Hi my kodak camera has a problem. When I start the camera the screen turns all blue and some letters that says, "ERROR L03" and I can't do anything at all. I already change the battery, I charged it, and I put a new memory card and still the same problem. Do you thing that there is a solution for my problem? Thank you

Diagnostic errors are not for the consumer but for the service tech, needs to go to repair shop.

Hi,
this is an hardware error. That means that your camera needs a repair. For this you have to contact Kodak under 1-800-235-6325 or you can go through the Step-by-Step solution tool under www.kodak.com/go/itg.

That will be a mechanical problem and the camera is in a need of a repair.

If your camera is Out of Warranty the repair of this model for this fault is about 88 pounds + shipping. KODAK also offers a Trade up option where you will have the opportunity to trade up to a newer model 25-30% cheaper than the market price.

In order to arrange your repair/Trade up: Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

For this problem try the following:

* Try removing the memory card and the battery
* Try using the camera w/o the memory card
* If problem still persist call the Tech Number

1800 235 6325

Hope this will help

Thanks
Byron

L03 means that the firmware does not have the correct checksum. Firmware has to be reinstalled. I can help you do this, but as firmware files and the way they are updated are considered confidential, I can't help you here in public. You can contact me at [email protected] (skype too by this e-mail).

Tom

L03 means that the firmware does not have the correct checksum. Firmware has to be reinstalled. I can help you do this, but as firmware files and the way they are updated are considered confidential, I can't help you here in public. You can contact me at [email protected] (skype too by this e-mail).

Tom

your camera will require service.
to setup a repair, please go to www.kodak.com/go/itg

My camera Kodak V1073 has an error on the screen an says " error L03" can you help me with my problem?.

I have the same problem in my Kodak Z8612 and I took it to the service center. They told me its a Lense error and the lense has to be replaced.

error l03