Mitsubishi ws-55809 widescreen i have had a blurred lower screen when any words scroll across. now i have a blurred picture throughout the screen.

Your TV's Convergence may be out of line. To adjust this do the following.

1) Press the Menu button on your TV/Remote
2) Scroll through and select the "Advanced Features" Menu.
3) Select Blue Convergence
4) Use the V keys on your remote till the cross hairs are all lined up in the middle of the screen and the center one is white.
4a) You can use the "Video" button to switch between the red & blue cross hairs.

Sometimes the convergence IC's failing will cause this. Also, the coolant for the picture tube can leak onto the circuit boards causing damage. Need to have it looked at asap as the coolant problem gets continuously worse.

convergence problem...very common

bad convesion IC

Regardless, my answer stands. It needs repair by a qualified technician. Rates vary by area. Make telephone inquires.

Ur convergence it dead.U know how to solders?Buy a convergence kit.These websites have the kit.Tv repair World.com,Tv repair kits.

find your reset button

start checking caps w esr meter probally leakey cap or solder conn.

sounds like convergance ic's mits is also know for bad caps
1000uf @ 16v check for bulges on top of the cap
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

ive got the same problem on mine ita a 2001 model and also mine when you turn it on it goes off by itself and wont stay on.also mine has multiple pictures one green and one red almost as if 3d im not sure what it cost to fix it but tvs have come down so much i might just buy a new one. good luck with yours