Question about Victor 1520-5 Calculator

Open Question

Victor 1520 calculator

The arm that hold the paper roll is broken. Is there a replacement available?

Thanks, Michael

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 234 Answers

SOURCE: Broken Paper Roll Holder

You must google to find the manufacture to find if anything is still available; but I have 2 ideas : 1. form a hard wire loop (from coat hanger or #12 guage steel wire) and attach this wire loopto the back of calculator case with screws (you'll need to make an eye loop at one end for the screw to go through). 2. make a small wood block that sits on the desk or table and make a wire loop that is held by the wood block and of course the paper roll is held by the wire loop. Goodluck, Macgivor.

Posted on Dec 07, 2009

Ad
  • 10865 Answers

SOURCE: I need the parts that hold the paper roll for

Hi. Go directly to the company for parts. Here is their link http://www.victortech.com/productLine.asp

Call them and tell them what you need.

Posted on Jul 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Please help me to load paper into the victor 1208-2 calculator


Feed the paper through the slot located just under where the roll is sitting. Once you have fed it through as far as you can, press the arrow button (the up arrow) on your calculator until it catches the paper & feeds it through the machine.

Feb 08, 2011 | Victor 1208-2 Calculator

1 Answer

I need the parts that hold the paper roll for Victor 1240-2 adding maching.


Hi. Go directly to the company for parts. Here is their link http://www.victortech.com/productLine.asp

Call them and tell them what you need.

Jul 19, 2010 | Victor Office Equipment & Supplies

1 Answer

The paper roll holder is broken on one side. Can


For most models, the holders can be replaced. You can try Universal Paper Arm Holders if you can't find one for your specific model.

Mar 25, 2010 | Office Equipment & Supplies

1 Answer

Broken Paper Roll Holder


You must google to find the manufacture to find if anything is still available; but I have 2 ideas : 1. form a hard wire loop (from coat hanger or #12 guage steel wire) and attach this wire loopto the back of calculator case with screws (you'll need to make an eye loop at one end for the screw to go through). 2. make a small wood block that sits on the desk or table and make a wire loop that is held by the wood block and of course the paper roll is held by the wire loop. Goodluck, Macgivor.

Dec 07, 2009 | Victor 1430-3 Calculator

1 Answer

How do I install adding machine paper roll


Slide off the upper cover of the calculator, and cut across the paper roll to form a clean end.
If you are mounting the roll externally (outside of the back of the calculator), then look for a slot in the rear of the calculator, which will accept the paper. Feed the end of the paper through the rear slot, and then into the internal feed slot, and hold the [FEED] key. After that, you can flip the arm back to mount the roll and replace the upper cover.
If you want to place the roll inside of the calculator, then you need to feed from the bottom of the roll into the internal feed slot, and hold the [FEED] key. After you are finished, replace the upper cover.

Nov 23, 2009 | Canon P1-DHV Calculator

1 Answer

Don't have a manual; have pulled the top off but can't figure out exactly how the paper should go in.


Slide off the upper cover of the calculator, and cut across the paper roll to form a clean end.
If you are mounting the roll externally (outside of the back of the calculator), then look for a slot in the rear of the calculator, which will accept the paper. Feed the end of the paper through the rear slot, and then into the internal feed slot, and hold the [FEED] key. After that, you can flip the arm back to mount the roll and replace the upper cover.
If you want to place the roll inside of the calculator, then you need to feed from the bottom of the roll into the internal feed slot, and hold the [FEED] key. After you are finished, replace the upper cover.

Sep 08, 2009 | Texas Instruments TI-5019 Calculator

1 Answer

How do you load the paper?


Slide off the upper cover of the calculator, and cut across the paper roll to form a clean end.
If you are mounting the roll externally (outside of the back of the calculator), then look for a slot in the rear of the calculator, which will accept the paper. Feed the end of the paper through the rear slot, and then into the internal feed slot, and hold the [FEED] key. After that, you can flip the arm back to mount the roll and replace the upper cover.
If you want to place the roll inside of the calculator, then you need to feed from the bottom of the roll into the internal feed slot, and hold the [FEED] key. After you are finished, replace the upper cover.

Aug 31, 2009 | Canon P23-DH Calculator

1 Answer

Need help replacing the paper roll on a Casio BIG 12-Digit adding machine.


Slide off the upper cover of the calculator, and cut across the paper roll to form a clean end.
If you are mounting the roll externally (outside of the back of the calculator), then look for a slot in the rear of the calculator, which will accept the paper. Feed the end of the paper through the rear slot, and then into the internal feed slot, and hold the [FEED] key. After that, you can flip the arm back to mount the roll and replace the upper cover.
If you want to place the roll inside of the calculator, then you need to feed from the bottom of the roll into the internal feed slot, and hold the [FEED] key. After you are finished, replace the upper cover.

Aug 21, 2009 | Office Equipment & Supplies

2 Answers

Victor 1520A Calculator


Coleman and other companies have repalcment add rolls parts, Some are generic and some are original..

Apr 03, 2008 | Office Equipment & Supplies

1 Answer

Replacement for broken paper roll holder


There are universal glue on paper holders available email upstateos@adelphia.net

Feb 13, 2008 | Canon P23-DH Calculator

Not finding what you are looking for?
Victor 1520-5 Calculator Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Victor Office Equipment & Supplies Experts

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

k24674

Level 3 Expert

8016 Answers

David Burbee
David Burbee

Level 3 Expert

1871 Answers

Are you a Victor Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...