13, 2008 | Acer Aspire 1640Z Notebook

1 Answer

Acer notebook 5920G


Hi Eddie & Roger:

Your solution is here:

http://www.roundtripsolutions.com/blog/2007/10/18/300/acer-disk-to-disk-d2d-recovery-broken/

Take care and good luck to both of you.

SeekPCRepair

Dec 14, 2007 | Computers & Internet

Not finding what you are looking for?
Acer Aspire 5600 Series 5630-6951 Laptop Logo

304 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

645 Answers

Alun Cox

Level 3 Expert

2678 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...